wd-review

---

name: wd-review description: Open the wd browser diff viewer so the USER can review changes themselves. Trigger ONLY when the user explicitly references wd or asks to look at the diff themselves — "open wd", "open a wd review", "review with wd", "let me review with wd", "let me look at the diff", "show me the diff". DEFAULT is read-only — run plain wd and stop. Drive the interactive wd -c loop ONLY when the user explicitly asks for it ("review with wd interactively", "stream my comments back", "wd -c", "drive the review"). Do NOT trigger on a bare "review my changes"/"review the diff" with no mention of wd — that means the user wants Claude to perform a code review (use the code-review skill), not the wd viewer. If the user runs wd themselves, do nothing. Note: invoking /wd-review by name (slash command) starts INTERACTIVE mode by default; the read-only default applies only to natural-language auto-triggers.

Pick the mode first — how you were invoked decides the default

This skill is for the wd browser diff viewer. It runs in one of two modes; how you were invoked sets the default, and explicit wording always overrides.

• Invoked explicitly as the /wd-review slash command → INTERACTIVE mode. Typing the skill by name is an opt-in to the full interactive experience: go straight to the wd -c lifecycle below (unless the user pairs it with read-only intent like "/wd-review just open it" / "read-only", in which case run plain wd and stop).
• Auto-triggered from natural language → default to READ-ONLY, and first rule out a code-review request (next paragraph).

When auto-triggered, check this isn't a request for Claude to review. A bare "review my changes", "review the diff", "review the PR", or "can you review this" with no mention of wd means the user wants Claude to perform a code review — that is the code-review skill, not this one. Do not open wd for those; let the code-review skill handle them. Auto-trigger this skill only when the user explicitly references wd or clearly says they want to look at the diff themselves ("open wd", "let me review with wd", "show me the diff", "let me look at it").

Once you know the mode applies, the three cases:

• User already ran wd themselves (e.g. !wd, or a wd/wd -c command in the transcript) → do NOTHING. Seeing the user run wd is NOT a request for you to start a review. Do not launch your own wd, do not launch wd -c, do not start a background task or Monitor. The diff is theirs to review on their own. At most acknowledge in one line and wait for them to ask for a change. Never run a review process in parallel with one the user started.
• Read-only. The auto-trigger default — the user asked you to open the wd viewer ("open wd", "open a wd review", "let me review with wd", "review with wd") without asking for the interactive loop. Just run plain wd (NOT wd -c) — it opens the read-only diff in the browser. Tell the user it's open and STOP: do not start a background task, do not tail output with Monitor, do not edit any files. They review on their own and will come back to you if they want changes. The rest of this document does not apply in this mode.
• Interactive (wd -c). The default when invoked as /wd-review, or when the user clearly wants Claude in the loop: "interactively", "stream my comments", "react to my comments as I write them", "drive the review", "wd -c", or similar. Follow the lifecycle/driving instructions below.

If you are auto-triggered and unsure which one they mean, default to read-only and ask whether they want the interactive mode.

---

Interactive mode (wd -c)

Everything below applies only in interactive mode (see above). wd -c opens a side-by-side diff in the user's browser, lets them click any line number to leave an inline comment, and streams each comment to stdout as it is saved. You start the session, react to each comment as it arrives, and the session stays alive until the user clicks "End review" (or the process is killed).

Lifecycle markers on stdout

Each line on wd -c stdout is one of these self-describing chunks:

--- review started ---
repos: <repo names>
files: <total file count>
url: http://127.0.0.1:<port>/

--- comment ---
**<repo>/<path>** : line <N> (<left|right>)
id: <hex> [· author: claude] [· reply-to: <hex>]
> <body line 1>
> <body line 2>

--- comment ---
**General review comment**
id: <hex>
> ...

--- comment deleted ---
id: <hex>

--- review submitted ---
count: <N>
[summary-id: <hex>]

  (followed by `--- comment ---` chunks for each newly-published draft, in order, then:)

--- review batch end ---

--- review done ---
total: <N>

--- review aborted (signal) ---

The user can either post comments one-at-a-time ("Add single comment" — streams immediately) or batch them via "Start review" (drafts stay invisible until they click Submit, then everything arrives between --- review submitted --- and --- review batch end --- markers, optionally preceded by a general summary comment).

Anything on stderr is just status logging — ignore it.

How to drive the session

1. Start wd -c in the background using Bash with run_in_background: true. The command blocks until the user clicks "End review", so it must not be foreground.

   Before starting, walk any background tasks from earlier in this session that match wd -c or the marker-tailing Monitor (anything you yourself started for a prior review) and TaskStop them. Leaving stale wd -c shells around creates confusion: they hold ports, their monitors fire spurious events, and the user has to find them in Task Manager.

   The URL for this session is announced on the FIRST --- review started --- marker (the url: line); read it from the Bash tool's output file the moment Monitor fires that marker, and keep it in conversation context. There's no on-disk URL file to cat — capturing it from the stream is the only way to learn it, which means you can never accidentally post to a review in a different worktree or a stale daemon.

