testing-anti-patterns

name	testing-anti-patterns
description	Use when writing or changing tests, adding mocks, or tempted to add test-only methods to production code - prevents testing mock behavior, production pollution with test-only methods, and mocking without understanding dependencies

Testing Anti-Patterns

Overview

Tests must verify real behavior, not mock behavior. Mocks are a means to isolate, not the thing being tested.

Core principle: Test what the code does, not what the mocks do.

Following strict TDD prevents these anti-patterns.

The Iron Laws

1. NEVER test mock behavior
2. NEVER add test-only methods to production classes
3. NEVER mock without understanding dependencies

Anti-Pattern 1: Testing Mock Behavior

The violation:

// ❌ BAD: Testing that the mock exists
[Fact]
public void RenderPage_ShouldRenderSidebar()
{
    // Arrange
    var mockSidebar = new Mock<ISidebar>();
    var page = new Page(mockSidebar.Object);

    // Act
    var result = page.Render();

    // Assert
    mockSidebar.Verify(x => x.IsVisible, Times.Once); // Testing mock!
}

Why this is wrong:

• You're verifying the mock works, not that the component works
• Test passes when mock is present, fails when it's not
• Tells you nothing about real behavior

your human partner's correction: "Are we testing the behavior of a mock?"

The fix:

// ✅ GOOD: Test real component or don't mock it
[Fact]
public void RenderPage_ShouldIncludeSidebarContent()
{
    // Arrange
    var sidebar = new Sidebar(); // Don't mock sidebar
    var page = new Page(sidebar);

    // Act
    var result = page.Render();

    // Assert
    Assert.Contains("navigation", result.Content);
}

// OR if sidebar must be mocked for isolation:
// Don't assert on the mock - test Page's behavior with sidebar present

Gate Function

BEFORE asserting on any mock element:
  Ask: "Am I testing real component behavior or just mock existence?"

  IF testing mock existence:
    STOP - Delete the assertion or unmock the component

  Test real behavior instead

Anti-Pattern 2: Test-Only Methods in Production

The violation:

// ❌ BAD: Destroy() only used in tests
public class Session
{
    public async Task DestroyAsync()  // Looks like production API!
    {
        await _workspaceManager?.DestroyWorkspaceAsync(Id);
        // ... cleanup
    }
}

// In tests
public async Task TearDown() => await _session.DestroyAsync();

Why this is wrong:

• Production class polluted with test-only code
• Dangerous if accidentally called in production
• Violates YAGNI and separation of concerns
• Confuses object lifecycle with entity lifecycle

The fix:

// ✅ GOOD: Test utilities handle test cleanup
// Session has no Destroy() - it's stateless in production

// In TestUtilities/
public static class SessionTestHelpers
{
    public static async Task CleanupSessionAsync(Session session)
    {
        var workspace = session.GetWorkspaceInfo();
        if (workspace != null)
        {
            await WorkspaceManager.DestroyWorkspaceAsync(workspace.Id);
        }
    }
}

// In tests
public async Task TearDown() => await SessionTestHelpers.CleanupSessionAsync(_session);

Gate Function

BEFORE adding any method to production class:
  Ask: "Is this only used by tests?"

  IF yes:
    STOP - Don't add it
    Put it in test utilities instead

  Ask: "Does this class own this resource's lifecycle?"

  IF no:
    STOP - Wrong class for this method

Anti-Pattern 3: Mocking Without Understanding

The violation:

// ❌ BAD: Mock breaks test logic
[Fact]
public async Task AddServer_ShouldDetectDuplicateServer()
{
    // Mock prevents config write that test depends on!
    var mockToolCatalog = new Mock<IToolCatalog>();
    mockToolCatalog.Setup(x => x.DiscoverAndCacheToolsAsync())
               .Returns(Task.CompletedTask);

    await AddServerAsync(config);
    await AddServerAsync(config);  // Should throw - but won't!
}

Why this is wrong:

• Mocked method had side effect test depended on (writing config)
• Over-mocking to "be safe" breaks actual behavior
• Test passes for wrong reason or fails mysteriously

The fix:

// ✅ GOOD: Mock at correct level
[Fact]
public async Task AddServer_ShouldDetectDuplicateServer()
{
    // Mock the slow part, preserve behavior test needs
    var mockServerManager = new Mock<IMCPServerManager>();
    
    await AddServerAsync(config);  // Config written
    await AddServerAsync(config);  // Duplicate detected ✓
}

Gate Function

BEFORE mocking any method:
  STOP - Don't mock yet

  1. Ask: "What side effects does the real method have?"
  2. Ask: "Does this test depend on any of those side effects?"
  3. Ask: "Do I fully understand what this test needs?"

