Menu
Check whether the Accelerate AI Toolkit is connected to your WordPress site and able to fetch data. Diagnoses the specific failure layer if something is wrong.
Instalar com Codex ou Claude Copie este prompt, cole no Codex, Claude ou outro assistente e deixe que ele revise a página da skill e instale para você.
Baseado na classificação ocupacional SOC
Design a new on-brand version of a block or a fresh section — "make me a variant of the hero", "design a new pricing section", "compose an on-brand version", "give me a bolder hero". Produces ready-to-use content; offers to put it in a test but never forces one. NOT for running or tracking an A/B test (use accelerate-test) or a multi-round optimization loop (use accelerate-evolve).
Improve a block over multiple rounds — "keep improving my hero", "run an optimization loop on the homepage", "autopilot the waitlist block", "evolve this section until it stops getting better". Each round fields bold new challengers, tests them, harvests the winner, and builds the next round on it. NOT for a single A/B test (use accelerate-test) or a one-off variant (use accelerate-design).
Connect the toolkit to your WordPress site. Set up credentials, generate an application password. Also triggered when the site connection is missing.
Improve a landing page. Make it convert better. What should I change on my homepage? Optimise a specific page with data-grounded recommendations and A/B test hand-off. Recommends WHAT to change across a page; NOT for composing a specific new version of one block — use accelerate-design for that.
Any question about a WordPress site — analytics, traffic, bounce rate, conversions, A/B tests, landing pages, audiences, personalization, campaigns, content performance, what to improve, how the site is doing. Routes to the right workflow.
A/B test lifecycle — plan, create, monitor, review, or end a test. What should I test? Set up a split test. How is my test doing? Is there a winner? Stop or declare a winner. NOT for composing a single on-brand variant without a test (use accelerate-design) or running a multi-round optimization loop (use accelerate-evolve).
| name | accelerate-status |
| description | Check whether the Accelerate AI Toolkit is connected to your WordPress site and able to fetch data. Diagnoses the specific failure layer if something is wrong. |
| license | MIT |
| category | diagnostics |
| parent | accelerate |
Run a layered connection diagnostic on the Accelerate AI Toolkit. Check each layer in order and stop at the first failure -- report the specific problem and its fix, not a generic "run /accelerate-connect".
Use the Bash tool:
echo "WP_API_URL=${WP_API_URL:-NOT_SET}" && echo "WP_API_USERNAME=${WP_API_USERNAME:-NOT_SET}" && echo "WP_API_PASSWORD=${WP_API_PASSWORD:+SET}"
If any variable is NOT_SET, check whether credentials exist in settings.local.json but aren't loaded into the environment (common after upgrading from an older version of the toolkit):
python3 -c "
import json, os
path = '.claude/settings.local.json'
if os.path.exists(path):
data = json.load(open(path))
env = data.get('env', {})
has_url = bool(env.get('WP_API_URL'))
has_user = bool(env.get('WP_API_USERNAME'))
has_pass = bool(env.get('WP_API_PASSWORD'))
print(f'settings_local=FOUND url={has_url} user={has_user} pass={has_pass}')
else:
print('settings_local=NOT_FOUND')
" 2>/dev/null || echo "settings_local=NOT_FOUND"
If settings_local=FOUND with all three values present but the env vars are still empty, the credentials are saved but the session needs a restart to pick them up:
❌ Credentials saved but not loaded yet
Your site credentials are saved, but this session started before they were written.
Fix: restart your agent session (close and reopen Claude Code). The credentials will
load automatically on next start.
If neither env vars nor settings.local.json have credentials:
❌ Credentials not loaded
Missing: [list which are missing, in plain English: "site address", "username", or "password"]
Fix: run /accelerate-connect to set up your site credentials, then restart your agent session.
Stop here. Do not proceed to further layers.
If all env vars ARE set, confirm they aren't stale before trusting them. A terminal opened before the last /accelerate-connect run keeps exporting the old values, and an agent restarted inside that terminal re-inherits them — every layer below would then test the wrong address. Compare the live value against the on-disk sources:
LIVE="${WP_API_URL:-}"
FILE=$(sed -n 's/^WP_API_URL=//p' ~/.config/accelerate-ai-toolkit/env 2>/dev/null | tr -d '"')
LOCAL=$(python3 -c "
import json
print(json.load(open('.claude/settings.local.json')).get('env', {}).get('WP_API_URL', ''))
" 2>/dev/null)
echo "live=$LIVE file=${FILE:-none} settings=${LOCAL:-none}"
settings has a value and live differs from it — the session started before the settings were written. Surface the "Credentials saved but not loaded yet" block above and stop.
settings is empty, file has a value, and live differs from it — the shell environment is stale; restarting the agent in this terminal will never fix it:
❌ This session is using out-of-date connection settings
Your saved settings were updated, but this session inherited older ones from a
terminal that was opened before the update.
