build-connector

name	build-connector
description	End-to-end orchestrator that creates a new connector from scratch, reviews the code, activates it in Kibana, tests it via an Agent Builder agent, iterates until quality is met, and delivers a polished result. Use when asked to build, develop, or implement a complete connector.
allowed-tools	Bash, Read, Glob, Grep, Write, Edit, Skill
argument-hint	["3rd-party-service-name"]

Build a Connector End-to-End

This skill orchestrates the full lifecycle of building a new connector for $ARGUMENTS. It chains together multiple skills and performs code review and quality verification between each stage.

Prerequisites

This skill depends on skills from other plugins. Before starting, ensure they are loaded:

• create-agent and chat-with-agent — from x-pack/platform/plugins/shared/agent_builder/.claude/skills/. Load them by reading the SKILL.md files at **/agent_builder/**/SKILL.md.

If these skills are not available when needed (Tasks 6–7), the agent creation and chat testing steps will fail.

Step 0: Create the Task List

Use TaskCreate to create all of the following tasks up front so the user can see the full plan. Set all tasks to pending initially.

1. Create the connector code — "Generate connector spec, types, and documentation for $ARGUMENTS"
2. Code review — "Review generated connector files for correctness and completeness"
3. Edit based on review — "Fix issues found during code review"
4. Wait for Kibana — "Ask user to start Elasticsearch and Kibana"
5. Activate the connector — "Create a connector instance in running Kibana"
6. Create a test agent — "Create an Agent Builder agent wired to the new connector tools"
7. Chat test — "Send a test message to the agent and observe tool calls"
8. Verify tool call quality — "Analyze chat results for successful tool executions"
9. Iterate on quality — "Fix code issues and re-test until quality bar is met"
10. Final code review — "Final review of all generated files and documentation"
11. Final chat test — "Final end-to-end conversation to confirm everything works"
12. Report completion — "Tell the user the connector is ready for manual inspection"

Set up dependencies: task 2 is blocked by 1, task 3 by 2, task 4 by 3, and so on sequentially.

Then begin working through the tasks in order.

---

Task 1: Create the Connector Code

Mark task 1 as in_progress.

Invoke the create-connector skill with $ARGUMENTS as the argument:

Skill: create-connector
Args: $ARGUMENTS

This runs in a forked context and will generate:

• A connector specification with actions, types, and icon (in src/platform/packages/shared/kbn-connector-specs/src/specs/)
• Documentation for the connector (in docs/reference/connectors-kibana/)

When complete, mark task 1 as completed.

---

Task 2: Code Review

Mark task 2 as in_progress.

Review the files generated in Task 1 using the review-connector skill. Apply its checklist to the connector spec and docs.

List all issues found. If no issues are found, note that the code looks good.

Mark task 2 as completed.

---

Task 3: Edit Based on Review

Mark task 3 as in_progress.

If issues were found in Task 2, fix them using the Edit tool. After fixing, re-read the files and verify the fixes are correct.

If the fixes are significant, do another review pass. Repeat the review/edit cycle until you're satisfied with the quality — typically 1-2 iterations.

Mark task 3 as completed.

---

Task 4: Wait for Kibana

Mark task 4 as in_progress.

Use AskUserQuestion to ask the user to start Elasticsearch and Kibana:

To test the connector, I need Elasticsearch and Kibana running. Please start them if they aren't already:

yarn es snapshot          # in one terminal
yarn start                # in another terminal

Let me know when both are ready.

Wait for the user's confirmation. Once confirmed, verify by running:

src/platform/packages/shared/kbn-connector-specs/.claude/skills/activate-connector/scripts/list_connector_types.sh

If this fails, tell the user Kibana isn't reachable yet and ask them to try again.

Mark task 4 as completed.

---

Task 5: Activate the Connector

Mark task 5 as in_progress.

Invoke the activate-connector skill:

Skill: activate-connector
Args: $ARGUMENTS

This will list available types, ask the user for credentials, and create the connector instance via the Actions API. When agentBuilder:experimentalFeatures is true, the connector's sub-actions become available to agents.

Mark task 5 as completed.

---

Task 6: Create a Test Agent

Mark task 6 as in_progress.

Invoke the create-agent skill:

Skill: create-agent
Args: $ARGUMENTS Agent

When the skill asks for tool selection, suggest including all connector tools for the newly activated connector (and no platform tools, to keep the test focused).

