review

name	review
model	opus
description	Wrap up a finished change — self-review the diff, run the full test/lint gate, verify against acceptance criteria, update docs, then prepare commit/PR. Use after coding is done, when asked to "review my changes", "wrap up", "finalize", or "is this ready to merge". Final stage of the spec → plan → coding → review workflow.

Review

Goal: take a change from "code written" to "ready to ship" — verified correct, clean, and consistent with the spec, before it's committed.

When to use

• Implementation is finished (ideally via the coding skill).
• You're asked to review, wrap up, finalize, or check if a change is merge-ready.
• Final stage of the workflow: spec → plan → coding → review (+ debug).

Shared task state

Part of the task pipeline — see ../WORKFLOW.md for the full contract.

• Hydrate: resolve the active TASK-<ID>, read tasks/TASK-<ID>/task.md, spec.md, plan.md, docs/onboarding/how-to-code.md, and the diff.
• Checkpoint: write review.md and tick verified AC# in spec.md; update task.md — set review artifact changes-requested/approved, set stage: done + status: done only when approved, bump updated:, append a Pipeline Log line carrying your agent label (format: ../WORKFLOW.md → Agent handoff).
• Blocked? If the review can't complete because of an external dependency (a staging env, access, or sign-off it's waiting on), set status: blocked, note it in Blocked by:, and log it; flip back to active when it clears. A blocker defect found in review goes through debug (which sets blocked itself). blocked is involuntary — to set the task aside by choice, use pause-task. See ../WORKFLOW.md → Status values.
• Lessons: read tasks/LESSONS.md at hydrate and apply its rules; if you detect a process mistake (in this stage or an earlier one), fix it and append an L# entry there (see ../WORKFLOW.md → Lessons).

Method

0. Load the artifacts

Read the files the earlier stages produced so the review is grounded, not generic:

• tasks/TASK-<ID>/spec.md — requirements, acceptance criteria, edge cases.
• tasks/TASK-<ID>/plan.md — the intended approach and steps.
• docs/onboarding/how-to-code.md + source-structure.md — the code-style and placement rules.

1. Review the diff — independent eyes for bugs, task-grounded eyes for fit

Split the review by what kind of signal each check needs. You wrote (or drove) this code, so you are the weakest judge of its correctness — don't rely on re-reading your own diff to catch your own bugs. Get a fresh, context-free pass for that, and keep for yourself only the checks that need the task's context.

a. Delegate correctness bug-hunting to /code-review (an independent reviewer with fresh context):

• Invoke the code-review skill (via the Skill tool) at an appropriate effort — it reads the working diff and reports correctness bugs, missed edge cases, and reuse/simplification/efficiency findings without the bias of having just written the code.
• Treat its output as input: fold every finding into your Findings below. For a genuine defect, hand it to debug (it gets a BUG# + regression test); don't just hand-wave it.
• Review panel (in-stage subagents). The default is one independent pass — the single /code-review above. A panel of >1 independent reviewers is opt-in: run it when the user asks, or when a high-risk or large diff warrants more eyes (your judgement — there is no fixed size threshold). Panel members are blind to each other (each a fresh, context-free pass, optionally with different lenses — correctness, security, performance); the main thread dedups and merges their findings into Findings and owns the final verdict. If your platform can't spawn subagents, do the default correctness pass and any additional pass(es) inline yourself — never drop the coverage. See ../WORKFLOW.md → In-stage subagents for the invariants.

b. Keep the task-grounded checks here (these need spec.md/plan.md/onboarding context that an independent pass doesn't have):

• Coverage sweep — nothing missed, both ways. Walk spec.md top-down: every R# and AC# maps to a ticked S# in plan.md, and the diff actually contains that step's change. Then the reverse: every changed line traces to a planned step / spec requirement — flag anything unrelated or speculative. An R# no ticked step covers means the work isn't done, however green the gate is.
• Audit the test diff for weakened checks. Look specifically at changes to tests and checks: loosened assertions, deleted or skipped cases (.skip, xit), blindly-updated snapshots, widened types. Each one is legitimate only if traced to a spec/plan change (Change History line) — untraced, it's a blocker finding, because it silently redefines "done".
• Cross-check the diff against each spec.md edge case — confirm it's actually handled, not just assumed. Confirm the spec's Assumptions still hold in the implementation.
• Check the change followed the plan — every deviation must already be traced in plan.md (inline note / Change History per the coding contract); flag any untraced drift.
• Check code style against docs/onboarding/how-to-code.md — verify the documented rules: correct placement (right folder/file), naming, module size/responsibility, layer separation, error handling, logging, imports. Flag every deviation. If that file doesn't exist, fall back to matching neighbouring code.

