Execute qualquer Skill no Manus
com um clique

Execute qualquer Skill no Manus com um clique

whisperx

Estrelas2

Forks0

Atualizado18 de fevereiro de 2026 às 15:17

Speech-to-text with word-level timestamps, speaker diarization, and forced alignment using WhisperX. Built on faster-whisper with batched inference for 70x realtime speed.

Instalação

Instalar com Codex ou Claude Copie este prompt, cole no Codex, Claude ou outro assistente e deixe que ele revise a página da skill e instale para você.

Executar no Manus

Fonte

ThePlasmak

ThePlasmak/whisperx

Abrir repositório GitHub Ver repositórios do creator

Download

Executar no Manus

Ocupações relacionadasSOC

Baseado na classificação ocupacional SOC

Cientistas de dadosInformática e Matemática·SOC 15-2051

SKILL.md

readonly

Execute qualquer Skill com um clique

name	whisperx
description	Speech-to-text with word-level timestamps, speaker diarization, and forced alignment using WhisperX. Built on faster-whisper with batched inference for 70x realtime speed.
version	1.0.0
author	Sarah Mak
tags	["audio","transcription","whisperx","speech-to-text","diarization","alignment","subtitles","ml","cuda","gpu"]
homepage	https://github.com/ThePlasmak/whisperx
platforms	["linux","macos","wsl2"]
metadata	{"openclaw":{"emoji":"🎙️","requires":{"bins":["ffmpeg","python3"]}}}

WhisperX

Speech-to-text with word-level timestamps, speaker diarization, and forced alignment — built on faster-whisper with batched inference for up to 70x realtime transcription speed.

WhisperX extends Whisper with three key capabilities that faster-whisper alone doesn't provide:

Forced alignment — precise word-level timestamps via phoneme ASR models (wav2vec2)
Speaker diarization — label who said what (via pyannote.audio)
Batched inference — process audio in parallel chunks for massive speedup

When to Use

Use this skill when you need to:

Transcribe with word-level timing — subtitles, captions, karaoke-style highlighting
Identify speakers — meetings, interviews, podcasts, multi-speaker recordings
Generate subtitle files — SRT, VTT with accurate word timestamps
Translate speech to English — from any supported language
Batch transcribe — efficient processing of multiple files
Transcribe a section — extract just part of a long recording

Trigger phrases: "transcribe with speakers", "who said what", "diarize", "make subtitles", "word timestamps", "speaker identification", "meeting transcript", "karaoke subtitles"

When NOT to use:

Simple transcription without speaker/timing needs → use faster-whisper (lighter, faster)
Real-time/streaming transcription
Files <10 seconds where setup overhead isn't worth it

WhisperX vs faster-whisper:

Feature	faster-whisper	WhisperX
Basic transcription	✅	✅
Word timestamps	✅ (approximate)	✅ (precise, aligned)
Speaker diarization	❌	✅
Forced alignment	❌	✅
Batched inference	❌	✅
Word-level subtitles	❌	✅ (karaoke-style)
Subtitle generation	Manual	Built-in (SRT/VTT/TSV)
Time range trimming	❌	✅ (--start/--end)
Hotwords	❌	✅ (boost specific terms)
Initial prompt	❌	✅ (domain terms)
Speaker renaming	❌	✅ (--speaker-names)
Stdin pipe	❌	✅ (read from `-`)
Setup complexity	Simple	Requires HF token for diarization

Quick Reference

All commands use ./scripts/transcribe (the skill wrapper), not the whisperx CLI directly. The wrapper applies a required PyTorch compatibility patch — see "PyTorch 2.6+ Compatibility" below.

Task	Command	Notes
Basic transcription	`./scripts/transcribe audio.mp3`	Word-aligned by default
With speakers	`./scripts/transcribe audio.mp3 --diarize`	Auto-reads `~/.cache/huggingface/token`
Clean speaker output	`./scripts/transcribe audio.mp3 --diarize --merge-speakers`	Merges consecutive same-speaker segments
Named speakers	`./scripts/transcribe audio.mp3 --diarize --speaker-names "Alice,Bob"`	Replaces SPEAKER_00, SPEAKER_01
SRT subtitles	`./scripts/transcribe audio.mp3 --srt -o subs.srt`	Ready for video players
Word-level SRT	`./scripts/transcribe audio.mp3 --srt --word-level`	Karaoke-style, one word per cue
Wrapped subtitles	`./scripts/transcribe audio.mp3 --srt --max-line-width 42`	Standard TV subtitle width
VTT subtitles	`./scripts/transcribe audio.mp3 --vtt -o subs.vtt`	Web-compatible with `<v>` speaker tags
JSON output	`./scripts/transcribe audio.mp3 --json`	Full data with word timestamps
TSV output	`./scripts/transcribe audio.mp3 --tsv`	Spreadsheet-friendly
Translate to English	`./scripts/transcribe audio.mp3 --translate`	Any language → English
Fast, no alignment	`./scripts/transcribe audio.mp3 --no-align`	Skip forced alignment
Specific language	`./scripts/transcribe audio.mp3 -l en`	Faster than auto-detect
Partial transcription	`./scripts/transcribe audio.mp3 --start 1:30 --end 5:00`	Only a section
Boost terms	`./scripts/transcribe audio.mp3 --hotwords "Kubernetes gRPC"`	Improve rare term recognition
Domain accuracy	`./scripts/transcribe audio.mp3 --initial-prompt "OpenAI, GPT-4"`	Condition the model
From stdin	`cat audio.mp3 \| ./scripts/transcribe -`	Pipe from other tools
Auto-detect format	`./scripts/transcribe audio.mp3 -o out.srt`	Format from extension

⚠️ Do NOT run whisperx CLI directly — it will crash on PyTorch 2.6+ with pyannote models. Always use this skill's ./scripts/transcribe wrapper.

