setup

name	setup
description	Reconfigure an existing Plan-Build-Run project (models, features, CLAUDE.md).
allowed-tools	Read, Write, Bash, Glob, AskUserQuestion
argument-hint	[--models] [--features] [--hooks]

STOP — DO NOT READ THIS FILE. You are already reading it. This prompt was injected into your context by Claude Code's plugin system. Using the Read tool on this SKILL.md file wastes tokens. Begin executing Step 1 immediately.

Step 0 — Immediate Output

Before ANY tool calls, display this banner:

╔══════════════════════════════════════════════════════════════╗
║  PLAN-BUILD-RUN ► RECONFIGURE                                ║
╚══════════════════════════════════════════════════════════════╝

Then proceed to Step 1.

/pbr:setup — Plan-Build-Run Reconfigure

You are running the setup skill in reconfigure mode. This wizard lets existing Plan-Build-Run projects change model profiles, workflow features, and CLAUDE.md integration. It does NOT re-initialize or overwrite project state.

---

Step 1: Detect Project State

Check if .planning/config.json exists.

If .planning/config.json does NOT exist: Display:

No Plan-Build-Run project found in this directory.

/pbr:setup is for reconfiguring existing projects.
To start a new project, run: /pbr:new-project

/pbr:new-project includes everything /pbr:setup used to do, plus deep requirements gathering and roadmap creation.

Stop. Do not proceed further.

If .planning/config.json exists:

• Read .planning/config.json
• Display the current settings summary:

  Current configuration:
  - Model profile: {derived from models block — balanced/quality/budget or custom}
  - Depth: {depth}
  - Mode: {mode}
  - Auto-continue: {features.auto_continue}
  - TDD mode: {features.tdd_mode}
  - Git branching: {git.branching}
  

• Proceed to Step 2.

---

Step 2: Model Selection

Note: These profiles control agent models, not the orchestrator. The orchestrator uses your Claude Code session model. For cost optimization, consider running your session on Sonnet -- agents with inherit will follow. See references/model-profiles.md for details.

Use AskUserQuestion: question: "Which model profile should agents use?" header: "Models" options: - label: "Balanced (Recommended)" description: "Sonnet for most agents, Haiku for synthesizer. Good quality/cost tradeoff." - label: "Quality" description: "Opus for executor and planner, Sonnet for others. Best results, highest cost." - label: "Budget" description: "Haiku for most agents. Fastest and cheapest, but lower quality." - label: "Keep current" description: "Leave model settings unchanged."

Apply the selected profile to the models block in config.json:

• Balanced: executor=sonnet, researcher=sonnet, planner=sonnet, verifier=sonnet, synthesizer=haiku, context_window_tokens=200000, agent_checkpoint_pct=50, extended_context=false
• Quality: executor=opus, researcher=sonnet, planner=opus, verifier=sonnet, synthesizer=sonnet, context_window_tokens=1000000, agent_checkpoint_pct=65, extended_context=true
• Budget: executor=haiku, researcher=haiku, planner=sonnet, verifier=haiku, synthesizer=haiku, context_window_tokens=200000, agent_checkpoint_pct=50, extended_context=false
• Keep current: no change to models block, no change to context_window_tokens

---

Step 3: Workflow Features

Use AskUserQuestion: question: "Which workflow features do you want enabled?" header: "Features" multiSelect: true options: - label: "Auto-continue" description: "Automatically chain commands (build → review → next phase) without prompting" - label: "TDD mode" description: "Write tests before implementation in executor agents" - label: "Strict gates" description: "Require verification AND review to pass before advancing phases" - label: "Git branching" description: "Create a branch per phase for cleaner PR history"

Apply selections (others unchanged):

• Auto-continue: Set features.auto_continue: true
• TDD mode: Set features.tdd_mode: true
• Strict gates: Set gates.verification: true, gates.review: true, gates.plan_approval: true
• Git branching: Set git.branching: "phase"

---

Step 4: CLAUDE.md Integration

Check if a CLAUDE.md file exists in the project root.

If it exists: Read it. If it does NOT already contain a "Plan-Build-Run" section, offer to append the integration block. If it does NOT exist: Offer to create CLAUDE.md with the integration block.

