legwork-tracker

name

legwork-tracker

description

Manage the legwork project queue across its full lifecycle. Use whenever the user runs /wrap, /add, /log, /shelve, /pickup or /vision, says "wrap up", "close out", "log this", "shelve", "reopen", "add a project", "change the status" or "tweak the prompt", or is clearly finishing, starting, updating or retiring work on any project. Every session that produced real work must end with a tracker update.

Legwork tracker

Legwork is a self-updating project queue. Each project is one markdown file in the legwork repo under projects/. The dashboard is generated from those files. Your job at the end of a session is to update the right file and mint the next prompt while context is still hot. This is the single habit the whole system depends on.

The legwork repo lives at $LEGWORK_DIR if set, otherwise ~/legwork.

File format

Frontmatter holds simple one-line values only:

---
name: Widget
category: work          # work | business | personal
status: queued          # queued | running | review | escalated | done | icebox
energy: deep            # deep | medium | light
description: One line that says what this is.
repo: ~/code/widget     # or: none
updated: 2026-06-09
autonomy: loop          # optional; only ever set via /vision, never assumed
account: work           # REQUIRED when category is work; runs under CLAUDE_CONFIG_DIR_WORK
blocked_on: waiting on X     # optional; the precondition the project waits on
---

account pins which Claude profile the session runs under: account: <name> fires under CLAUDE_CONFIG_DIR_<NAME>. A category: work project MUST set account: work. Without it the session falls back to CLAUDE_CONFIG_DIR -- the personal profile -- and would run work code under the personal account with nothing in the log to say so. The runner refuses to fire a work project that does not pin account: work, and refuses too when the matching CLAUDE_CONFIG_DIR_<NAME> is unset: firing under the wrong identity is worse than not firing.

blocked_on parks a project without iceboxing it: the dashboard shows the blocker on the card and the runner refuses to fire while it is set. Set it via /log when a dependency appears; clear it the same way when the blocker lifts.

Below the frontmatter, two required sections and one optional one:

• ## Vision (optional) holding the standing brief: North star, Done means, Guardrails, Escalate when, Taste. Written by /vision, replaced wholesale when re-run, never appended to like a log.
• ## Next prompt containing one fenced code block with the prompt
• ## Log containing dated bullets, newest first

Statuses

• queued: has a ready next prompt, waiting to be fired
• running: a session or external party is actively on it
• review: work finished, awaiting reviewer verdict
• escalated: blocked on a human decision
• done: shipped or complete
• icebox: deliberately shelved, no guilt attached

Icebox is a legitimate destination, not a failure state. When the user shelves something, move it there cleanly and never editorialise about it.

Vision and autonomy

The Vision section is what lets a session act while the human is away. Five bullets: North star (the finished state in one sentence), Done means (project-level completion criteria), Guardrails (what sessions must never do here), Escalate when (decisions that always go back to the human), Taste (preferences that make the work feel right).

autonomy: loop in the frontmatter opts the project into the runner (suite/legwork_runner.py, fired by launchd every five minutes): queued prompts launch as headless sessions in that repo. Headless sessions get file edits and git, nothing more by default; the repo's own .claude/settings.json allow rules grant its test and build commands, and the /vision interview is where the human adds those. Only the human sets autonomy: loop, through /vision, after hearing what it means. The runner refuses projects without a Vision section, so /vision is the single gate into autonomy.

Headless sessions run under the config dir named by CLAUDE_CONFIG_DIR when it is set, so they never inherit whatever account your interactive shell defaults to; leave it unset to use the default config. A project whose frontmatter says account: <name> fires under CLAUDE_CONFIG_DIR_<NAME> (uppercased) instead, for a dedicated config dir; only the human sets it.

Autonomous sessions follow the same rules as any session, plus two: never wait for input, and when a decision falls outside the Vision (or touches money, production deploys, credentials, sending things to people, deleting data), wrap with status escalated and a DECISION NEEDED brief instead of guessing. The Telegram loop closes the circuit: the human answers the letter or replies continue, reply capture queues the project on the remote, the runner pulls and fires the next session.

When the legwork repo has a remote (git remote prints one), every tracker operation begins with git pull --rebase there and ends with git push: n8n and other machines write decisions and minted prompts straight to the remote, so the local clone can be behind. A remoteless checkout (someone trying legwork locally) skips the pull and the push: commit locally and move on, never error on the missing remote.