Fix: open a new terminal window (or run `exec zsh`), then start a new agent session
from there. Restarting in this terminal will keep loading the old settings.
Stop here. Do not proceed to further layers.
live matches whichever on-disk source exists (or no on-disk source is found) — proceed to Layer 2.
Use the Bash tool:
NPX_PATH=$(command -v npx 2>/dev/null)
NPX_VER=$(npx --version 2>&1 | head -1)
NPX_REAL=$(realpath "$NPX_PATH" 2>/dev/null || echo "$NPX_PATH")
echo "path=$NPX_REAL version=$NPX_VER"
Check both:
10.8.2), not an errornode, npm, nvm, fnm, volta, or is in /usr/local/bin, /usr/bin, or a Homebrew prefix)If npx is missing, returns a non-semver version, or resolves to an unexpected location:
❌ Cannot start the site connector
The toolkit uses a Node.js tool to connect to your site, but it doesn't appear to be
available in your current shell -- another tool may be intercepting it.
Fix: open a regular terminal and run `npx --version`. If it shows a version number there,
see the troubleshooting section in the installation guide for how to fix this.
Stop here.
Before reaching out to the site, classify what's stored in WP_API_URL. The toolkit now saves the full connector URL (e.g. https://example.com/wp-json/mcp/mcp-adapter-default-server), but older installs may still hold the bare site root.
Use the Bash tool:
python3 - "$WP_API_URL" <<'PY'
import sys
from urllib.parse import urlparse, urlunparse
raw = sys.argv[1].rstrip('/')
parsed = urlparse(raw)
path = parsed.path or ''
if path.endswith('/wp-json/mcp/mcp-adapter-default-server'):
shape = 'full_adapter'
root = urlunparse(parsed._replace(path=path[:-len('/wp-json/mcp/mcp-adapter-default-server')]))
elif path.endswith('/wp-json/wp/v2/wpmcp'):
shape = 'full_legacy'
root = urlunparse(parsed._replace(path=path[:-len('/wp-json/wp/v2/wpmcp')]))
elif path in ('', '/'):
shape = 'bare_root'
root = urlunparse(parsed._replace(path=''))
else:
shape = 'unknown'
root = raw
print(f"shape={shape} root={root}")
PY
Use the printed root value as SITE_ROOT for every check below. Use the printed shape to decide whether to nudge the user about a stale config in Layer 7.
If shape=unknown, treat it as a bare-root for the curl checks but stop after Layer 7 with:
❌ Connection address looks invalid
The saved site address has an unrecognised path. The toolkit can't tell which
WordPress connector to use.
Fix: run /accelerate-connect to re-detect the right address.
Use the Bash tool:
curl -s -o /dev/null -w '%{http_code}' "$SITE_ROOT/wp-json/" 2>/dev/null
If the response is not 200:
❌ Cannot reach your site
URL: [SITE_ROOT, without showing the variable name]
Fix: check that the address is correct and the site is reachable in a browser.
Stop here.
Use the Bash tool:
curl -s -o /dev/null -w '%{http_code}' -u "$WP_API_USERNAME:$WP_API_PASSWORD" "$SITE_ROOT/wp-json/wp/v2/users/me" 2>/dev/null
If the response is 401 or 403:
❌ Authentication failed
Your application password was rejected by the site. It may be wrong, expired, or revoked.
Fix: run /accelerate-connect and generate a fresh application password.
Stop here.
Use the Bash tool:
curl -s -o /dev/null -w '%{http_code}' -u "$WP_API_USERNAME:$WP_API_PASSWORD" "$SITE_ROOT/wp-json/accelerate/v1" 2>/dev/null
If the response is 404:
❌ Accelerate not found on your site
Your site is reachable and your credentials work, but Accelerate doesn't appear to be
active or the Abilities feature isn't turned on yet.
Fix: check that Accelerate is installed and active in your WordPress admin, and that
the Abilities feature is enabled. See the installation guide for instructions.
Stop here.
Use the Bash tool:
ADAPTER=$(curl -s -o /dev/null -w '%{http_code}' -u "$WP_API_USERNAME:$WP_API_PASSWORD" "$SITE_ROOT/wp-json/mcp/mcp-adapter-default-server" 2>/dev/null)
LEGACY=$(curl -s -o /dev/null -w '%{http_code}' -u "$WP_API_USERNAME:$WP_API_PASSWORD" "$SITE_ROOT/wp-json/wp/v2/wpmcp" 2>/dev/null)
echo "adapter=$ADAPTER legacy=$LEGACY shape=$shape"
Decide the outcome from shape, adapter, and legacy:
Full URL saved (shape=full_adapter or shape=full_legacy) and the matching route responds (405, 200, or 401) — healthy, proceed to Layer 8. (The adapter route is POST-only, so a GET returns 405 when it exists — that's the expected healthy signal, not 200.)