Model Selection

Model	Size	Speed	Accuracy	Use Case
`tiny`	39M	Fastest	Basic	Quick drafts, testing
`base`	74M	Very fast	Good	General use
`small`	244M	Fast	Better	Default for whisperx CLI
`medium`	769M	Moderate	High	Quality transcription
`large-v2`	1.5GB	Slower	Excellent	Best diarization compat
`large-v3`	1.5GB	Slower	Best	Maximum accuracy
`large-v3-turbo`	809M	Fast	Excellent	Recommended (default)

Note: WhisperX defaults to small but this skill defaults to large-v3-turbo for the best speed/accuracy balance with GPU.

Setup

First-Time Setup

Prerequisites: Python 3.10+, ffmpeg, NVIDIA GPU with CUDA (strongly recommended)

Step 1: Install whisperx

# Option A: Run the setup script (auto-detects GPU, creates venv if needed)
./setup.sh

# Option B: Install globally (if you prefer)
pip install whisperx

Step 2 (optional, for diarization): Set up Hugging Face token

Speaker diarization requires a free Hugging Face account and access to gated models. Skip this if you only need transcription/alignment.

Create account at huggingface.co (if you don't have one)
Go to huggingface.co/settings/tokens and create a read access token
Accept the model agreement(s) (click "Agree and access repository"):
- whisperx ≥3.8.0 (recommended): Accept pyannote/speaker-diarization-community-1 — uses pyannote v4 with better accuracy
- whisperx <3.8.0: Accept both pyannote/speaker-diarization-3.1 and pyannote/segmentation-3.0

Save the token so the script auto-detects it:

mkdir -p ~/.cache/huggingface && echo -n "hf_YOUR_TOKEN" > ~/.cache/huggingface/token && chmod 600 ~/.cache/huggingface/token

Alternatively: set HF_TOKEN env var, or pass --hf-token per-command.

Note: The token and model access are completely free. The models are just gated behind a click-to-agree license. Without step 3, you'll get a 403 error even with a valid token.

Subsequent Runs

No setup needed — just run ./scripts/transcribe. The wrapper script:

Auto-detects GPU/CPU and picks optimal compute type
Auto-reads the HF token from ~/.cache/huggingface/token for diarization
Applies the PyTorch 2.6+ compatibility patch automatically (see below)
First run for a new model downloads it to ~/.cache/huggingface/ (one-time per model)

Checking If It's Working

# Quick test — should print transcript to stdout
./scripts/transcribe some_audio.mp3

# Test diarization — should show [SPEAKER_00], [SPEAKER_01], etc.
./scripts/transcribe some_audio.mp3 --diarize

# Check version
./scripts/transcribe --version

# If diarization fails with 403: model agreements not accepted (see step 3 above)
# If it crashes with pickle/weights_only error: you're running `whisperx` CLI directly instead of the wrapper

Platform Support

Platform	Acceleration	Speed
Linux + NVIDIA GPU	CUDA (batched)	~70x realtime 🚀
WSL2 + NVIDIA GPU	CUDA (batched)	~70x realtime 🚀
macOS Apple Silicon	CPU	~3-5x realtime
macOS Intel	CPU	~1-2x realtime
Linux (no GPU)	CPU	~1x realtime

Usage

All commands use ./scripts/transcribe — resolve the path relative to this skill's directory.

# Basic transcription (word-aligned)
./scripts/transcribe audio.mp3

# With speaker diarization (auto-reads ~/.cache/huggingface/token)
./scripts/transcribe audio.mp3 --diarize

# Diarize with merged same-speaker segments (cleaner output)
./scripts/transcribe audio.mp3 --diarize --merge-speakers

# Rename speakers to real names
./scripts/transcribe audio.mp3 --diarize --speaker-names "Alice,Bob,Charlie"

# Generate SRT subtitles
./scripts/transcribe audio.mp3 --srt -o subtitles.srt

# SRT with line wrapping (standard TV width)
./scripts/transcribe audio.mp3 --srt --max-line-width 42 -o subtitles.srt

# Word-level karaoke subtitles (one word per cue with precise timing)
./scripts/transcribe audio.mp3 --srt --word-level -o karaoke.srt

# VTT with speaker voice tags (<v Speaker>text</v>)
./scripts/transcribe audio.mp3 --vtt --diarize -o subtitles.vtt

# Auto-detect format from output filename
./scripts/transcribe audio.mp3 -o transcript.json
./scripts/transcribe audio.mp3 -o subtitles.vtt

# TSV for spreadsheets/data analysis
./scripts/transcribe audio.mp3 --tsv -o transcript.tsv

# Transcribe only a section (useful for long recordings)
./scripts/transcribe podcast.mp3 --start 10:30 --end 15:00

# Boost recognition of specific terms (hotwords)
./scripts/transcribe meeting.mp3 --hotwords "Kubernetes gRPC OAuth2"

# Improve accuracy for domain context (initial prompt)
./scripts/transcribe meeting.mp3 --initial-prompt "Attendees: Alice, Bob. Topics: Kubernetes, gRPC, OAuth2"

# Maximum accuracy
./scripts/transcribe audio.mp3 --model large-v3

# Translate non-English audio to English
./scripts/transcribe audio.mp3 --translate -l ja

# Fast mode (skip alignment)
./scripts/transcribe audio.mp3 --no-align

# JSON with full metadata and word timestamps
./scripts/transcribe audio.mp3 --json -o transcript.json

# Specify known speaker count for better diarization
./scripts/transcribe audio.mp3 --diarize --min-speakers 2 --max-speakers 4

# Read audio from stdin (pipe from other tools)
cat audio.mp3 | ./scripts/transcribe -
ffmpeg -i video.mp4 -f wav - | ./scripts/transcribe - --diarize

Options

AUDIO_FILE               Path to audio/video file, or '-' to read from stdin

Model options:
  -m, --model NAME       Whisper model (default: large-v3-turbo)
  --batch-size N         Batch size for inference (default: 8, lower if OOM)
  --beam-size N          Beam search size (higher = slower but more accurate)
  --initial-prompt TEXT   Condition the model with domain terms, names, acronyms
  --hotwords TEXT         Space-separated hotwords to boost recognition of rare terms

Device options:
  --device               cpu, cuda, or auto (default: auto)
  --compute-type         int8, float16, float32, or auto (default: auto)
  --threads N            CPU threads for CTranslate2 inference (default: 4)

Language options:
  -l, --language CODE    Language code (auto-detects if omitted)
  --translate            Translate to English

Time range:
  --start TIME           Start time — seconds (90), MM:SS (1:30), HH:MM:SS
  --end TIME             End time — same formats as --start

Alignment options:
  --no-align             Skip forced alignment (no word timestamps)
  --align-model MODEL    Custom phoneme ASR model for alignment

Speaker diarization:
  --diarize              Enable speaker labels
  --hf-token TOKEN       Hugging Face access token (also reads ~/.cache/huggingface/token or HF_TOKEN env)
  --min-speakers N       Minimum speaker count hint
  --max-speakers N       Maximum speaker count hint
  --merge-speakers       Merge consecutive segments from same speaker (cleaner output)
  --speaker-names NAMES  Comma-separated names to replace SPEAKER_00, SPEAKER_01, etc.

