designer-runtime

name	designer-runtime
description	Use this when a designer needs to pilot an ad-hoc iOS simulator directly, launch Flutter from their own worktree in tmux, or trigger hot reload without the broker/device-harness path.

Designer Runtime

Use this skill for designers and QA agents working directly from an assigned worktree and simulator.

Use only these scripts:

designer-drive ...
designer-crop-screenshot ...
designer-flutter-run ...
designer-flutter-stop ...
designer-hot-reload ...

What They Are For

• designer-drive
  • direct ad-hoc simulator inspection and interaction through plain idb commands plus small Python HID helpers for text editing cases
  • screenshot capture stays on the same designer-drive screenshot surface, falls back to simulator-native capture if idb bitmap capture is unavailable, normalizes the saved image to the live UI orientation, and can crop directly to a live accessibility selector
  • when the app exports automation.orientationBeacon, tap, swipe, and screenshot orientation use that accessibility sentinel instead of probe-based orientation guessing
• designer-flutter-run
  • launches flutter run -d <UDID> in a tmux session from the designer worktree
  • mirrors Flutter output to a log file so immediate tmux exits are diagnosable
• designer-hot-reload
  • sends r to the tmux session running Flutter
• designer-flutter-stop
  • stops a tmux session started by designer-flutter-run
• designer-crop-screenshot
  • crops screenshots for pixel-level review using exact boxes, percentage+anchor crops, named presets, or live hierarchy selectors

Guardrails

• This skill is for direct designer/QA piloting, not QA broker flows.
• Do not use flutter-sim or the managed reservation path here.
• designer-drive must not rely on broker reservations, thread identity, mutagen lane setup, or managed runtime metadata.
• Work from the assigned designer worktree and keep controller/state logic intact unless the task explicitly says otherwise.
• Designers should focus on widget/interface work and avoid Rust changes unless explicitly reassigned.
• Use one simulator per active design loop and wait for each command to finish before issuing the next one.
• Run commands plainly and sequentially.
• Do not combine designer runtime commands with shell operators or wrappers.
• Do not use compound commands with &&, ||, ;, pipes, command substitution, or inline env wrappers when operating this tooling.
• When reviewing a small UI region, prefer designer-drive screenshot --selector ... if a live accessibility frame is enough.
• Use designer-crop-screenshot when you need manual boxes, presets, percentages, or to crop an existing saved image.

Typical Flow

1. Launch the app from the designer worktree:
   • designer-flutter-run --session designer-app --device-id <UDID> --workdir <worktree_path>
   • If the tmux session exits immediately, inspect the printed log file path.
2. Inspect or interact with the running app:
   • designer-drive hierarchy --device-id <UDID>
   • designer-drive command tapOn --device-id <UDID> --input '{"text":"Settings"}'
   • designer-drive screenshot --device-id <UDID> --selector '{"id":"node-style-minimal-flat"}' --out minimal-flat.png
   • designer-crop-screenshot --input current.png --preset bottom_safe_area --out current-bottomsafe.png
3. After code changes, hot reload:
   • designer-hot-reload --session designer-app
4. If the assigned simulator is showing another stale app/session, stop that session and relaunch/focus the app:
   • designer-flutter-stop --session designer-app
   • designer-drive command launchApp --device-id <UDID>
5. If the assigned simulator has stale app-local data, such as a native SQLite migration mismatch, reset only that app on that simulator:
   • designer-flutter-stop --session designer-app
   • designer-drive command resetApp --device-id <UDID>
   • designer-flutter-run --session designer-app --device-id <UDID> --workdir <worktree_path> -- <dart defines>

designer-drive

Usage shape:

designer-drive [global-options] <subcommand> [subcommand-options]

Important:

• Global flags must come before the subcommand.
• In practice, that means --app-id and --json go before apps, hierarchy, command, flow, and so on.
• Use a single command at a time. Wait for it to complete, inspect the result, then run the next command.
• For screenshot selector cropping, pass selector JSON such as --selector '{"id":"node-style-minimal-flat"}'.
• Fresh screenshots from designer-drive screenshot are normalized to the live UI orientation before they are saved or cropped.
• Flutter apps can expose a hidden accessibility sentinel with id automation.orientationBeacon and value <orientation>|<width>|<height>, for example landscapeLeft|1366|1024.
• Supported sentinel orientations are portraitUp, portraitDown, landscapeLeft, and landscapeRight.