Full URL saved but the matching route returns 404 — the connector that was working at setup time has gone away. Surface:
❌ WordPress connector not responding
Accelerate is running but the connector address saved during setup no longer responds.
Fix: run /accelerate-connect to re-detect the connector address.
Bare-root saved (shape=bare_root) and legacy responds (405/200/401) — legacy wordpress-mcp site, still healthy. Proceed to Layer 8 silently.
Bare-root saved (shape=bare_root), legacy is 404, but adapter responds (405/200/401) — saved config is stale. The bundled client falls back to the legacy route for bare-root values, so traffic is hitting a 404. Surface:
❌ Saved connection is out of date
Your site uses a newer WordPress connector than the one the toolkit was set up against.
Fix: run /accelerate-connect to re-detect the right address. (One-time fix.)
Both routes 404 —
❌ WordPress connector not responding
Accelerate is running but no WordPress connector responded.
Fix: check with your site administrator, or see the installation guide for setup details.
Stop here unless the outcome above said to proceed.
Check whether the mcp__wordpress__mcp-adapter-execute-ability tool is available in this session.
If it is not available but all previous layers passed:
❌ Site is reachable but the connector isn't running in this session
Your credentials and site are fine, but the background connector process hasn't started.
Fix: restart your agent session (close and reopen Claude Code or Codex). The connector
starts automatically when the session begins. If you've already restarted and it still
fails, open a new terminal window first — an old terminal can feed every new session
out-of-date connection settings.
Stop here.
This is a non-blocking check. Unlike every layer above, it never stops the flow -- if it finds a problem it records a single warning line and continues to Layer 9. If it finds nothing, it stays completely silent.
Sites running a version of Accelerate older than the minimum below have a server-side bug that breaks entry-page ranking data. The deployed version is detectable from the homepage without touching the site's settings.
The minimum supported version is 4.2.0. (Maintenance: bump MIN_VERSION below when the floor changes.)
Use the Bash tool:
MIN_VERSION="4.2.0"
DETECTED=$(curl -s "$SITE_ROOT/" 2>/dev/null | grep -oE 'accelerate\.[0-9][0-9a-z.]*\.js' | head -1 | sed -E 's/^accelerate\.(.*)\.js$/\1/')
if [ -z "$DETECTED" ]; then
echo "version=none"
else
OLDER=$(printf '%s\n%s\n' "$MIN_VERSION" "$DETECTED" | sort -V | head -1)
if [ "$DETECTED" != "$MIN_VERSION" ] && [ "$OLDER" = "$DETECTED" ]; then
echo "version=$DETECTED status=older"
else
echo "version=$DETECTED status=ok"
fi
fi
version=none — the version couldn't be determined (homepage doesn't embed the marker, a custom build, or a development version string). Skip silently: no warning, no mention. Proceed to Layer 9.
status=ok — the site is on a supported version. Proceed to Layer 9 silently.
status=older — record this warning line and carry it into the final summary, then proceed to Layer 9:
⚠️ Your site is running an older version of Accelerate ([DETECTED version]). Some analytics
views (like entry-page rankings) won't work until it's updated.
Fix: ask whoever maintains your site to update the Accelerate plugin.
When the remaining layers all pass, render the healthy status from Layer 9 as normal, then append this warning line beneath it.
If all layers pass, do all three of these in order:
mcp__wordpress__mcp-adapter-discover-abilities and count the returned entries whose name starts with accelerate/. Ignore the mcp-adapter/* wrapper tools — those are transport, not capabilities.accelerate/get-site-context with include_blocks: false to grab basic site info.accelerate/get-audience-fields as a capability ping.Present the healthy status using the dynamic count from step 1:
✅ Connected to [site name]
URL: [site URL]
Accelerate capabilities available: [count from step 1, e.g. "39"]
Ready for questions.
Fallback: if step 1 (discover-abilities) errored but both smoke tests in steps 2 and 3 succeeded, the connection is still healthy — surface success without the count line rather than guessing or printing 3:
✅ Connected to [site name]
URL: [site URL]
Ready for questions.
If a smoke test fails with a permission error:
⚠️ Connected to [site name] with limited access
URL: [site URL]
Your account doesn't have permission for some features. Analytics and testing require
a WordPress role that can edit content (e.g. Editor, Author). Some admin actions
(stopping tests, broadcasts, exports) require an administrator role.
Ask your site administrator to check your role.