Output options:
  -j, --json             JSON output with segments and word timestamps
  --srt                  SRT subtitle format
  --vtt                  WebVTT subtitle format (uses <v> voice tags for speakers)
  --tsv                  TSV (tab-separated values) for data analysis
  --word-level           Word-level subtitles (SRT/VTT only) — karaoke-style
  --max-line-width N     Maximum characters per subtitle line (wraps at word boundaries)
  --output-format FMT    Explicit format (srt, vtt, txt, json, tsv)
  -o, --output FILE      Save to file (format auto-detected from extension)

Miscellaneous:
  -V, --version          Show version
  -q, --quiet            Suppress progress messages

Output Formats

Plain Text (default)

Hello and welcome to the show.
Today we're talking about AI transcription.

Plain Text with Diarization (`--diarize`)

[SPEAKER_00] Hello and welcome to the show.
[SPEAKER_01] Thanks for having me.

Plain Text with Named Speakers (`--diarize --speaker-names "Alice,Bob"`)

[Alice] Hello and welcome to the show.
[Bob] Thanks for having me.

SRT (`--srt`)

Standard subtitle format, compatible with VLC, YouTube, etc.

1
00:00:00,000 --> 00:00:03,500
Hello and welcome to the show.

2
00:00:03,500 --> 00:00:06,200
Today we're talking about AI transcription.

Word-Level SRT (`--srt --word-level`)

One word per cue — for karaoke-style highlighting or precise editing.

1
00:00:00,000 --> 00:00:00,320
Hello

2
00:00:00,320 --> 00:00:00,560
and

3
00:00:00,560 --> 00:00:01,100
welcome

WebVTT (`--vtt`)

Web-native subtitle format for HTML5 <video> and <track>. When used with --diarize, uses proper VTT <v> voice tags for speaker identification.

WEBVTT

00:00:00.000 --> 00:00:03.500
<v Alice>Hello and welcome to the show.</v>

00:00:03.500 --> 00:00:05.000
<v Bob>Thanks for having me.</v>

JSON (`--json`)

Structured output with word-level timestamps and confidence scores.

{
  "segments": [
    {
      "start": 0.0,
      "end": 3.5,
      "text": "Hello and welcome to the show.",
      "speaker": "SPEAKER_00",
      "words": [
        {"word": "Hello", "start": 0.0, "end": 0.32, "confidence": 0.98},
        {"word": "and", "start": 0.32, "end": 0.56, "confidence": 0.95}
      ]
    }
  ]
}

TSV (`--tsv`)

Tab-separated values for spreadsheets and data pipelines.

start	end	text
0.000	3.500	Hello and welcome to the show.
3.500	6.200	Today we're talking about AI transcription.

Examples

# Transcribe a meeting recording with speakers (clean output)
./scripts/transcribe meeting.mp3 --diarize --merge-speakers \
  --speaker-names "Alice,Bob,Charlie" \
  --min-speakers 3 --max-speakers 5 --json -o meeting.json

# Generate subtitles for a video (wrapped to standard width)
./scripts/transcribe video.mp4 --srt --max-line-width 42 -o video.srt

# Karaoke-style word-level subtitles
./scripts/transcribe song.mp3 --vtt --word-level -o karaoke.vtt

# Transcribe just the interesting part of a podcast
./scripts/transcribe podcast.mp3 --start 45:00 --end 1:02:30 --diarize --merge-speakers

# Improve accuracy for technical content (hotwords + initial prompt)
./scripts/transcribe lecture.mp3 \
  --hotwords "PyTorch CTranslate2 whisperx" \
  --initial-prompt "A lecture on ML model optimization"

# Batch transcribe a folder
for file in recordings/*.mp3; do
  ./scripts/transcribe "$file" --json -o "${file%.mp3}.json"
done

# Transcribe YouTube audio (with yt-dlp)
yt-dlp -x --audio-format mp3 <URL> -o audio.mp3
./scripts/transcribe audio.mp3 --diarize --merge-speakers

# Pipe directly from ffmpeg (extract audio on the fly)
ffmpeg -i video.mp4 -f wav -ac 1 -ar 16000 - 2>/dev/null | ./scripts/transcribe -

# Quick draft (fast, no alignment)
./scripts/transcribe audio.mp3 --model base --no-align

# German audio with TSV output for analysis
./scripts/transcribe audio.mp3 -l de --tsv -o transcript.tsv

# Auto-detect format from filename
./scripts/transcribe audio.mp3 -o transcript.srt   # → SRT
./scripts/transcribe audio.mp3 -o data.json         # → JSON
./scripts/transcribe audio.mp3 -o export.tsv        # → TSV