Use AskUserQuestion: question: "Update CLAUDE.md with Plan-Build-Run integration notes?" header: "CLAUDE.md" options: - label: "Yes" description: "Add or update the Plan-Build-Run section in CLAUDE.md" - label: "No" description: "Skip — leave CLAUDE.md as-is"

If "Yes", append/create:

## Plan-Build-Run

This project uses [Plan-Build-Run](https://github.com/SienkLogic/plan-build-run) for structured development.

- Project state: `.planning/STATE.md` (source of truth for current phase and progress)
- Configuration: `.planning/config.json`
- Run `/pbr:progress` to see current project state and suggested next action.

**After compaction or context recovery**: Read `.planning/STATE.md` (especially the `## Session Continuity` section) before proceeding with any work. The PreCompact hook writes recovery state there automatically.

---

Step 5: Platform Settings

Manage Claude Code platform settings that PBR recommends for optimal token usage.

Read .planning/config.json (already loaded in Step 1). Check for a platform_settings block:

• If absent, treat it as {} (no managed settings).

Check for existing .claude/settings.json:

• If it exists, read its contents. Parse as JSON (or {} if empty/missing).
• If it does not exist, start from {}.

Compute the merge:

• Start with the existing .claude/settings.json content.
• Apply each key from platform_settings in config.json on top.
• If platform_settings is absent or empty, skip the write entirely.

Report drift (compare before/after):

• List keys being ADDED (were absent in .claude/settings.json)
• List keys being CHANGED (differ from existing .claude/settings.json value)
• List keys that MATCH (already correct — no change needed)

Display the report:

Platform Settings:
  Keys added:   includeGitInstructions → false
  Keys matched: (none)
  Keys changed: (none)

Writing .claude/settings.json...

If all keys already match, display:

Platform Settings: .claude/settings.json is already in sync — no changes needed.

Conflict detection: If an existing .claude/settings.json has a key from platform_settings set to the OPPOSITE value (e.g., "includeGitInstructions": true when PBR wants false), display a WARNING before overwriting:

WARNING: .claude/settings.json has includeGitInstructions: true
         PBR recommends false (removes redundant built-in git instructions).
         Overwriting with PBR recommended value.

Write the merged settings.json:

• Write to .claude/settings.json in the project root (alongside .planning/).
• Ensure the directory .claude/ exists (create it if needed with Bash mkdir -p .claude).
• Write with 2-space indentation. Include a $schema key at the top:

  {
    "$schema": "https://json.schemastore.org/claude-code-settings.json",
    "includeGitInstructions": false
  }
  

  (Merge in any pre-existing keys from .claude/settings.json that are NOT managed by PBR — pass them through unchanged at the bottom of the object.)

Drift detection note: On subsequent /pbr:setup runs, if .claude/settings.json has drifted from platform_settings (e.g., user manually changed it), this step will detect and re-apply the PBR values with a drift warning. This is by design — platform_settings in config.json is the source of truth.

---

Step 6: Write Updated Config

CRITICAL: Write .planning/config.json NOW with all changes from Steps 2-3. Do NOT skip this step.

Write the updated config.json to disk with all applied changes.

Commit Changes

Reference: skills/shared/commit-planning-docs.md for the commit pattern.

If planning.commit_docs is true in config.json, commit modified files:

docs(setup): reconfigure project — {changed_settings}

---

Step 7: Verification

Run a quick check:

1. Verify .planning/config.json is valid JSON (read it back)
2. Display updated settings summary

Display:

╔══════════════════════════════════════════════════════════════╗
║  PLAN-BUILD-RUN ► RECONFIGURE COMPLETE ✓                     ║
╚══════════════════════════════════════════════════════════════╝

Updated:
- Model profile: {new profile}
- Features changed: {list or "none"}
- CLAUDE.md: {updated/skipped}
- Platform settings: {".claude/settings.json updated" or "already in sync" or "no managed settings"}

Run /pbr:progress to see current project state.

---

Error Handling

• If config.json parse fails: Display the raw content and ask user to fix it manually, then retry
• If config.json write fails: Display the JSON content and ask user to save it manually