v4-hook-generator

name	v4-hook-generator
description	Generate Uniswap v4 hook contracts via OpenZeppelin MCP. Use when building custom swap logic, async swaps, hook-owned liquidity, custom curves, dynamic fees, MEV protection, limit orders, or oracle hooks.
allowed-tools	Read, Glob, Grep, WebFetch, Bash
model	opus
license	MIT
metadata	{"author":"uniswap","version":"1.0.0"}

v4 Hook Generator

Generate Uniswap v4 hook contracts via the OpenZeppelin Contracts Wizard MCP tool. This skill guides you through selecting the right hook type, configuring permissions and utilities, assembling the canonical MCP JSON, and invoking the MCP tool to produce ready-to-compile Solidity code.

Security companion: Generated hook code touches fund-handling contracts. Always apply the v4-security-foundations skill immediately after generation to audit permissions, delta accounting, and access control before deploying to any network.

When to Use This Skill

Use this skill when you need to:

• Scaffold a new Uniswap v4 hook contract from scratch
• Select the right base hook type for a specific use case (fees, MEV protection, oracles, etc.)
• Configure hook permissions, utility libraries, shares, and access control
• Produce the canonical MCP tool call JSON to invoke the OpenZeppelin Contracts Wizard
• Understand trade-offs between hook configuration options before committing to an implementation

Prerequisite / companion skill: v4-security-foundations — run it before writing custom logic and again before deployment. Hook misconfiguration can drain user funds.

Hook Type Decision Table

Choose the base hook type that matches your primary goal. If your hook has multiple goals, choose the type that covers the most critical concern and layer additional logic on top.

Goal	Use Hook
Custom swap logic	BaseHook
Async/delayed swaps	BaseAsyncSwap
Hook-owned liquidity	BaseCustomAccounting
Custom curve	BaseCustomCurve
Dynamic LP fees	BaseDynamicFee
Dynamic swap fees	BaseOverrideFee
Post-swap fees	BaseDynamicAfterFee
Fixed hook fees	BaseHookFee
MEV protection	AntiSandwichHook
JIT protection	LiquidityPenaltyHook
Limit orders	LimitOrderHook
Yield on idle	ReHypothecationHook
Oracle	BaseOracleHook
V3-compatible oracle	OracleHookWithV3Adapters

Selection tips:

• BaseHook is the general-purpose starting point — choose a specialized type only when the built-in logic provides concrete value.
• BaseCustomCurve replaces the entire AMM math; only use it if you are implementing a novel pricing algorithm.
• AntiSandwichHook and LiquidityPenaltyHook both address MEV but target different actors (traders vs. JIT LPs). Clarify which attack vector you are mitigating.
• OracleHookWithV3Adapters is appropriate when downstream integrations expect a Uniswap v3 IUniswapV3Pool-compatible oracle interface.

Minimal Decision Checklist

Before calling the MCP tool, confirm all six decisions:

1. Hook type — chosen from the decision table above
2. Permissions to enable — only the callbacks your logic actually uses (beforeSwap, afterSwap, etc.)
3. Utility libraries — currencySettler, safeCast, transientStorage as needed
4. Shares — false, ERC20, ERC6909, or ERC1155
5. Access control — ownable, roles, or managed
6. Hook inputs — blockNumberOffset, maxAbsTickDelta (only for hook types that use them)

Permission Configuration

All 14 permission flags with guidance on when to enable each. Start with all flags false and enable only what your hook logic requires. Every enabled permission increases the hook's attack surface and requires a specific bit to be set in the hook's deployed address (see address encoding note below).

Permission Flag	Enable When	Risk
beforeInitialize	You need to validate or restrict pool creation params	LOW
afterInitialize	You need to set up state after a pool is created	LOW
beforeAddLiquidity	You need to gate or transform LP deposits	MEDIUM
afterAddLiquidity	You track LP positions or distribute rewards	LOW
beforeRemoveLiquidity	You need lock-up periods or fee-on-exit logic	HIGH
afterRemoveLiquidity	You track position removals for accounting	LOW
beforeSwap	You modify swap behavior, apply dynamic fees, or block	HIGH
afterSwap	You observe final swap state for oracles or accounting	MEDIUM
beforeDonate	You restrict who may donate to the pool	LOW
afterDonate	You track donation events	LOW
beforeSwapReturnDelta	You implement custom AMM curves or JIT liquidity (CRITICAL: NoOp attack vector — see v4-security-foundations)	CRITICAL
afterSwapReturnDelta	You extract a hook fee from swap output	HIGH
afterAddLiquidityReturnDelta	You adjust LP token amounts on deposit	HIGH
afterRemoveLiquidityReturnDelta	You adjust withdrawal amounts	HIGH

Address encoding note: Permissions are encoded as bits in the hook contract's deployed address. The address must have the correct bits set at deployment time or the PoolManager will revert. Use HookMiner (from v4-periphery) to mine a salt that produces an address with the correct bit pattern. Never change permissions after deployment — the address is immutable.