Common Mistakes

Mistake	Problem	Solution
Using CPU when GPU available	10-70x slower	Check `nvidia-smi`; verify CUDA
Missing HF token for diarize	Diarization fails	Get token from huggingface.co/settings/tokens
Not accepting model agreements	403 error on diarization model	whisperx ≥3.8.0: accept community-1. Earlier: accept both pyannote/speaker-diarization-3.1 AND segmentation-3.0 (see Setup)
Running `whisperx` CLI directly	Crashes on PyTorch 2.6+	Always use `./scripts/transcribe` wrapper (applies torch.load patch)
batch_size too high	CUDA OOM	Lower `--batch-size` (try 4 or 2)
Using large-v3 when turbo works	Unnecessary slowdown	`large-v3-turbo` is faster with near-identical accuracy
Forgetting --language	Wastes time auto-detecting	Specify `-l en` when you know the language
Using WhisperX for simple transcription	Heavier setup for no benefit	Use faster-whisper for basic transcription
--word-level without --srt/--vtt	Flag is ignored	Word-level only applies to subtitle formats
--merge-speakers without --diarize	Flag is ignored	Merge only works when speakers are identified

Performance Notes

First run: Downloads model + alignment model (one-time)
GPU batched inference: Up to 70x realtime with large-v2
Diarization: Adds ~30-60s overhead for model loading
Memory (GPU VRAM):
- large-v3-turbo: ~2-3GB
- large-v3 + diarization: ~4-5GB
- Reduce --batch-size if OOM
Completion stats: The tool prints segment/word counts, speed ratio, and speaker breakdown (when diarizing) at the end

Supported Languages

WhisperX supports all languages that Whisper supports (99 languages). Forced alignment (word timestamps) is available for a subset — if alignment fails for a language, the tool falls back gracefully to segment-level timestamps.

Languages with alignment support (common subset): en English, zh Chinese, de German, es Spanish, fr French, it Italian, ja Japanese, ko Korean, pt Portuguese, ru Russian, nl Dutch, pl Polish, tr Turkish, ar Arabic, sv Swedish, da Danish, fi Finnish, hu Hungarian, uk Ukrainian, el Greek, cs Czech, ro Romanian, vi Vietnamese, th Thai, hi Hindi, he Hebrew, id Indonesian, ms Malay, no Norwegian, fa Persian, bg Bulgarian, ca Catalan, hr Croatian, sk Slovak, sl Slovenian, ta Tamil, te Telugu, ur Urdu

For the full list, see whisperx/alignment.py.

Hotwords vs Initial Prompt

Both improve accuracy for specific terms, but they work differently:

	`--hotwords`	`--initial-prompt`
How it works	Boosts probability of specific tokens during decoding	Conditions the model as if these words appeared earlier
Best for	Rare terms, proper nouns, technical jargon	Setting domain context, style, formatting
Example	`--hotwords "Kubernetes gRPC OAuth2"`	`--initial-prompt "A technical meeting about cloud infrastructure"`
Can combine	✅ Yes, use both together for best results	✅
Requires	whisperx ≥3.7.5	Any version

Tip: Use hotwords for the specific words you need recognized correctly, and initial prompt for broader context about the audio content.

PyTorch 2.6+ Compatibility (CRITICAL)

⚠️ PyTorch 2.6 changed torch.load() to default to weights_only=True. This breaks pyannote.audio's model loading (used by both VAD and diarization), because the model checkpoints contain globals like omegaconf.listconfig.ListConfig and torch.torch_version.TorchVersion that aren't allowlisted.

Symptoms:

_pickle.UnpicklingError: Weights only load failed when loading VAD or diarization models
'NoneType' object has no attribute 'to' (pipeline silently returns None)

How this skill handles it:

The scripts/transcribe.py uses the whisperx Python API directly (not as a subprocess) so it can monkey-patch torch.load before any model loading happens:

import torch
_original_torch_load = torch.load
def _patched_torch_load(*args, **kwargs):
    kwargs['weights_only'] = False  # Must FORCE, not setdefault — lightning_fabric passes True explicitly
    return _original_torch_load(*args, **kwargs)
torch.load = _patched_torch_load

Key details:

The patch must use kwargs['weights_only'] = False (forced override), NOT kwargs.setdefault('weights_only', False) — because lightning_fabric explicitly passes weights_only=True, which setdefault won't override
The patch must be applied before importing whisperx, pyannote, or any model loading code
This is why the skill uses the Python API instead of shelling out to whisperx CLI — a subprocess can't inherit the monkey-patch
VAD defaults to silero (not pyannote) to avoid a second torch.load issue in the VAD pipeline. Silero loads fine without the patch, but diarization still needs it

Note: whisperx ≥3.8.0 migrated to pyannote-audio v4 with speaker-diarization-community-1, which may resolve some of these compatibility issues. The patch is kept for broad version support.

If whisperx CLI is updated to fix this upstream, the monkey-patch can be removed and the script could switch back to subprocess mode. Track: whisperX#972

Troubleshooting

_pickle.UnpicklingError: Weights only load failed: PyTorch 2.6+ compat issue. If running via CLI (whisperx command directly), this can't be fixed without patching the installed library. Use this skill's scripts/transcribe wrapper instead, which applies the patch automatically. See "PyTorch 2.6+ Compatibility" section above.

"CUDA not available": Install PyTorch with CUDA (pip install torch --index-url https://download.pytorch.org/whl/cu121)

"No module named whisperx": Run ./setup.sh or pip install whisperx

Diarization 403 error: You must accept the model agreement(s). For whisperx ≥3.8.0: accept community-1. For earlier versions: accept both speaker-diarization-3.1 and segmentation-3.0. See Setup above.

Diarization fails but transcription continues: v1.1.0+ gracefully handles diarization failures — it prints a diagnostic error and continues without speaker labels instead of crashing.

'NoneType' object has no attribute 'to': Either the HF token is invalid, the model agreements haven't been accepted, or the torch.load patch isn't applied. Check all three.

OOM on GPU: Lower --batch-size to 4 or 2

Alignment fails for language X: The language may not have a wav2vec2 alignment model. The tool will fall back to segment-level timestamps and print a warning. Check supported languages in whisperx alignment.py.

Slow on CPU: Expected — use GPU for practical transcription. Even tiny model on CPU is ~5-10x slower than large-v3-turbo on a mid-range GPU.

Empty output / no segments: Audio may be silence or too short. Check with ffprobe audio.mp3 to verify the file has actual audio content. v1.1.0+ prints a warning and produces valid empty output instead of crashing.

Timestamps wrong after trimming: If using --start, timestamps in the output reflect the original file's timeline (not relative to the trim point). This is by design — subtitle timecodes stay correct for the source video.