Commands:

designer-drive devices
designer-drive apps --device-id <UDID>
designer-drive hierarchy --device-id <UDID>
designer-drive screenshot --device-id <UDID> --out current.png
designer-drive screenshot --device-id <UDID> --selector '{"id":"node-style-minimal-flat"}' --out minimal-flat.png
designer-drive command <name> --device-id <UDID> [--input <json>] [--label <text>] [--out <file>]
designer-drive flow --device-id <UDID> --input <json-array> [--label <text>]

Use devices to list booted simulators visible to idb. All other commands target the UDID you were given. designer-drive uses the current working directory internally; designers should not need to pass a worktree path just to pilot a device.

Common examples:

designer-drive devices
designer-drive hierarchy --device-id <UDID>
designer-drive command tapOn --device-id <UDID> --input '{"text":"Continue"}'
designer-drive screenshot --device-id <UDID> --selector '{"text":"Close"}' --out close-button.png
designer-drive command clearAndInputText --device-id <UDID> --input 'New title'
designer-drive command takeScreenshot --device-id <UDID> --out current.png
designer-hot-reload --session designer-app

Useful command names:

• launchApp
• terminateApp
• resetApp
• tapOn
• longPressOn
• inputText
• clearAndInputText
• eraseText
• forwardEraseText
• hideKeyboard
• swipe
• takeScreenshot

Recommended operating pattern:

1. Start the app with designer-flutter-run.
2. Run designer-drive devices and confirm the target UDID.
3. Use designer-drive hierarchy --device-id <UDID> to inspect the current screen.
4. Run one interaction command.
5. Re-run hierarchy or takeScreenshot to verify the result.
6. If you want a one-step cropped screenshot, use designer-drive screenshot --selector ....
7. If you need a manual or preset crop flow, use designer-crop-screenshot.
8. After code edits, run designer-hot-reload --session <session>.

designer-flutter-run

Usage shape:

designer-flutter-run --session <tmux-session> --device-id <UDID> [--workdir <path>] [--target <dart-file>] [--flavor <flavor>] [--log <path>] [-- <flutter args>...]

Examples:

designer-flutter-run --session designer-app --device-id <UDID> --workdir <worktree_path>
designer-flutter-run --session designer-app --device-id <UDID> --workdir <worktree_path> --log /tmp/designer-app.log
designer-flutter-run --session designer-app --device-id <UDID> --workdir <worktree_path> -- --dart-define=FOO=bar

Notes:

• --help prints the supported flags.
• The default log is /tmp/designer-flutter-run/<session>.log.
• The script prints the log path after launch.
• designer-flutter-run is the sanctioned path for Flutter debug launching; raw flutter run remains blocked by the Flutter shim.
• If tmux list-sessions no longer shows the session, inspect the log before retrying.
• Do not replace this with raw flutter run unless the operator explicitly asks for a one-off diagnostic path.

designer-crop-screenshot

Use this when you need a stable screenshot region for bottom safe-area checks, header blur comparisons, or before/after diffs. If a single live selector crop is enough, prefer designer-drive screenshot --selector ... first. Selector mode uses selector JSON, for example --selector '{"text":"Close"}'.

Usage shape:

designer-crop-screenshot --input <image.png> --out <crop.png> [crop-mode-options]

Selector mode from live hierarchy:

designer-crop-screenshot --input shot.png --device-id <UDID> --selector '{"id":"node-style-minimal-flat"}' --out minimal-flat.png
designer-crop-screenshot --input shot.png --device-id <UDID> --selector '{"text":"Close"}' --out close-button.png

Exact pixel box:

designer-crop-screenshot --input shot.png --x 0 --y 2400 --width 2048 --height 332 --out bottom-strip.png

Percentage + anchor:

designer-crop-screenshot --input shot.png --anchor bottom_center --width-pct 100 --height-pct 12 --out bottom-safe.png
designer-crop-screenshot --input shot.png --anchor top_right --width-pct 25 --height-pct 20 --offset-x -24 --out top-right.png

Preset mode:

designer-crop-screenshot --input shot.png --preset header --out header.png
designer-crop-screenshot --input shot.png --preset bottom_right --out bottom-right.png
designer-crop-screenshot --input shot.png --preset bottom_safe_area --out bottom-safe.png

Supported anchors:

• top_left
• top_center
• top_right
• center_left
• center
• center_right
• bottom_left
• bottom_center
• bottom_right

Supported presets:

• bottom_right
• header
• center
• top_right
• bottom_safe_area

Notes:

• Use exact pixel mode when you need repeatable box-for-box comparisons.
• Use selector mode when you want the crop region to come directly from the live accessibility frame in designer-drive hierarchy.
• Selector-mode crops automatically scale hierarchy coordinates into screenshot pixel coordinates.
• Use percentage + anchor mode when the same region should adapt across screen sizes.
• Presets are shortcuts and can be used for quick review loops.
• Prefer one-step selector crops from designer-drive screenshot --selector ... when that covers the review.
• Use designer-crop-screenshot when you need a second explicit crop step.