2. Run the full gate

• Run the entire test suite, not just the tests for the last step — catch regressions elsewhere.
• Run lint, format check, and type-check as the project defines them (the exact commands from docs/onboarding/how-to-code.md).
• Don't proceed until these are green. If something fails, report it plainly with the output and fix before continuing. For a non-obvious failure, use the debug skill (it records the fix in tasks/TASK-<ID>/debug.md) and resume the review.

3. Verify against acceptance criteria

• Walk through each AC# in spec.md and confirm it's met by running its verify: check (the test/command/observation the spec attached to it) — tick - [x] only on a green result, not on judgement, and quote the outcome. If an AC# has no verify:, that's a spec gap: flag it as a Finding and don't tick it on a guess. Any unchecked AC# or S# means the work isn't done.
• For user-facing behavior, run the app and observe the actual result rather than trusting tests alone.

4. Update docs

• Update anything the change affects: README, API docs, docs/onboarding/*, changelog, env-var docs.

Output: write the review to the task folder

Write the result to tasks/TASK-<ID>/review.md (same TASK-<ID> as spec.md/plan.md) using the template below, then show the user a short summary.

---
task: TASK-<ID>
title: <short title>
type: review
status: changes-requested   # changes-requested | approved
created: <YYYY-MM-DD HH:MM +TZ>
updated: <YYYY-MM-DD HH:MM +TZ>
---

# Review: <title>

## Gate Results
- Tests: <pass/fail + summary>
- Lint / format / type-check: <pass/fail>

## Acceptance Criteria
- [x] AC1 — verified
- [ ] AC2 — <why not met>

## Findings
<!-- source: code-review (independent) | self (task-grounded); severity: blocker (must fix before approve) | minor (may ship as follow-up) -->
<!-- checkbox = addressed; tick it on re-review once the fix is verified -->
- [ ] [code-review][blocker] <correctness bug / missed edge case>, ref `path:line`
- [ ] [self][minor] <style deviation from how-to-code / simplification>, ref `path:line`

## Commit / PR Draft
<commit message; PR title + body if relevant>

## Follow-ups
- <known limitations or deferred work>

## Change History
- <YYYY-MM-DD HH:MM +TZ>: Reviewed.

When done — prepare commit / PR

• Summarize what changed (files + behavior) and confirm all checks passed, stating results plainly (if a test fails or a step was skipped, say so).
• Put the drafted commit message + PR title/body in review.md for the user.
• Do not run git add / commit / push — the user runs these themselves. Hand them the drafted message to use.
• Approval gate: set status: approved only when all AC#/S# are ticked, the gate is green, and no unaddressed blocker finding remains. Open minor findings don't block approval — move them to Follow-ups explicitly (never drop them silently). Anything else is changes-requested, with what's missing listed in Findings.

External phase execution

If an orchestrator launched you for the review phase only (../WORKFLOW.md → External phase execution), the rules there override the handoff below. In short: confirm the envelope with specship check TASK-<ID> --phase review --actor <codex|claude-code> --expect-revision <n> --json (exit 0 or stop), work from the named task's artifacts and diff alone, write review.md, then checkpoint task.md last with revision +1 and stop. Don't invoke coding or debug, don't call ship — skip "Next step" entirely.

Changes-requested must classify the loop-back. Artifact state alone can't say whether the fix is ordinary work or a defect hunt, so when you set review: changes-requested you must also set next_phase: to coding (findings are planned work) or debug (findings are a defect needing a repro). Leaving it unset fails the gate — specship check refuses to guess.

Re-review closes the loop. A changes-requested verdict outranks the later gates until it is satisfied, so the stage that addresses the findings hands back by setting next_phase: review (../WORKFLOW.md → the gate table). When you are relaunched for that re-review, you are re-running against a changes-requested review.md: don't start a second review file — update this one in place per "Re-review after a loop-back", tick the findings whose fixes you verified, and set review: approved only once no unaddressed blocker remains.

Next step

• approved — the task is done: hand the user the drafted commit/PR message; they run git themselves.
• changes-requested — ask the user whether to loop back: invoke the coding skill to address the Findings (or debug if a finding is a defect), then re-run this review. Keep the same TASK-<ID>; the Findings are the input for the fix. (Under ship, loop back automatically — its loop cap applies.)
• Re-review after a loop-back is targeted, not from scratch: re-run the full gate (step 2 — always), then for each finding verify its fix and tick its checkbox in review.md, re-verify only the AC#s the fixes touch, and diff-review only the new changes. Don't re-litigate code that didn't change — but a fix that touches new files gets the full task-grounded checks on those files. Update review.md in place (bump updated:, Change History line), never fork a second review file.