"No speech detected" warning: The audio file may contain only music, silence, or non-speech sounds. This is expected behavior, not an error.

Upstream Changes

whisperx 3.8.0 (Feb 2026): Migrated to pyannote-audio v4 with speaker-diarization-community-1. This model has lower diarization error rates across all benchmarks compared to the older speaker-diarization-3.1. Upgrade recommended: pip install --upgrade whisperx

whisperx 3.7.5: Added --hotwords support for boosting recognition of specific terms. This skill exposes it via the --hotwords flag.

References

WhisperX GitHub
WhisperX Paper (INTERSPEECH 2023)
pyannote.audio — speaker diarization
faster-whisper — CTranslate2 backend

name	whisperx
description	Speech-to-text with word-level timestamps, speaker diarization, and forced alignment using WhisperX. Built on faster-whisper with batched inference for 70x realtime speed.
version	1.0.0
author	Sarah Mak
tags	["audio","transcription","whisperx","speech-to-text","diarization","alignment","subtitles","ml","cuda","gpu"]
homepage	https://github.com/ThePlasmak/whisperx
platforms	["linux","macos","wsl2"]
metadata	{"openclaw":{"emoji":"🎙️","requires":{"bins":["ffmpeg","python3"]}}}

WhisperX

Speech-to-text with word-level timestamps, speaker diarization, and forced alignment — built on faster-whisper with batched inference for up to 70x realtime transcription speed.

WhisperX extends Whisper with three key capabilities that faster-whisper alone doesn't provide:

Forced alignment — precise word-level timestamps via phoneme ASR models (wav2vec2)
Speaker diarization — label who said what (via pyannote.audio)
Batched inference — process audio in parallel chunks for massive speedup

When to Use

Use this skill when you need to:

Transcribe with word-level timing — subtitles, captions, karaoke-style highlighting
Identify speakers — meetings, interviews, podcasts, multi-speaker recordings
Generate subtitle files — SRT, VTT with accurate word timestamps
Translate speech to English — from any supported language
Batch transcribe — efficient processing of multiple files
Transcribe a section — extract just part of a long recording

Trigger phrases: "transcribe with speakers", "who said what", "diarize", "make subtitles", "word timestamps", "speaker identification", "meeting transcript", "karaoke subtitles"

When NOT to use:

Simple transcription without speaker/timing needs → use faster-whisper (lighter, faster)
Real-time/streaming transcription
Files <10 seconds where setup overhead isn't worth it

WhisperX vs faster-whisper:

Feature	faster-whisper	WhisperX
Basic transcription	✅	✅
Word timestamps	✅ (approximate)	✅ (precise, aligned)
Speaker diarization	❌	✅
Forced alignment	❌	✅
Batched inference	❌	✅
Word-level subtitles	❌	✅ (karaoke-style)
Subtitle generation	Manual	Built-in (SRT/VTT/TSV)
Time range trimming	❌	✅ (--start/--end)
Hotwords	❌	✅ (boost specific terms)
Initial prompt	❌	✅ (domain terms)
Speaker renaming	❌	✅ (--speaker-names)
Stdin pipe	❌	✅ (read from `-`)
Setup complexity	Simple	Requires HF token for diarization

Quick Reference

Task	Command	Notes
Basic transcription	`./scripts/transcribe audio.mp3`	Word-aligned by default
With speakers	`./scripts/transcribe audio.mp3 --diarize`	Auto-reads `~/.cache/huggingface/token`
Clean speaker output	`./scripts/transcribe audio.mp3 --diarize --merge-speakers`	Merges consecutive same-speaker segments
Named speakers	`./scripts/transcribe audio.mp3 --diarize --speaker-names "Alice,Bob"`	Replaces SPEAKER_00, SPEAKER_01
SRT subtitles	`./scripts/transcribe audio.mp3 --srt -o subs.srt`	Ready for video players
Word-level SRT	`./scripts/transcribe audio.mp3 --srt --word-level`	Karaoke-style, one word per cue
Wrapped subtitles	`./scripts/transcribe audio.mp3 --srt --max-line-width 42`	Standard TV subtitle width
VTT subtitles	`./scripts/transcribe audio.mp3 --vtt -o subs.vtt`	Web-compatible with `<v>` speaker tags
JSON output	`./scripts/transcribe audio.mp3 --json`	Full data with word timestamps
TSV output	`./scripts/transcribe audio.mp3 --tsv`	Spreadsheet-friendly
Translate to English	`./scripts/transcribe audio.mp3 --translate`	Any language → English
Fast, no alignment	`./scripts/transcribe audio.mp3 --no-align`	Skip forced alignment
Specific language	`./scripts/transcribe audio.mp3 -l en`	Faster than auto-detect
Partial transcription	`./scripts/transcribe audio.mp3 --start 1:30 --end 5:00`	Only a section
Boost terms	`./scripts/transcribe audio.mp3 --hotwords "Kubernetes gRPC"`	Improve rare term recognition
Domain accuracy	`./scripts/transcribe audio.mp3 --initial-prompt "OpenAI, GPT-4"`	Condition the model
From stdin	`cat audio.mp3 \| ./scripts/transcribe -`	Pipe from other tools
Auto-detect format	`./scripts/transcribe audio.mp3 -o out.srt`	Format from extension

⚠️ Do NOT run whisperx CLI directly — it will crash on PyTorch 2.6+ with pyannote models. Always use this skill's ./scripts/transcribe wrapper.

Model Selection

Model	Size	Speed	Accuracy	Use Case
`tiny`	39M	Fastest	Basic	Quick drafts, testing
`base`	74M	Very fast	Good	General use
`small`	244M	Fast	Better	Default for whisperx CLI
`medium`	769M	Moderate	High	Quality transcription
`large-v2`	1.5GB	Slower	Excellent	Best diarization compat
`large-v3`	1.5GB	Slower	Best	Maximum accuracy
`large-v3-turbo`	809M	Fast	Excellent	Recommended (default)

Note: WhisperX defaults to small but this skill defaults to large-v3-turbo for the best speed/accuracy balance with GPU.

