dspy-miprov2

name

dspy-miprov2

description

Use when you want the highest-quality prompt optimization DSPy offers — jointly optimizes instructions and few-shot demos, with auto=light/medium/heavy presets. Common scenarios - you want the best possible accuracy from prompt optimization, jointly tuning instructions and few-shot demonstrations, using auto presets for different compute budgets, or when COPRO or BootstrapFewShot alone are not reaching your accuracy target. Related - ai-improving-accuracy, dspy-copro, dspy-bootstrap-few-shot. Also used for dspy.MIPROv2, best DSPy optimizer, highest quality optimization, auto=light medium heavy, joint instruction and demo optimization, most powerful prompt optimizer, MIPROv2 vs COPRO vs BootstrapFewShot, which optimizer should I use, state of the art prompt optimization, when to use MIPROv2, optimize both instructions and examples, heavy optimization for production, best optimizer for accuracy.

Optimize Prompts with MIPROv2

Guide the user through using dspy.MIPROv2, DSPy's most powerful prompt optimizer. MIPROv2 jointly optimizes instructions and few-shot demonstrations to maximize a metric on your training data.

What is MIPROv2

MIPROv2 (Multi-prompt Instruction PRoposal Optimizer v2) is DSPy's recommended optimizer for prompt optimization. Unlike simpler optimizers that only tune few-shot examples, MIPROv2 jointly optimizes:

1. Instructions — the natural-language task descriptions in each module's prompt
2. Few-shot demonstrations — the input-output examples included in each module's prompt

It works by proposing candidate instructions, bootstrapping demonstrations, and searching over combinations using Bayesian optimization. The result is a program with better prompts that produce higher-quality outputs.

When to use MIPROv2

• Production optimization — you want the best prompt quality DSPy can deliver
• 50+ training examples — MIPROv2 needs enough data to search effectively
• Both instructions and demos matter — you want the optimizer to tune everything, not just examples
• You have budget for multiple LM calls — MIPROv2 is more expensive than BootstrapFewShot but produces better results

If you have fewer than 50 examples or need a quick first pass, start with BootstrapFewShot (see /dspy-bootstrap-few-shot), then upgrade to MIPROv2.

Basic usage

import dspy
from dspy.evaluate import Evaluate

lm = dspy.LM("openai/gpt-4o-mini")  # or "anthropic/claude-sonnet-4-5-20250929", etc.
dspy.configure(lm=lm)

# 1. Your program
qa = dspy.ChainOfThought("question -> answer")

# 2. Your data (mark which fields are inputs)
trainset = [
    dspy.Example(question="What is the capital of France?", answer="Paris").with_inputs("question"),
    dspy.Example(question="What is 2+2?", answer="4").with_inputs("question"),
    # 50-200+ examples recommended
]

devset = [
    dspy.Example(question="Who wrote Hamlet?", answer="Shakespeare").with_inputs("question"),
    # 20-50 held-out examples for evaluation
]

# 3. Your metric
def metric(example, prediction, trace=None):
    return prediction.answer.strip().lower() == example.answer.strip().lower()

# 4. Optimize with MIPROv2
optimizer = dspy.MIPROv2(metric=metric, auto="medium")
optimized = optimizer.compile(qa, trainset=trainset)

# 5. Evaluate improvement
evaluator = Evaluate(devset=devset, metric=metric, num_threads=4, display_progress=True)
score = evaluator(optimized)
print(f"Optimized score: {score:.1f}%")

# 6. Save
optimized.save("optimized_qa.json")

The auto parameter

The auto parameter controls how much computation MIPROv2 uses. It sets the number of instruction candidates, demo candidates, and search trials automatically:

Level	What it does	Typical cost	When to use
"light" (default)	Fewer candidates, fewer trials	~$1-2	Quick experiments, early iteration
"medium"	Balanced search	~$5-10	Recommended starting point for most tasks
"heavy"	More candidates, more trials	~$15-30	Production, maximum quality

# Quick experiment
optimizer = dspy.MIPROv2(metric=metric, auto="light")

# Balanced (recommended starting point)
optimizer = dspy.MIPROv2(metric=metric, auto="medium")

# Maximum quality
optimizer = dspy.MIPROv2(metric=metric, auto="heavy")

Start with "medium". Only move to "heavy" if you have a large trainset (200+), a meaningful metric, and the budget for it. Use "light" for quick sanity checks during development.

