| name | CIS Ubuntu 14.04 LTS - 3.4.2 Ensure /etc/hosts.allow is configured |
| description | Verify that /etc/hosts.allow is configured to permit authorized network access |
| category | cis-os-hardening |
| version | 2.1.0 |
| author | cyberstrike-official |
| tags | ["cis","ubuntu","ubuntu-14.04","level-1","scored","tcp-wrappers","network"] |
| cis_id | 3.4.2 |
| cis_benchmark | CIS Ubuntu Linux 14.04 LTS Benchmark v2.1.0 |
| tech_stack | ["ubuntu","linux"] |
| cwe_ids | [] |
| chains_with | [] |
| prerequisites | [] |
| severity_boost | medium |
3.4.2 Ensure /etc/hosts.allow is configured (Scored)
Profile Applicability
- Level 1 - Server
- Level 1 - Workstation
Description
The /etc/hosts.allow file specifies which IP addresses are permitted to connect to the host. It is intended to be used in conjunction with the /etc/hosts.deny file.
Rationale
The /etc/hosts.allow file supports access control by IP and helps ensure that only authorized systems can connect to the system.
Audit Procedure
Run the following command and verify the contents of the /etc/hosts.allow file:
cat /etc/hosts.allow
Expected Result
The file should contain appropriate network allow rules for your environment.
Remediation
Run the following command to create /etc/hosts.allow:
echo "ALL: <net>/<mask>, <net>/<mask>, ..." >/etc/hosts.allow
where each <net>/<mask> combination (for example, "192.168.1.0/255.255.255.0") represents one network block in use by your organization that requires access to this system.
Default Value
Contents of /etc/hosts.allow file will vary depending on your network configuration.
References
- CIS Controls: 9.2 - Leverage Host-based Firewalls
Profile
- Level 1 - Server
- Level 1 - Workstation