Setup

First-Time Setup

Prerequisites: Python 3.10+, ffmpeg, NVIDIA GPU with CUDA (strongly recommended)

Step 1: Install whisperx

# Option A: Run the setup script (auto-detects GPU, creates venv if needed)
./setup.sh

# Option B: Install globally (if you prefer)
pip install whisperx

Step 2 (optional, for diarization): Set up Hugging Face token

Speaker diarization requires a free Hugging Face account and access to gated models. Skip this if you only need transcription/alignment.

Create account at huggingface.co (if you don't have one)
Go to huggingface.co/settings/tokens and create a read access token
Accept the model agreement(s) (click "Agree and access repository"):
- whisperx ≥3.8.0 (recommended): Accept pyannote/speaker-diarization-community-1 — uses pyannote v4 with better accuracy
- whisperx <3.8.0: Accept both pyannote/speaker-diarization-3.1 and pyannote/segmentation-3.0

Save the token so the script auto-detects it:

mkdir -p ~/.cache/huggingface && echo -n "hf_YOUR_TOKEN" > ~/.cache/huggingface/token && chmod 600 ~/.cache/huggingface/token

Alternatively: set HF_TOKEN env var, or pass --hf-token per-command.

Note: The token and model access are completely free. The models are just gated behind a click-to-agree license. Without step 3, you'll get a 403 error even with a valid token.

Subsequent Runs

No setup needed — just run ./scripts/transcribe. The wrapper script:

Auto-detects GPU/CPU and picks optimal compute type
Auto-reads the HF token from ~/.cache/huggingface/token for diarization
Applies the PyTorch 2.6+ compatibility patch automatically (see below)
First run for a new model downloads it to ~/.cache/huggingface/ (one-time per model)

Checking If It's Working

# Quick test — should print transcript to stdout
./scripts/transcribe some_audio.mp3

# Test diarization — should show [SPEAKER_00], [SPEAKER_01], etc.
./scripts/transcribe some_audio.mp3 --diarize

# Check version
./scripts/transcribe --version

# If diarization fails with 403: model agreements not accepted (see step 3 above)
# If it crashes with pickle/weights_only error: you're running `whisperx` CLI directly instead of the wrapper

Platform Support

Platform	Acceleration	Speed
Linux + NVIDIA GPU	CUDA (batched)	~70x realtime 🚀
WSL2 + NVIDIA GPU	CUDA (batched)	~70x realtime 🚀
macOS Apple Silicon	CPU	~3-5x realtime
macOS Intel	CPU	~1-2x realtime
Linux (no GPU)	CPU	~1x realtime

Usage

All commands use ./scripts/transcribe — resolve the path relative to this skill's directory.

# Basic transcription (word-aligned)
./scripts/transcribe audio.mp3

# With speaker diarization (auto-reads ~/.cache/huggingface/token)
./scripts/transcribe audio.mp3 --diarize

# Diarize with merged same-speaker segments (cleaner output)
./scripts/transcribe audio.mp3 --diarize --merge-speakers

# Rename speakers to real names
./scripts/transcribe audio.mp3 --diarize --speaker-names "Alice,Bob,Charlie"

# Generate SRT subtitles
./scripts/transcribe audio.mp3 --srt -o subtitles.srt

# SRT with line wrapping (standard TV width)
./scripts/transcribe audio.mp3 --srt --max-line-width 42 -o subtitles.srt

# Word-level karaoke subtitles (one word per cue with precise timing)
./scripts/transcribe audio.mp3 --srt --word-level -o karaoke.srt

# VTT with speaker voice tags (<v Speaker>text</v>)
./scripts/transcribe audio.mp3 --vtt --diarize -o subtitles.vtt

# Auto-detect format from output filename
./scripts/transcribe audio.mp3 -o transcript.json
./scripts/transcribe audio.mp3 -o subtitles.vtt

# TSV for spreadsheets/data analysis
./scripts/transcribe audio.mp3 --tsv -o transcript.tsv

# Transcribe only a section (useful for long recordings)
./scripts/transcribe podcast.mp3 --start 10:30 --end 15:00

# Boost recognition of specific terms (hotwords)
./scripts/transcribe meeting.mp3 --hotwords "Kubernetes gRPC OAuth2"

# Improve accuracy for domain context (initial prompt)
./scripts/transcribe meeting.mp3 --initial-prompt "Attendees: Alice, Bob. Topics: Kubernetes, gRPC, OAuth2"

# Maximum accuracy
./scripts/transcribe audio.mp3 --model large-v3

# Translate non-English audio to English
./scripts/transcribe audio.mp3 --translate -l ja

# Fast mode (skip alignment)
./scripts/transcribe audio.mp3 --no-align

# JSON with full metadata and word timestamps
./scripts/transcribe audio.mp3 --json -o transcript.json

# Specify known speaker count for better diarization
./scripts/transcribe audio.mp3 --diarize --min-speakers 2 --max-speakers 4

# Read audio from stdin (pipe from other tools)
cat audio.mp3 | ./scripts/transcribe -
ffmpeg -i video.mp4 -f wav - | ./scripts/transcribe - --diarize

Options

AUDIO_FILE               Path to audio/video file, or '-' to read from stdin

Model options:
  -m, --model NAME       Whisper model (default: large-v3-turbo)
  --batch-size N         Batch size for inference (default: 8, lower if OOM)
  --beam-size N          Beam search size (higher = slower but more accurate)
  --initial-prompt TEXT   Condition the model with domain terms, names, acronyms
  --hotwords TEXT         Space-separated hotwords to boost recognition of rare terms

Device options:
  --device               cpu, cuda, or auto (default: auto)
  --compute-type         int8, float16, float32, or auto (default: auto)
  --threads N            CPU threads for CTranslate2 inference (default: 4)

Language options:
  -l, --language CODE    Language code (auto-detects if omitted)
  --translate            Translate to English

Time range:
  --start TIME           Start time — seconds (90), MM:SS (1:30), HH:MM:SS
  --end TIME             End time — same formats as --start

Alignment options:
  --no-align             Skip forced alignment (no word timestamps)
  --align-model MODEL    Custom phoneme ASR model for alignment

Speaker diarization:
  --diarize              Enable speaker labels
  --hf-token TOKEN       Hugging Face access token (also reads ~/.cache/huggingface/token or HF_TOKEN env)
  --min-speakers N       Minimum speaker count hint
  --max-speakers N       Maximum speaker count hint
  --merge-speakers       Merge consecutive segments from same speaker (cleaner output)
  --speaker-names NAMES  Comma-separated names to replace SPEAKER_00, SPEAKER_01, etc.