1. Pull first: git pull --rebase in the legwork repo, when it has a remote; skip this when git remote prints nothing.
2. Identify the project file. If none exists, create a new projects/<kebab>.md following the File format spec above (frontmatter, ## Next prompt, ## Log).
3. Prepend a log bullet: - YYYY-MM-DD: what actually happened, one line. Never rewrite or delete old log entries. The log is append-only history.
4. Set updated to today.
5. Set the status that is true right now. If the work is finished and the review pipeline is wired, use review. If finished and there is no pipeline, use queued with a fresh prompt, or done.
6. Mint the next prompt (rules below).
7. Write a short verification summary to .legwork/last_test_output.txt in the repo you were working in (the worked-on repo, not the legwork repo unless they are the same). List the commands you ran this session and their results in a few plain lines. Create .legwork/ if absent and make sure that repo gitignores it (add .legwork/ to its .gitignore). The SessionEnd hook reads this file and forwards it to the reviewer as test evidence, so writing it stops false "no test evidence" escalations. If you genuinely ran no commands, say so in one line rather than leaving stale output from a previous session.
8. Rebuild the dashboard from the legwork repo: python3 core/build_dashboard.py — on Windows use python, as there is no python3 there beyond a stub that exits 9009 without running anything.
9. Commit your changes with an honest message, then git push when the repo has a remote: it is shared with n8n and other machines, so never leave local tracker commits unpushed. Two graceful degradations: with no remote, stop after the local commit; and if git refuses the add because /projects/ is still gitignored (a fresh clone of the public repo ships that way), skip the commit (the file is saved on disk) and point the user at SETUP.md's "Make this repo your tracker" step in your reply.

Minting the next prompt

The next prompt is the most valuable thing you write all session. It is what lets a cold session, possibly a headless one, resume without the user reloading context. Rules:

• Assume a cold start. The prompt must point at standing context first: "Read the repo's README or PROJECT.md and the last three log entries in legwork/projects/."
• One task only, small enough to finish in a single sitting. If the obvious next step is big, cut it down and put the rest in the log as a note.
• Include a Done when: line with a concrete, verifiable finish line.
• Pick the model for the task with a Model: line when it differs from the default tier: Model: haiku for mechanical chores (renames, dep bumps, formatting), Model: sonnet for routine build work, Model: opus for architecture, gnarly debugging, or writing a human will read. Optionally add Effort: low|medium|high|xhigh|max to match. Omit both to run on the account default. The runner strips these lines and passes --model/--effort; in manual sessions they are harmless context.
• End with: Final step: run /wrap to update the tracker and mint the next prompt. This keeps the chain unbroken.
• Keep the whole prompt under 15 lines.
• When the project has a Vision section, the prompt must serve it. Do not mint a prompt that drifts from the North star or crosses a Guardrail.
• For projects that are not Claude work (house moves, decisions, calls), write the next human action in the same block and open it with Human action, not a Claude session. The runner never fires these.

Escalating

When work is blocked on a decision only the user can make:

1. Set status to escalated.
2. Replace the Next prompt block with a decision brief, opening with DECISION NEEDED and containing four parts: Attempted, Uncertain, Options (two or three, lettered), Recommendation.
3. Keep it under 15 lines. The user should be able to answer with one letter.

Lifecycle

The full set of verbs. Each one ends by rebuilding the dashboard.

Add (/add). Create projects/<kebab>.md from the File format spec above, fill the frontmatter, write one honest log line, and mint a real first prompt. Ask the user only for what you cannot infer. Parallel sessions are the point of this system, so there is no cap on active projects. Staleness pills on the dashboard are the health signal.

Vision (/vision). Read the project file, its log and the target repo's docs, draft a candidate Vision, then interview the user to correct it. Write the ## Vision section between the frontmatter and ## Next prompt, replacing any previous one. Offer autonomy explicitly, naming the deal (unattended sessions that edit files and run git in that repo, a daily cap, anything more needs that repo's own allowlist); set autonomy: loop only on an explicit yes, and offer to add the repo's test and build commands to its .claude/settings.json allow rules so unattended sessions can verify their own work. Log one line either way.

Log an update (/log). For news that happened outside a work session: prepend a dated log bullet, bump updated, and adjust the status or next prompt only if the update changes them. This is also the route for edits: description changes, frontmatter fixes, status corrections.

Tweak the prompt (/log or conversation). Replace the fenced block under ## Next prompt, keeping the prompt shape rules. Note the tweak in the log if it changes what the next session will do.

Shelve (/shelve). Set status to icebox, log the reason plainly, and replace the next prompt with a one-line reopen note saying where to pick it back up. Never editorialise: shelving is a valid move, not a failure.

Deep archive. When the icebox itself gets noisy, move retired files to projects/archive/. The dashboard only reads the top level of projects/, so anything in a subfolder disappears from the view while staying in git history. Reserve this for projects that are properly over.

Reopen. Move the file back from projects/archive/ if needed, set status to queued, log the reopen and why, and mint a fresh prompt. The old reopen note tells you where to start. Never reuse a stale prompt.

Done (/wrap). Set status to done with a final log line. Done is not dead: if the project will live on, mint a standing maintenance prompt (refactors, tests, docs, dependency bumps, small improvements) so a finished project can still be picked off the dashboard and improved autonomously. Open the prompt with Maintenance pass, not new build. Deep archive properly retired projects instead.