  IF depends on side effects:
    Mock at lower level (the actual slow/external operation)
    OR use test doubles that preserve necessary behavior
    NOT the high-level method the test depends on

  IF unsure what test depends on:
    Run test with real implementation FIRST
    Observe what actually needs to happen
    THEN add minimal mocking at the right level

  Red flags:
    - "I'll mock this to be safe"
    - "This might be slow, better mock it"
    - Mocking without understanding the dependency chain

Anti-Pattern 4: Incomplete Mocks

The violation:

// ❌ BAD: Partial mock - only fields you think you need
var mockResponse = new ApiResponse
{
    Status = "success",
    Data = new UserData { UserId = "123", Name = "Alice" }
    // Missing: Metadata that downstream code uses
};

// Later: breaks when code accesses response.Metadata.RequestId

Why this is wrong:

• Partial mocks hide structural assumptions - You only mocked fields you know about
• Downstream code may depend on fields you didn't include - Silent failures
• Tests pass but integration fails - Mock incomplete, real API complete
• False confidence - Test proves nothing about real behavior

The Iron Rule: Mock the COMPLETE data structure as it exists in reality, not just fields your immediate test uses.

The fix:

// ✅ GOOD: Mirror real API completeness
var mockResponse = new ApiResponse
{
    Status = "success",
    Data = new UserData { UserId = "123", Name = "Alice" },
    Metadata = new ResponseMetadata 
    { 
        RequestId = "req-789", 
        Timestamp = DateTimeOffset.UtcNow 
    }
    // All fields real API returns
};

Gate Function

BEFORE creating mock responses:
  Check: "What fields does the real API response contain?"

  Actions:
    1. Examine actual API response from docs/examples
    2. Include ALL fields system might consume downstream
    3. Verify mock matches real response schema completely

  Critical:
    If you're creating a mock, you must understand the ENTIRE structure
    Partial mocks fail silently when code depends on omitted fields

  If uncertain: Include all documented fields

Anti-Pattern 5: Integration Tests as Afterthought

The violation:

✅ Implementation complete
❌ No tests written
"Ready for testing"

Why this is wrong:

• Testing is part of implementation, not optional follow-up
• TDD would have caught this
• Can't claim complete without tests

The fix:

TDD cycle:
1. Write failing test
2. Implement to pass
3. Refactor
4. THEN claim complete

When Mocks Become Too Complex

Warning signs:

• Mock setup longer than test logic
• Mocking everything to make test pass
• Mocks missing methods real components have
• Test breaks when mock changes

your human partner's question: "Do we need to be using a mock here?"

Consider: Integration tests with real components often simpler than complex mocks

TDD Prevents These Anti-Patterns

Why TDD helps:

1. Write test first → Forces you to think about what you're actually testing
2. Watch it fail → Confirms test tests real behavior, not mocks
3. Minimal implementation → No test-only methods creep in
4. Real dependencies → You see what the test actually needs before mocking

If you're testing mock behavior, you violated TDD - you added mocks without watching test fail against real code first.

Quick Reference

Anti-Pattern	Fix
Assert on mock elements	Test real component or unmock it
Test-only methods in production	Move to test utilities
Mock without understanding	Understand dependencies first, mock minimally
Incomplete mocks	Mirror real API completely
Tests as afterthought	TDD - tests first
Over-complex mocks	Consider integration tests

Red Flags

• Assertion checks for *-mock test IDs
• Methods only called in test files
• Mock setup is >50% of test
• Test fails when you remove mock
• Can't explain why mock is needed
• Mocking "just to be safe"

The Bottom Line

Mocks are tools to isolate, not things to test.

If TDD reveals you're testing mock behavior, you've gone wrong.

Fix: Test real behavior or question why you're mocking at all.