Output options:
  -j, --json             JSON output with segments and word timestamps
  --srt                  SRT subtitle format
  --vtt                  WebVTT subtitle format (uses <v> voice tags for speakers)
  --tsv                  TSV (tab-separated values) for data analysis
  --word-level           Word-level subtitles (SRT/VTT only) — karaoke-style
  --max-line-width N     Maximum characters per subtitle line (wraps at word boundaries)
  --output-format FMT    Explicit format (srt, vtt, txt, json, tsv)
  -o, --output FILE      Save to file (format auto-detected from extension)

Miscellaneous:
  -V, --version          Show version
  -q, --quiet            Suppress progress messages

Output Formats

Plain Text (default)

Hello and welcome to the show.
Today we're talking about AI transcription.

Plain Text with Diarization (`--diarize`)

[SPEAKER_00] Hello and welcome to the show.
[SPEAKER_01] Thanks for having me.

Plain Text with Named Speakers (`--diarize --speaker-names "Alice,Bob"`)

[Alice] Hello and welcome to the show.
[Bob] Thanks for having me.

SRT (`--srt`)

Standard subtitle format, compatible with VLC, YouTube, etc.

1
00:00:00,000 --> 00:00:03,500
Hello and welcome to the show.

2
00:00:03,500 --> 00:00:06,200
Today we're talking about AI transcription.

Word-Level SRT (`--srt --word-level`)

One word per cue — for karaoke-style highlighting or precise editing.

1
00:00:00,000 --> 00:00:00,320
Hello

2
00:00:00,320 --> 00:00:00,560
and

3
00:00:00,560 --> 00:00:01,100
welcome

WebVTT (`--vtt`)

Web-native subtitle format for HTML5 <video> and <track>. When used with --diarize, uses proper VTT <v> voice tags for speaker identification.

WEBVTT

00:00:00.000 --> 00:00:03.500
<v Alice>Hello and welcome to the show.</v>

00:00:03.500 --> 00:00:05.000
<v Bob>Thanks for having me.</v>

JSON (`--json`)

Structured output with word-level timestamps and confidence scores.

{
  "segments": [
    {
      "start": 0.0,
      "end": 3.5,
      "text": "Hello and welcome to the show.",
      "speaker": "SPEAKER_00",
      "words": [
        {"word": "Hello", "start": 0.0, "end": 0.32, "confidence": 0.98},
        {"word": "and", "start": 0.32, "end": 0.56, "confidence": 0.95}
      ]
    }
  ]
}

TSV (`--tsv`)

Tab-separated values for spreadsheets and data pipelines.

start	end	text
0.000	3.500	Hello and welcome to the show.
3.500	6.200	Today we're talking about AI transcription.

Examples

# Transcribe a meeting recording with speakers (clean output)
./scripts/transcribe meeting.mp3 --diarize --merge-speakers \
  --speaker-names "Alice,Bob,Charlie" \
  --min-speakers 3 --max-speakers 5 --json -o meeting.json

# Generate subtitles for a video (wrapped to standard width)
./scripts/transcribe video.mp4 --srt --max-line-width 42 -o video.srt

# Karaoke-style word-level subtitles
./scripts/transcribe song.mp3 --vtt --word-level -o karaoke.vtt

# Transcribe just the interesting part of a podcast
./scripts/transcribe podcast.mp3 --start 45:00 --end 1:02:30 --diarize --merge-speakers

# Improve accuracy for technical content (hotwords + initial prompt)
./scripts/transcribe lecture.mp3 \
  --hotwords "PyTorch CTranslate2 whisperx" \
  --initial-prompt "A lecture on ML model optimization"

# Batch transcribe a folder
for file in recordings/*.mp3; do
  ./scripts/transcribe "$file" --json -o "${file%.mp3}.json"
done

# Transcribe YouTube audio (with yt-dlp)
yt-dlp -x --audio-format mp3 <URL> -o audio.mp3
./scripts/transcribe audio.mp3 --diarize --merge-speakers

# Pipe directly from ffmpeg (extract audio on the fly)
ffmpeg -i video.mp4 -f wav -ac 1 -ar 16000 - 2>/dev/null | ./scripts/transcribe -

# Quick draft (fast, no alignment)
./scripts/transcribe audio.mp3 --model base --no-align

# German audio with TSV output for analysis
./scripts/transcribe audio.mp3 -l de --tsv -o transcript.tsv

# Auto-detect format from filename
./scripts/transcribe audio.mp3 -o transcript.srt   # → SRT
./scripts/transcribe audio.mp3 -o data.json         # → JSON
./scripts/transcribe audio.mp3 -o export.tsv        # → TSV

Common Mistakes

Mistake	Problem	Solution
Using CPU when GPU available	10-70x slower	Check `nvidia-smi`; verify CUDA
Missing HF token for diarize	Diarization fails	Get token from huggingface.co/settings/tokens
Not accepting model agreements	403 error on diarization model	whisperx ≥3.8.0: accept community-1. Earlier: accept both pyannote/speaker-diarization-3.1 AND segmentation-3.0 (see Setup)
Running `whisperx` CLI directly	Crashes on PyTorch 2.6+	Always use `./scripts/transcribe` wrapper (applies torch.load patch)
batch_size too high	CUDA OOM	Lower `--batch-size` (try 4 or 2)
Using large-v3 when turbo works	Unnecessary slowdown	`large-v3-turbo` is faster with near-identical accuracy
Forgetting --language	Wastes time auto-detecting	Specify `-l en` when you know the language
Using WhisperX for simple transcription	Heavier setup for no benefit	Use faster-whisper for basic transcription
--word-level without --srt/--vtt	Flag is ignored	Word-level only applies to subtitle formats
--merge-speakers without --diarize	Flag is ignored	Merge only works when speakers are identified

Performance Notes

First run: Downloads model + alignment model (one-time)
GPU batched inference: Up to 70x realtime with large-v2
Diarization: Adds ~30-60s overhead for model loading
Memory (GPU VRAM):
- large-v3-turbo: ~2-3GB
- large-v3 + diarization: ~4-5GB
- Reduce --batch-size if OOM
Completion stats: The tool prints segment/word counts, speed ratio, and speaker breakdown (when diarizing) at the end

Supported Languages

For the full list, see whisperx/alignment.py.