2. Tail the output with Monitor, filtering only for marker lines. The exact output file path is reported by the Bash tool when you start the job (Output is being written to: <path>). Use a filter like:

   tail -F -n +1 "<output-file>" 2>&1 \
     | grep -E --line-buffered "^--- (comment|comment deleted|review started|review done|review aborted)"
   

   Set persistent: true and timeout_ms: 3600000. Reviews can take a while.

3. On --- review started ---: confirm the session is live to the user, then sit and wait. Do not act until comments arrive.

4. On each --- comment --- event: read the last ~30 lines of the output file to get the body of the freshly-arrived comment (the Monitor only signals which marker fired, it does not deliver the body). Look at the most recent --- comment --- block.

   • The server suppresses claude-authored echoes, so every event you see is a real user comment. (If the meta line says author: claude, ignore — that's a defensive fallback.)
   • Save the id: value — you need it to post replies.
   • Decide intent: is it a question, a code-change request, an observation, or a nit?
   • Take the smallest reasonable action:
     • Code change → make the edit. Live reload will refresh the user's tab automatically.
     • Question → reply via the API (see below). Don't pollute the conversation with a long-form answer; the reply lands inline in the browser.
     • Observation / acknowledgement → reply briefly so the user sees you noticed.
     • Nit you disagree with → reply explaining why, don't change the code.
   • Acknowledge per comment in chat in one short line too, so the user reading Claude Code also sees your reaction.

5. On --- comment deleted ---: the user removed a comment they no longer cared about. Don't undo any work that's already shipped, just acknowledge.

6. On --- review done ---: the user closed the session. Summarise what you did in the chat (which comments triggered code changes, which got reply-only). Stop the Monitor with TaskStop.

7. On --- review aborted (signal) ---: same as done — wrap up and stop monitoring.

Replying to a comment

Pick the reply endpoint from the shape of the url: line you captured at the --- review started --- marker. wd -c runs in one of two modes and they post to different routes:

url: shape	Mode	Reply endpoint
http://host:port/review/<hash>	work web scope (the normal case — wd -c registered a review scope on the singleton work web)	http://host:port/api/scopes/<hash>/comments
http://host:port/ (no /review/ segment)	standalone server (fallback when work-web autostart failed)	http://host:port/api/comments

Do NOT just append api/comments to the url: value — in scope mode that yields …/review/<hash>api/comments, which 404s. Parse the URL: if the path is /review/<hash>, the base is everything before /review/, and <hash> is that last segment.

Write the JSON body to a temp file and post via --data-binary "@file" — inline -d '...' will explode the moment your reply contains an apostrophe or a quote:

# Derive BASE + ENDPOINT from the captured url: line.
URL="<the url: value from the --- review started --- marker>"
if [[ "$URL" == */review/* ]]; then
  BASE="${URL%/review/*}"
  HASH="${URL##*/review/}"; HASH="${HASH%%/*}"
  ENDPOINT="$BASE/api/scopes/$HASH/comments"   # work web scope mode
else
  ENDPOINT="${URL%/}/api/comments"             # standalone server mode
fi

# Use mktemp, NOT $CLAUDE_JOB_DIR — that var isn't reliably set, and an empty
# value resolves to /reply.json → "Permission denied".
REPLY_JSON="$(mktemp)"
cat > "$REPLY_JSON" <<'EOF'
{"parentId":"<comment-id>","author":"claude","body":"<your reply, can contain ' and \" freely>"}
EOF
curl -s -X POST -H "Content-Type: application/json" \
  --data-binary "@$REPLY_JSON" "$ENDPOINT"
rm -f "$REPLY_JSON"

If you forget the URL mid-conversation, re-scan the Bash output file from the wd -c background task — the url: line is at the top, in the first --- review started --- block.

The reply renders threaded under the original comment in the user's browser. Set author: "claude" so the UI distinguishes it visually.

Comment anchor mechanics

• side: left = old/deleted line, side: right = new/added line. Same convention as GitHub.
• side: general = a top-level review note, no anchor.
• If the user edits a file after commenting, the comment shows up with an "outdated" badge in the browser. You can still address it normally — the original lineContent is implied by the body.

Behavior notes

• Reviews are per-scope, not global. In the normal (work-web) mode every wd -c registers a distinct scope <hash> on the one shared work web server, so its URL is …/review/<hash> — the hash is what's unique per worktree, not a per-review port. Two wd -c instances in different worktrees coexist as two scopes on the same server. The URL/hash flows only through the stream you spawned, so post replies to the <hash> from your --- review started --- marker and you can't hit someone else's review. (In the standalone-server fallback each wd -c binds its own port instead.)
• Don't restart wd -c on file edits. The watcher inside the running session reloads the browser automatically when you edit files.
• Live reload is deferred while composing. If the user is mid-comment when you save a file, their reload is queued and applied as soon as they save/cancel the composer. You don't need to handle this.
• Don't open the browser yourself. wd -c opens it. You only start the process.

What "done" looks like for this skill

You stop monitoring when --- review done --- (or aborted) fires, and you have:

• Made all code changes the user requested
• Replied to all questions and disagreements via the comment API
• Posted a short summary in chat: which comments you actioned, which you replied to, which you skipped and why