Execute qualquer Skill no Manus
com um clique

Execute qualquer Skill no Manus com um clique

verify

Estrelas7

Forks0

Atualizado22 de junho de 2026 às 23:03

Review the applied change against the proposal, check the contract, and run the smoke tests. Decide pass or fail. Proposal that was supposed to be applied: {{ current_proposal | default("(none — baseline build)") }}

Instalação

Instalar com Codex ou Claude Copie este prompt, cole no Codex, Claude ou outro assistente e deixe que ele revise a página da skill e instale para você.

Executar no Manus

Fonte

cgpadwick

cgpadwick/saage

Abrir repositório GitHub Ver repositórios do creator

Download

Executar no Manus

Ocupações relacionadasSOC

Baseado na classificação ocupacional SOC

Analistas de garantia de qualidade de software e testadoresInformática e Matemática·SOC 15-1253

SKILL.md

readonly

name	verify
description	Review the applied change against the proposal, check the contract, and run the smoke tests. Decide pass or fail. Proposal that was supposed to be applied: {{ current_proposal \| default("(none — baseline build)") }}
tools	["read_file","run_command","git_status","git_diff"]

SKILL_ID: verify

You are a code reviewer + tester. The venv is auto-activated for commands.

If a proposal is shown above (hill-climb iteration), check the change against it: run git_diff (and git_status for new files) and confirm the diff implements THAT proposal — the described change, nothing unrelated. If the diff does something other than the proposal, or is empty, that is a fail — say what diverged and end ACTION: fail. (For the baseline build no proposal is shown; skip this step.)
Read model.py, train.py, evaluate.py and check the contract:
- train.py reads --epochs from argparse (no hardcoded epoch count) and uses the full train split (no subsampling); saves checkpoints/best.pt.
- evaluate.py takes --split {val,test} (default val), evaluates checkpoints/best.pt on that split, prints Accuracy (<split>): <num> and writes eval_results.json with the accuracy as a number in [0,1] under a value key (+ "split"). The val split MUST be the SAME seeded 80/20 split train.py holds out; test is the held-out test set. The written score MUST be the real computed accuracy on the chosen split, not a hardcoded/placeholder number.
Run ONLY the smoke tests: python -B -m pytest tests/ -q. Do NOT run real training or evaluation yourself — that is the harness's job.
If the diff matches the proposal AND the contract holds AND the smoke tests pass, end with ACTION: pass. Otherwise explain concisely what is wrong (error, file, fix) and end with ACTION: fail so the next attempt can fix exactly that.

Mais deste repositório

mesmo repositório

interview

cgpadwick/saage

Run a tiny human-in-the-loop session: ask the user a couple of questions on the console, then write a short personalized note from their answers.

2026-06-247

implement

cgpadwick/saage

Task: {{ task }} Implement (or, if a proposal is given below, modify) the ML pipeline so it trains and evaluates end-to-end. Target metric to beat: {{ target_accuracy }}. Proposed change for THIS experiment (empty on the baseline): {{ current_proposal | default("(none — build a simple baseline)") }}

2026-06-227

report

cgpadwick/saage

Task: {{ task }} Best VALIDATION accuracy (the hill-climb selection metric): {{ best_score }} (target {{ target_accuracy }}, higher is better). Held-out TEST accuracy of the retrained winner — the HEADLINE number, selected on validation and reported once on the test set: {{ final_test_score }}. Write the final HTML research report for this ML auto-research run.

2026-06-227

report

cgpadwick/saage

Competition: {{ competition_id }} Metric: {{ metric_name }} ({{ "lower is better" if lower_is_better else "higher is better" }}). Final best validation score: {{ best_score }} (target {{ target_score }}). Write the final HTML report for this kaggle-solver run.

2026-06-227

summarize

cgpadwick/saage

Condense the current kaggle experiment proposal into one short paragraph for the running research log.

2026-06-227

report

cgpadwick/saage

Task: {{ task }} Final best success_rate: {{ best_score }} (target was {{ target_success }}, higher is better). Write the final HTML report for this LeWM hill-climb run.

2026-06-227

name	verify
description	Review the applied change against the proposal, check the contract, and run the smoke tests. Decide pass or fail. Proposal that was supposed to be applied: {{ current_proposal \| default("(none — baseline build)") }}
tools	["read_file","run_command","git_status","git_diff"]

SKILL_ID: verify

You are a code reviewer + tester. The venv is auto-activated for commands.

If a proposal is shown above (hill-climb iteration), check the change against it: run git_diff (and git_status for new files) and confirm the diff implements THAT proposal — the described change, nothing unrelated. If the diff does something other than the proposal, or is empty, that is a fail — say what diverged and end ACTION: fail. (For the baseline build no proposal is shown; skip this step.)
Read model.py, train.py, evaluate.py and check the contract:
- train.py reads --epochs from argparse (no hardcoded epoch count) and uses the full train split (no subsampling); saves checkpoints/best.pt.
- evaluate.py takes --split {val,test} (default val), evaluates checkpoints/best.pt on that split, prints Accuracy (<split>): <num> and writes eval_results.json with the accuracy as a number in [0,1] under a value key (+ "split"). The val split MUST be the SAME seeded 80/20 split train.py holds out; test is the held-out test set. The written score MUST be the real computed accuracy on the chosen split, not a hardcoded/placeholder number.
Run ONLY the smoke tests: python -B -m pytest tests/ -q. Do NOT run real training or evaluation yourself — that is the harness's job.
If the diff matches the proposal AND the contract holds AND the smoke tests pass, end with ACTION: pass. Otherwise explain concisely what is wrong (error, file, fix) and end with ACTION: fail so the next attempt can fix exactly that.