Hotwords vs Initial Prompt

Both improve accuracy for specific terms, but they work differently:

	`--hotwords`	`--initial-prompt`
How it works	Boosts probability of specific tokens during decoding	Conditions the model as if these words appeared earlier
Best for	Rare terms, proper nouns, technical jargon	Setting domain context, style, formatting
Example	`--hotwords "Kubernetes gRPC OAuth2"`	`--initial-prompt "A technical meeting about cloud infrastructure"`
Can combine	✅ Yes, use both together for best results	✅
Requires	whisperx ≥3.7.5	Any version

Tip: Use hotwords for the specific words you need recognized correctly, and initial prompt for broader context about the audio content.

PyTorch 2.6+ Compatibility (CRITICAL)

Symptoms:

_pickle.UnpicklingError: Weights only load failed when loading VAD or diarization models
'NoneType' object has no attribute 'to' (pipeline silently returns None)

How this skill handles it:

The scripts/transcribe.py uses the whisperx Python API directly (not as a subprocess) so it can monkey-patch torch.load before any model loading happens:

import torch
_original_torch_load = torch.load
def _patched_torch_load(*args, **kwargs):
    kwargs['weights_only'] = False  # Must FORCE, not setdefault — lightning_fabric passes True explicitly
    return _original_torch_load(*args, **kwargs)
torch.load = _patched_torch_load

Key details:

The patch must use kwargs['weights_only'] = False (forced override), NOT kwargs.setdefault('weights_only', False) — because lightning_fabric explicitly passes weights_only=True, which setdefault won't override
The patch must be applied before importing whisperx, pyannote, or any model loading code
This is why the skill uses the Python API instead of shelling out to whisperx CLI — a subprocess can't inherit the monkey-patch
VAD defaults to silero (not pyannote) to avoid a second torch.load issue in the VAD pipeline. Silero loads fine without the patch, but diarization still needs it

Note: whisperx ≥3.8.0 migrated to pyannote-audio v4 with speaker-diarization-community-1, which may resolve some of these compatibility issues. The patch is kept for broad version support.

If whisperx CLI is updated to fix this upstream, the monkey-patch can be removed and the script could switch back to subprocess mode. Track: whisperX#972

Troubleshooting

"CUDA not available": Install PyTorch with CUDA (pip install torch --index-url https://download.pytorch.org/whl/cu121)

"No module named whisperx": Run ./setup.sh or pip install whisperx

Diarization fails but transcription continues: v1.1.0+ gracefully handles diarization failures — it prints a diagnostic error and continues without speaker labels instead of crashing.

'NoneType' object has no attribute 'to': Either the HF token is invalid, the model agreements haven't been accepted, or the torch.load patch isn't applied. Check all three.

OOM on GPU: Lower --batch-size to 4 or 2

Slow on CPU: Expected — use GPU for practical transcription. Even tiny model on CPU is ~5-10x slower than large-v3-turbo on a mid-range GPU.

"No speech detected" warning: The audio file may contain only music, silence, or non-speech sounds. This is expected behavior, not an error.

Upstream Changes

whisperx 3.7.5: Added --hotwords support for boosting recognition of specific terms. This skill exposes it via the --hotwords flag.

References

WhisperX GitHub
WhisperX Paper (INTERSPEECH 2023)
pyannote.audio — speaker diarization
faster-whisper — CTranslate2 backend

whisperx

WhisperX

When to Use

Quick Reference

Model Selection

Setup

First-Time Setup

Subsequent Runs

Checking If It's Working

Platform Support

Usage

Options

Output Formats

Plain Text (default)

Plain Text with Diarization (--diarize)

Plain Text with Named Speakers (--diarize --speaker-names "Alice,Bob")

SRT (--srt)

Word-Level SRT (--srt --word-level)

WebVTT (--vtt)

JSON (--json)

TSV (--tsv)

Examples

Common Mistakes

Performance Notes

Supported Languages

Hotwords vs Initial Prompt

PyTorch 2.6+ Compatibility (CRITICAL)

Troubleshooting

Upstream Changes

References

WhisperX

When to Use

Quick Reference

Model Selection

Setup

First-Time Setup

Subsequent Runs

Checking If It's Working

Platform Support

Usage

Options

Output Formats

Plain Text (default)

Plain Text with Diarization (--diarize)

Plain Text with Named Speakers (--diarize --speaker-names "Alice,Bob")

SRT (--srt)

Word-Level SRT (--srt --word-level)

WebVTT (--vtt)

JSON (--json)

TSV (--tsv)

Examples

Common Mistakes

Performance Notes

Supported Languages

Hotwords vs Initial Prompt

PyTorch 2.6+ Compatibility (CRITICAL)

Troubleshooting

Upstream Changes

References

Plain Text with Diarization (`--diarize`)

Plain Text with Named Speakers (`--diarize --speaker-names "Alice,Bob"`)

SRT (`--srt`)

Word-Level SRT (`--srt --word-level`)

WebVTT (`--vtt`)

JSON (`--json`)

TSV (`--tsv`)

Plain Text with Diarization (`--diarize`)

Plain Text with Named Speakers (`--diarize --speaker-names "Alice,Bob"`)

SRT (`--srt`)

Word-Level SRT (`--srt --word-level`)

WebVTT (`--vtt`)

JSON (`--json`)

TSV (`--tsv`)