What MIPROv2 tunes

MIPROv2 optimizes every dspy.Predict (or dspy.ChainOfThought, etc.) module in your program. For each module, it tunes:

Instructions

MIPROv2 generates candidate instructions by analyzing your training data and the task structure. It proposes multiple phrasings, then searches for the combination that maximizes your metric.

Few-shot demonstrations

MIPROv2 bootstraps demonstrations by running your program on training examples and keeping successful traces (where the metric passes). It then selects which demos to include in each module's prompt.

Joint optimization

The key advantage over simpler optimizers: MIPROv2 searches over combinations of instructions and demos together. Good instructions may need different demos than mediocre instructions, and MIPROv2 finds the best pairing.

Key parameters

optimizer = dspy.MIPROv2(
    metric=metric,          # Required: your metric function
    auto="medium",          # "light", "medium", "heavy" — controls search budget
)

optimized = optimizer.compile(
    my_program,             # Required: the program to optimize
    trainset=trainset,      # Required: list of dspy.Example with .with_inputs()
)

Manual configuration (advanced)

If auto does not give you enough control, you can set parameters directly:

optimizer = dspy.MIPROv2(
    metric=metric,
    auto=None,                      # Disable auto presets for manual control
    num_candidates=10,              # Number of instruction candidates per module
    max_bootstrapped_demos=4,       # Max bootstrapped demos per module
    max_labeled_demos=4,            # Max labeled demos per module
)

optimized = optimizer.compile(
    my_program,
    trainset=trainset,
    num_trials=30,                  # Bayesian optimization trials (passed to compile, not constructor)
)

Most users should stick with auto. Manual configuration is useful when you want to fine-tune the search budget or when you have domain-specific constraints (e.g., limiting demo count to keep prompts short).

Computational cost

MIPROv2 makes many LM calls during optimization. The cost depends on:

• auto level — "heavy" makes roughly 5-10x more calls than "light"
• Number of modules — programs with multiple Predict/ChainOfThought modules cost more
• Trainset size — more examples means more bootstrapping runs
• Model cost — using GPT-4o costs more per call than GPT-4o-mini

Cost management tips

1. Develop with "light", ship with "medium" or "heavy" — iterate cheaply, then invest in the final optimization
2. Use a cheaper model for optimization, then evaluate on the target model — if your production model is expensive, optimize with a cheaper one first to validate the approach
3. Start with fewer training examples — 50-100 examples is enough for "light" and "medium"; scale up for "heavy"
4. Set num_threads in your evaluator to parallelize evaluation calls

Typical wall-clock time

auto level	50 examples	200 examples
"light"	2-5 min	5-15 min
"medium"	10-20 min	20-40 min
"heavy"	30-60 min	1-3 hours

Times vary significantly based on model latency, number of modules, and thread count.

Comparison with other optimizers

	MIPROv2	BootstrapFewShot	SIMBA	BetterTogether	GEPA
Tunes instructions	Yes	No	Yes	Yes	Yes
Tunes demos	Yes	Yes	Yes	Yes	No
Joint optimization	Yes	No	Yes	Yes (alternating)	No
Min examples	~50	~10	~50	~50	~20
Typical improvement	15-35%	5-20%	15-35%	15-35%	10-25%
Cost	Medium-High	Low	Medium-High	High	Low
Best for	Production prompts	Quick start	Iterative refinement	Multi-strategy	Few examples, instruction-only, feedback-driven

When to use what

• BootstrapFewShot — first optimization pass, quick iteration, small datasets
• MIPROv2 — best prompt optimization, production use, 50+ examples
• SIMBA — iterative refinement with support for minibatching; good alternative to MIPROv2
• BetterTogether — alternates between prompt optimization and fine-tuning for maximum quality
• GEPA — instruction-only tuning with textual feedback, 20-100 examples
• BootstrapFinetune — fine-tuning model weights (different category entirely)

Stacking optimizers

A common pattern is to run BootstrapFewShot first, then MIPROv2 on the result. Bootstrap finds good demonstrations quickly, then MIPRO refines the instructions around them:

# Step 1: Quick bootstrap
bootstrap = dspy.BootstrapFewShot(metric=metric, max_bootstrapped_demos=4)
bootstrapped = bootstrap.compile(my_program, trainset=trainset)

# Step 2: Refine with MIPROv2
mipro = dspy.MIPROv2(metric=metric, auto="medium")
final = mipro.compile(bootstrapped, trainset=trainset)

This often beats running either optimizer alone.

