Build a correct LangGraph 1.0 StateGraph — typed TypedDict state with reducers,
nodes, edges, compile, and recursion budgets — without hitting the silent-termination
and state-replacement traps. Use when writing your first LangGraph StateGraph,
diagnosing why a graph halted without reaching END, or picking recursion_limit.
Trigger with "langgraph statgraph", "langgraph basics", "GraphRecursionError",
"langgraph conditional edges".
Instalar com Codex ou Claude Copie este prompt, cole no Codex, Claude ou outro assistente e deixe que ele revise a página da skill e instale para você.
Um comando direto ignora o prompt de revisão. Verifique a origem antes de executá-lo.
Build a correct LangGraph 1.0 StateGraph — typed TypedDict state with reducers,
nodes, edges, compile, and recursion budgets — without hitting the silent-termination
and state-replacement traps. Use when writing your first LangGraph StateGraph,
diagnosing why a graph halted without reaching END, or picking recursion_limit.
Trigger with "langgraph statgraph", "langgraph basics", "GraphRecursionError",
"langgraph conditional edges".
Designed for Claude Code, also compatible with Codex
LangChain LangGraph Basics (Python)
Overview
A conditional edge whose router returns a string that is not in path_map halts
the graph without reaching END. No exception. No log line. The invocation just
returns whatever state existed at the halt point — pain-catalog entry P56, and
the single most common reason a newly wired StateGraph "almost works." The
sibling pain: Command(update={"messages": [msg]}) wipes the prior message
history because messages was declared as a plain list[AnyMessage] instead of
Annotated[list[AnyMessage], add_messages] — the reducer is what turns update
into "append" instead of "replace" (P18).
Two more gotchas this skill defuses:
P55 — GraphRecursionError: Recursion limit of 25 reached fires on graphs
that never loop, because recursion_limit counts supersteps (one step
per synchronous batch of node executions), not loop iterations. A planner
executor + validator + summarizer can hit 25 without any cycle.
P20 — Upgrading langgraph silently reads old PostgresSaver checkpoints
as empty state. Checkpoint schemas evolve; PostgresSaver.setup() must be
rerun after every version bump before production traffic.
This skill walks through a minimal StateGraph end to end: a TypedDict state
with reducers on every list field, node functions that return partial-state
dicts, edges and defensive conditional edges with END as a fallback in
path_map, compilation with a checkpointer, recursion_limit sizing, and
invocation with an explicit thread_id. Pin: langgraph 1.0.x,
langchain-core 1.0.x. Pain-catalog anchors: P16, P18, P20, P55, P56.
A chat model (see langchain-model-inference), or a pure-logic graph with no LLM
For persistence beyond a single process: pip install langgraph-checkpoint-postgres and a Postgres 14+ instance
Instructions
Step 1 — Define state as a TypedDict with reducers on list fields
Every list-shaped field in state needs a reducer. Without one,
and node returns the field. The message-history reducer lives in
:
Command(update=...)
replace
langgraph.graph.message
from typing import Annotated, TypedDict
from langchain_core.messages import AnyMessage
from langgraph.graph.message import add_messages
import operator
classAgentState(TypedDict):
# Reducer "add_messages" appends + dedupes by message id (P18)
messages: Annotated[list[AnyMessage], add_messages]
# Plain list field also needs a reducer — use operator.add to concat
scratchpad: Annotated[list[str], operator.add]
# Scalars don't need a reducer; update replaces them
step_count: int
done: bool
If you forget the reducer on messages, a resume with
Command(update={"messages": [new_msg]}) will overwrite the entire prior
history. Validate reducers are in place with graph.get_graph().draw_mermaid() —
annotated fields render with their reducer name.
See State Reducers for the built-in list
(add_messages, operator.add, max, min) and how to write a custom merger
for non-trivial merge logic.
Step 2 — Write nodes as functions that return partial-state dicts
A node takes the full state and returns only the keys it wants to update. The
reducer handles merge:
Nodes must be deterministic on their inputs — LangGraph re-runs them during
time-travel replay, and a side-effecting node (DB write without idempotency key)
will double-fire. Push side effects to the checkpointer boundary or tool calls.
Step 3 — Wire edges and conditional edges defensively
from typing importLiteralfrom langgraph.graph import StateGraph, START, END
# Router MUST return a value in the path_map keyset (P56)defshould_continue(state: AgentState) -> Literal["execute", "end"]:
if state["done"] or state["step_count"] >= 10:
return"end"return"execute"
builder = StateGraph(AgentState)
builder.add_node("plan", plan)
builder.add_node("execute", execute)
builder.add_edge(START, "plan")
# path_map ALWAYS includes END as a fallback — if the router returns anything# else, the graph reaches END instead of halting silently (P56)
builder.add_conditional_edges(
"plan",
should_continue,
path_map={"execute": "execute", "end": END},
)
builder.add_edge("execute", "plan") # loop back to plan
The Literal return annotation on should_continue is a static guard — mypy
catches typos before runtime. path_map={"execute": "execute", "end": END}
is the spelled-out form; the compact form path_map=["execute", END] also works
when router return values match node names directly.