Mark task 6 as completed.

---

Task 7: Chat Test

Mark task 7 as in_progress.

Invoke the chat-with-agent skill to test the agent. Use the agent ID created in Task 6. The default prompt should be:

Summarize the data available to you through your tools.

Skill: chat-with-agent
Args: <agent-id-from-task-6>

Capture and analyze the full output (reasoning, tool calls, tool results, response).

Mark task 7 as completed.

---

Task 8: Verify Tool Call Quality

Mark task 8 as in_progress.

Analyze the chat output from Task 7. Check each criterion:

Success Criteria

• Tool calls executed: The agent attempted to use the connector tools
• No execution failures: Tool results do NOT contain "status":"failed" (unless the failure is due to auth/credential issues, which are not code problems)
• Meaningful results: Tool results contain actual data, not empty arrays or error messages
• Coherent response: The agent's final response makes sense and references the data

Failure Analysis

If tools failed (tool results contain "status":"failed"):

1. Check the sub-action error to see the actual error. Look at the message field in the tool result.
2. Common errors:
   • Unknown sub-action: 'name' — the sub-action name is wrong. Verify via the connector spec's actions array.
   • Unexpected parameter — the tool call passes a parameter the sub-action doesn't accept. Fix the action's Zod schema.
   • Input should be 'X' — a parameter value is invalid. Fix the action's input constraints.
   • Auth/credential errors — note this but don't count as code failure. Ask user to re-provide credentials.
3. If the error is a sub-action issue (wrong name, invalid parameters) — this needs code fixes.
4. If the error is a connector issue (wrong auth config, wrong server URL) — this needs code fixes.

Mark task 8 as completed and note whether iteration is needed.

---

Task 9: Iterate on Quality

Mark task 9 as in_progress.

If Task 8 found code issues:

1. Diagnose: Identify which files need changes (connector spec, types)
2. Verify MCP tool names (if MCP-native): Use the listTools action to discover actual tool names and schemas:

   source "$(git rev-parse --show-toplevel)/scripts/kibana_api_common.sh" && kibana_curl -X POST -H "Content-Type: application/json" \
     "$KIBANA_URL/api/actions/connector/<connector_id>/_execute" \
     -d '{"params":{"subAction":"listTools","subActionParams":{}}}'
   

3. Fix: Use Edit to fix the identified issues
4. Wait for hot-reload: Wait ~60 seconds for Kibana to hot-reload server-side changes.
5. Re-test: Run another chat test using /chat-with-agent
6. Re-verify: Check tool call quality again

Repeat this loop up to 3 times. If issues persist after 3 iterations, report the remaining problems to the user and move on.

If Task 8 found NO code issues, skip this task entirely.

Mark task 9 as completed.

---

Task 10: Final Code Review

Mark task 10 as in_progress.

Do one final review using the review-connector skill. Verify no TODOs/placeholders, consistent naming, no debug artifacts. The review skill will also run docs quality checks (docs-check-style, crosslink-validator, frontmatter-audit, content-type-checker, applies-to-tagging) on any connector docs. Make any final minor fixes if needed.

Mark task 10 as completed.

---

Task 11: Final Chat Test

Mark task 11 as in_progress.

Run one final chat conversation to confirm everything works end-to-end:

Skill: chat-with-agent
Args: <agent-id>

Use a more specific prompt this time, something like:

Search for recent items and give me a detailed summary of what you find.

Verify the agent successfully calls tools, gets results, and produces a useful response.

Mark task 11 as completed.

---

Task 12: Report Completion

Mark task 12 as completed.

Tell the user something like the below template, listing the actual file paths that were created or modified during the process:

The $ARGUMENTS connector is ready for manual inspection. Here's what was created:

Files created/modified:

• Connector spec: src/platform/packages/shared/kbn-connector-specs/src/specs/<name>/...
• Documentation: docs/reference/connectors-kibana/<name>-action-type.md

Kibana state:

• Connector created with ID: <id>
• Test agent created with ID: <id>
• Test conversations available in Agent Builder

Next steps:

1. Open Kibana and navigate to the Agent Builder to inspect the agent
2. Try chatting with the agent in the Kibana UI
3. Review the generated code and adjust as needed
4. When satisfied, commit the code changes

List the actual file paths that were created or modified during the process.