Save and load

# Save the optimized program
optimized.save("optimized_program.json")

# Load later
from my_module import MyProgram  # your program class
loaded = MyProgram()
loaded.load("optimized_program.json")

# Use it
result = loaded(question="What is DSPy?")

Optimized prompts are model-specific. If you switch LM providers or models, re-run the optimizer. See /ai-switching-models.

Common patterns

Evaluate before and after

Always measure the baseline before optimizing so you know the improvement:

from dspy.evaluate import Evaluate

evaluator = Evaluate(devset=devset, metric=metric, num_threads=4, display_table=5)

# Baseline
baseline_score = evaluator(my_program)

# Optimize
optimizer = dspy.MIPROv2(metric=metric, auto="medium")
optimized = optimizer.compile(my_program, trainset=trainset)

# Compare
optimized_score = evaluator(optimized)
print(f"Baseline:  {baseline_score:.1f}%")
print(f"Optimized: {optimized_score:.1f}%")
print(f"Delta:     {optimized_score - baseline_score:+.1f}%")

Trace-aware metric for better demos

Use the trace parameter to require stricter quality during optimization. This makes MIPROv2 select higher-quality demonstrations:

def metric(example, prediction, trace=None):
    correct = prediction.answer.strip().lower() == example.answer.strip().lower()
    if trace is not None:
        # During optimization: require reasoning too
        has_reasoning = len(getattr(prediction, "reasoning", "")) > 50
        return correct and has_reasoning
    return correct

Multi-module programs

MIPROv2 optimizes all modules in your program. For a multi-step pipeline, each module gets its own optimized instructions and demos:

class RAGPipeline(dspy.Module):
    def __init__(self):
        self.retrieve = dspy.Retrieve(k=3)
        self.generate = dspy.ChainOfThought("context, question -> answer")

    def forward(self, question):
        context = self.retrieve(question).passages
        return self.generate(context=context, question=question)

rag = RAGPipeline()
optimizer = dspy.MIPROv2(metric=metric, auto="medium")
optimized_rag = optimizer.compile(rag, trainset=trainset)

Gotchas

1. Claude sets auto="heavy" by default for production. The auto parameter defaults to "light", and "medium" is the recommended starting point. Heavy is 5-10x more expensive and only justified with 200+ examples and a well-validated metric. Start with "medium" and upgrade only if the score plateaus.
2. Claude passes trainset as a positional argument to compile(). The trainset parameter is keyword-only in MIPROv2: optimizer.compile(program, trainset=trainset), not optimizer.compile(program, trainset). Passing it positionally raises a TypeError.
3. Claude forgets .with_inputs() on training examples. Every dspy.Example in the trainset must call .with_inputs("field1", "field2") to mark which fields are inputs vs labels. Without this, MIPROv2 cannot distinguish inputs from expected outputs and optimization silently underperforms.
4. Claude sets num_candidates without also setting num_trials. When using manual configuration (no auto), both num_candidates and num_trials must be set. Setting only one produces suboptimal search — more candidates without enough trials to evaluate them is wasted compute.
5. Claude uses the deprecated requires_permission_to_run parameter. This parameter is deprecated. Passing True raises an error; False logs a deprecation warning. Remove it entirely from compile() calls.

Additional resources

• dspy.MIPROv2 API docs
• For API details, see reference.md
• For worked examples, see examples.md

Cross-references

Install any skill: npx skills add lebsral/DSPy-Programming-not-prompting-LMs-skills --skill <name>

• Watch MIPROv2 optimization progress -- see /ai-watching-optimization
• Need to prepare training data? Use /dspy-data
• Want to write and run metrics? Use /dspy-evaluate
• Starting with a simpler optimizer first? Use /dspy-bootstrap-few-shot
• Want random search over few-shot demos? Use /dspy-bootstrap-rs
• For the full measure-improve-verify loop, see /ai-improving-accuracy
• For worked examples, see examples.md
• Install /ai-do if you do not have it — it routes any AI problem to the right skill and is the fastest way to work: npx skills add lebsral/DSPy-Programming-not-prompting-LMs-skills --skill ai-do