project-initialization

name	project-initialization
description	Use when COMMANDS.md is uninitialized, contains <fill>, or the repository lacks verified canonical build, lint, test, and verify commands.
metadata	{"short-description":"Initialize canonical verify commands"}

Purpose

Initialize a copied repository so agents can run canonical verification commands without guessing.

This skill standardizes Makefile targets as the command wrapper and makes make verify the completion gate.

When to use

Use this skill when:

• COMMANDS.md still contains <fill> in the initialization verification line.
• The project has just been copied from this template.
• Canonical build/lint/analysis/test commands are not yet wired.

If project evidence points to embedded, edge, target-local, daemon, logger, recorder, collector, sampler, sensor, robot, battery, flash, wakeup, or thermal constraints, recommend embedded-project-constitution after the command system is initialized. Do not block command initialization on that constitution work.

Workflow

1. Check COMMANDS.md for <fill>.
   • If <fill> exists, initialization is required.
2. Infer likely tooling from repository evidence (lockfiles, CI config, package manager, compose files, scripts).
3. Ask at most 5 focused questions for missing decisions.
4. Update Makefile wrapper targets and COMMANDS.md command entries.
   • Keep verified by agent: <fill> unchanged at this step.
5. Run make verify.
6. Gate behavior:
   • Success (exit 0): replace verified by agent: <fill> with yes (YYYY-MM-DD).
   • Failure (non-zero): keep <fill> and document failure reason + exact next steps to retry (in INIT_REPORT.md or appended notes in COMMANDS.md).
7. If embedded/edge physical constraints were detected, hand off to embedded-project-constitution for repo-level physical budgets, target profiles, and resource harness skeletons.

Sudo / install policy

• Do not run privileged installs directly.
• If setup requires sudo/system packages, generate a reviewable script (for example tools/bootstrap/install.sh) and ask the user to run it.
• Avoid curl | bash patterns.

Gotchas

• Common pitfall: setting verified by agent to yes without running make verify.
  Instead: update to dated yes only when verify succeeds (exit 0).
• Common pitfall: treating initialization as complete while <fill> remains.
  Instead: do not declare completion until rg "<fill>" COMMANDS.md returns 0 matches.
• Common pitfall: filling commands by guesswork and diverging from the actual project.
  Instead: check lockfile/CI/package manager/scripts evidence first and ask only what is missing.
• Common pitfall: ending work without next steps after verify failure.
  Instead: record specific failure reason and rerun steps in INIT_REPORT.md or COMMANDS.md.

Completion criteria

Initialization is complete only when both are true:

1. COMMANDS.md contains no <fill>.
2. make verify has been executed successfully (exit code 0) by the agent.

If make verify fails, initialization is not complete and <fill> must remain.

Verify

• Run make help (should show wrapper targets and initialization status guidance).
• Run make verify.
• If successful, update verification line in COMMANDS.md and re-check rg "<fill>" COMMANDS.md returns no matches.
• If unsuccessful, preserve <fill> and leave actionable remediation notes.