See Conditional Edges for all four
add_conditional_edges signatures, the path vs path_map distinction, and
a pytest pattern that asserts every router return value hits a known route.
Step 4 — Compile with a checkpointer
from langgraph.checkpoint.memory import MemorySaver
# MemorySaver is in-process — use PostgresSaver in production (P20)
checkpointer = MemorySaver()
graph = builder.compile(checkpointer=checkpointer)
For production, swap to langgraph.checkpoint.postgres.PostgresSaver. After
every langgraph version bump, run PostgresSaver.setup() in staging before
prod traffic — the schema evolves and old rows are silently read as empty state.
Step 5 — Pick recursion_limit for the graph's superstep count
recursion_limit defaults to 25. It is not a loop counter; it counts
total supersteps, and a superstep is one synchronous round of node
executions (parallel branches in the same step count as one). Typical shapes:
Graph shape
Supersteps per run
Suggested recursion_limit
Simple ReAct agent (plan → tool → observe → done)
6-12
15
Planner + executor + validator
12-25
30
Deep agent with sub-plans, reflection, branch merge
If you hit GraphRecursionError on a graph that clearly isn't looping (P55),
add print(state["step_count"]) at the entry of each node to see the actual
superstep count, then either raise the limit or restructure with a subgraph
so each subgraph gets its own budget.
See Recursion Limits for the full derivation
and a diagnostic script that traces superstep count at runtime.
Step 6 — Invoke with thread_id in config["configurable"]
Every invocation against a checkpointer-backed graph needs a thread_id in
config["configurable"]. Without it, each call gets a fresh state with no
warning (P16). Enforce it at your application boundary:
See First Graph Walkthrough for a
line-by-line annotation of a minimal 3-node graph that demonstrates typed
state, a reducer, and a conditional edge to END.
Decision Tree
Is your field a list you want to append?
-> Annotate with add_messages (for messages) or operator.add (for plain lists)
Is your router adding a new output string?
-> Add that string to path_map BEFORE deploying; include END as a fallback
Hitting GraphRecursionError on a non-looping graph?
-> supersteps != iterations; raise recursion_limit to 50 or split into subgraphs
Upgraded langgraph minor version?
-> Re-run PostgresSaver.setup() in staging before routing prod traffic
Multi-turn agent forgets between calls?
-> thread_id missing from config["configurable"] — enforce at boundary
Output
TypedDict state with reducer annotations on every list field
Node functions returning partial-state dicts, free of hidden side effects
Conditional edges with Literal-typed routers and END in every path_map
Compiled graph with a checkpointer matched to the deployment shape
recursion_limit sized from the superstep count table, not the default 25
Invocations with explicit thread_id validated at the app boundary
Error Handling
Error
Cause
Fix
GraphRecursionError: Recursion limit of 25 reached
Supersteps counter, not loops (P55)
Raise recursion_limit or split into subgraphs; add per-node logging to count actual steps
Graph halts without reaching END, no error
Router returned a value not in path_map (P56)
Type router as Literal[...]; include END as a default key in path_map
Command(update={"messages": [msg]}) wipes history
Missing reducer on list field (P18)
Annotate as Annotated[list[AnyMessage], add_messages]
Multi-turn memory resets between calls, no warning
Missing thread_id in config (P16)
Assert config["configurable"]["thread_id"] at app boundary
Run PostgresSaver.setup() in staging after every langgraph bump
TypeError: Object of type datetime is not JSON serializable at interrupt
Non-primitive in state (P17)
Keep state primitives-only; serialize complex types to ISO strings
Node runs twice during replay
Time-travel re-executes deterministic nodes
Push side effects to tools or the checkpointer write boundary
Examples
Building a minimal linear graph (no loop)
Three nodes (plan → execute → summarize), no conditionals, one reducer on
messages. Runs in 4 supersteps (START counts as one). Safe at default
recursion_limit=25, but set it to 10 explicitly so readers see the budget.
See First Graph Walkthrough for the
line-by-line annotation and the graph.get_graph().draw_mermaid() output.
Adding a conditional loop with a bounded retry budget
A validator node that either completes ("end" → END) or retries
("retry" → back to executor), bounded by step_count >= 3. The router is
Literal["retry", "end"] and path_map maps both. Caps at 7 supersteps, so
recursion_limit=15 is plenty of headroom.
See Conditional Edges for the full example
and the pytest that iterates every Literal branch.
Diagnosing a mystery GraphRecursionError
A planner that fans out to 4 parallel executors, then a validator, then a
summarizer. Looks linear in the mermaid diagram, hits
GraphRecursionError: Recursion limit of 25 reached on 10% of runs. Cause:
each parallel executor counts as its own superstep branch when the merge node
is conditional. Fix: raise to 50 or wrap the fan-out in a subgraph.
See Recursion Limits for the diagnostic
script and the subgraph refactor.
