| name | verification-before-completion |
| description | Use when about to claim work is complete, before committing or creating PRs - requires fresh verification evidence before any completion claim. Triggers on phrases like "done", "finished", "ready to commit", "all tests pass", "looks good", "should work", "I think that's it". |
| version | 1.0.0 |
| type | reference |
| attribution | Adapted from superpowers plugin (v4.3.1) by Jesse Vincent, MIT License |
Verification Before Completion
Overview
Every completion claim requires fresh evidence. No exceptions.
The Iron Law
NO COMPLETION CLAIMS WITHOUT FRESH VERIFICATION EVIDENCE.
"I believe it works" is not evidence. "The tests passed at 14:32" is evidence.
If you have not run verification commands in this session and read their output, you have not verified.
The Gate Function
Before ANY claim that work is complete, execute this sequence:
1. IDENTIFY - What claims am I about to make?
2. RUN - Execute the verification commands
3. READ - Read the actual output (not what I expect to see)
4. VERIFY - Does the output support each claim?
5. CLAIM - Only now state completion, citing evidence
Every step is mandatory. Skipping any step means the gate has not been passed.
Step 1: IDENTIFY
List every claim you are about to make. Be specific:
NOT: "It works"
YES: "All 47 tests pass, the build succeeds, and the new endpoint returns 200"
Common implicit claims to surface:
- "Tests pass" -- which tests? All of them? Just the new ones?
- "Build succeeds" -- clean build or incremental?
- "Bug is fixed" -- does the specific reproduction case now succeed?
- "No regressions" -- have you run the full test suite, not just new tests?
- "Ready to merge" -- does it pass lint, type checking, and formatting too?
Step 2: RUN
Execute the actual verification commands. Not from memory. Not from a previous run.
REQUIRED: Run the commands NOW, in this session
REQUIRED: Use the Bash tool to execute them
REQUIRED: Run the FULL suite, not a subset (unless the user explicitly scoped it)
FORBIDDEN: Assuming tests still pass from earlier
FORBIDDEN: Referencing results from before your changes
FORBIDDEN: Skipping slow tests without stating you skipped them
Step 3: READ
Read the actual output. All of it.
REQUIRED: Read exit codes
REQUIRED: Read failure messages, not just success counts
REQUIRED: Read warnings (they may indicate real problems)
FORBIDDEN: Scanning for "X tests passed" and ignoring everything else
FORBIDDEN: Assuming green because the command "looked like it worked"
Step 4: VERIFY
For each claim from Step 1, check whether the evidence supports it:
Claim: "All tests pass"
Evidence: Exit code 0, output shows "47 passed, 0 failed"
Verdict: SUPPORTED
Claim: "No regressions"
Evidence: Only ran new test file, not full suite
Verdict: NOT VERIFIED -- full suite not executed
If any claim is NOT VERIFIED, go back to Step 2 and run what's missing.
Step 5: CLAIM
State completion with evidence citations:
"Implementation complete:
- All 47 tests pass (exit code 0)
- Build succeeds (no errors, 2 warnings -- both pre-existing)
- New endpoint returns 200 with correct response body
- Lint and type checking pass"
What Each Claim Requires
| Claim | Required Evidence |
|---|
| "Tests pass" | Test runner output showing pass count, zero failures, exit code 0 |
| "Build succeeds" | Build command output with exit code 0 |
| "Bug is fixed" | Reproduction steps now produce expected behavior |
| "No regressions" | Full test suite passes (not just new tests) |
| "Feature works" | Demonstrated behavior matching acceptance criteria |
| "Ready to commit" | Tests + build + lint + type check all pass |
| "Ready for review" | All of the above + self-review completed |
| "Performance improved" | Before and after measurements with methodology |
Red Flags -- STOP and Go Back to Step 2
If you notice yourself thinking or about to write any of these, STOP:
- "Should work" -- Should is not evidence. Run it.
- "I think all tests pass" -- Think is not evidence. Run them.
- "It looks correct" -- Looks is not evidence. Verify it.
- "I'm confident this works" -- Confidence is not evidence. Prove it.
- "Tests were passing earlier" -- Earlier is stale. Run them again.
- "This is a safe change" -- Safe changes break things too. Verify.
- "It's just a typo fix" -- Typo fixes break builds. Run the build.
- Expressing satisfaction before running tests -- Satisfaction is a feeling, not a verification.
Common Rationalizations
| Rationalization | Why It Fails | What to Do Instead |
|---|
| "I just ran the tests a minute ago" | You changed code since then | Run them again |
| "This change is too small to break anything" | Small changes cause big failures | Run the verification |
| "The tests are slow, I'll skip them" | Skipped tests are unverified claims | Run them, or explicitly state "tests not run due to time constraint" |
| "I saw the output scroll by" | Scrolling past is not reading | Read the actual results |
| "The important tests pass" | Partial verification = partial claim | Run all tests or scope your claim |
| "It compiled, so it works" | Compilation proves syntax, not behavior | Run behavioral tests |
| "I'll fix that test later" | A failing test means tests don't pass | Fix it now or state the failure |
| "That failure is flaky / pre-existing" | Prove it -- show it fails on the base branch too | Verify the flake claim |
Key Patterns
After Writing Tests (Red-Green Verification)
1. Write the test
2. RUN the test -- watch it FAIL (confirms test detects the issue)
3. Write the implementation
4. RUN the test -- watch it PASS (confirms implementation works)
5. RUN the full suite -- confirm no regressions
6. NOW you can claim: "Test passes, no regressions"
After Bug Fixes
1. Reproduce the bug (run the failing case, see the failure)
2. Apply the fix
3. RUN the reproduction case -- see it succeed
4. RUN the full test suite -- no regressions
5. NOW you can claim: "Bug fixed, verified with reproduction case, no regressions"
Before Committing
1. RUN full test suite
2. RUN build command
3. RUN linter / formatter / type checker (if project uses them)
4. READ all outputs
5. ALL pass with exit code 0?
YES: Proceed to commit
NO: Fix first, then start from step 1
When Delegating to Agents
After agent completes:
1. READ the agent's claimed results
2. RUN the verification commands YOURSELF
3. Do the results match the claims?
YES: Proceed
NO: The agent's claims are wrong. Fix or re-dispatch.
NEVER trust agent completion claims without re-running verification.
When to Apply This Gate
Apply this gate before ANY of these actions:
- Telling the user "it's done" or "it works"
- Creating a git commit
- Creating or updating a pull request
- Claiming a task is complete
- Moving on to the next task
- Reporting success to the user
- Any variation of "finished", "complete", "ready", "all good"
Relationship to Other Skills
- After systematic-debugging: You've found and fixed the root cause. Now verify the fix before claiming it works.
- After test-driven-development: You've gone through red-green-refactor. Now run the full suite before claiming done.
- Before /ship commit gate: This gate runs before you reach Step 6. Fresh verification at Step 4 (tests) is mandatory.
The Bottom Line
Evidence, not confidence. Run it. Read it. Then claim it.
The cost of running verification is minutes. The cost of a false completion claim is rework, broken builds, and eroded trust.
If you cannot run the verification, say so: "I cannot verify [X] because [reason]. Do you want me to proceed without verification or investigate how to verify?"