Utility Library Selection

Three optional utility libraries can be included in the generated hook. Include only what your hook logic uses.

Library	Include When
currencySettler	Your hook moves tokens between itself and the PoolManager (e.g., custom accounting, fee collection)
safeCast	Your hook performs arithmetic that could overflow when casting between integer types
transientStorage	Your hook needs to pass data between callbacks within a single transaction without persisting to storage (requires EVM Cancun or later, Solidity >= 0.8.24)

Guidance:

• currencySettler is almost always needed when beforeSwapReturnDelta, afterSwapReturnDelta, afterAddLiquidityReturnDelta, or afterRemoveLiquidityReturnDelta are enabled — it provides settle and take helpers that implement the correct sync → transfer → settle sequence.
• transientStorage is a gas-efficient alternative to storage slots for intra-transaction state. Use it to pass a flag or value from beforeSwap to afterSwap without paying 20k gas for a cold SSTORE.
• safeCast is advisable whenever you compute amounts derived from int256/uint256 conversions, especially for fee calculations.

Shares Configuration

The shares option controls whether the generated hook issues a token representing user shares (e.g., LP positions in hook-owned liquidity pools).

Option	Description	Use When
false	No share token — hook does not track ownership of deposited assets	Simple hooks that do not hold user funds
ERC20	Fungible share token — one token represents proportional ownership of all hook-held assets	Hook-managed liquidity pools with interchangeable shares
ERC6909	Multi-token (minimal) — one contract manages many token IDs with lower overhead than ERC1155	Hook manages multiple distinct asset classes efficiently
ERC1155	Multi-token (standard) — full ERC1155 with metadata URI support	Hook needs broad wallet and marketplace compatibility

Trade-offs:

• false: smallest bytecode, no share accounting overhead; appropriate for fee hooks and oracles.
• ERC20: simplest fungible share; good DeFi composability (e.g., used as collateral).
• ERC6909: gas-efficient multi-token with a minimal interface; preferred for new protocol designs.
• ERC1155: widest ecosystem support (wallets, explorers, NFT marketplaces); higher gas cost per transfer than ERC6909.

Access Control Options

The access option shapes the constructor and administrative interface of the generated hook.

Option	Constructor Shape	Use When
ownable	constructor(IPoolManager, address initialOwner)	Single owner controls all admin functions
roles	constructor(IPoolManager, address admin)	Multiple roles with granular permissions (OpenZeppelin AccessControl)
managed	constructor(IPoolManager, address authority)	External authority contract governs permissions (OpenZeppelin AccessManaged)

Guidance:

• ownable is the simplest — one address can perform all privileged operations. Suitable for early-stage hooks and personal tools.
• roles adds ADMIN_ROLE, PAUSER_ROLE, etc. via OpenZeppelin AccessControl. Use when different team members need different privileges (e.g., a keeper bot that can update fees but cannot upgrade the contract).
• managed delegates all permission checks to a separate AccessManager contract. Use when you need a unified governance layer across multiple contracts or want timelocked admin actions.

Note: Changing the access option changes the constructor signature. Update deployment scripts and initialization logic accordingly. When using ownable, ensure the initialOwner is not the zero address — OpenZeppelin's Ownable reverts on zero address since v5.

Hook Inputs Reference

Some hook types accept numeric configuration inputs that tune behavior. These are passed as the inputs object in the MCP tool call.

Input	Type	Used By	Description
blockNumberOffset	uint256	AntiSandwichHook, LiquidityPenaltyHook	Number of blocks before sandwich/JIT detection window opens
maxAbsTickDelta	int24	AntiSandwichHook	Maximum tick movement allowed per block before MEV protection triggers

For hook types that do not use these inputs, omit the inputs field or pass an empty object {}. Passing unsupported inputs to the MCP tool will not cause an error but the values will be ignored.

MCP Tool Call (Canonical)

The OpenZeppelin Contracts Wizard exposes a generate_hook MCP tool. The following is the canonical JSON schema — populate each field according to your decisions from the sections above, then pass this object as the tool's argument.

{
  "hook": "BaseHook",
  "name": "MyHook",
  "pausable": false,
  "currencySettler": true,
  "safeCast": true,
  "transientStorage": false,
  "shares": { "options": false },
  "permissions": {
    "beforeInitialize": false,
    "afterInitialize": false,
    "beforeAddLiquidity": false,
    "beforeRemoveLiquidity": false
     
     
     
     
     
     
     
     
     
     
  
   
     
     
  
   
      

Field notes:

• hook: string — one of the 14 hook types from the decision table
• name: string — the Solidity contract name (PascalCase, no spaces)
• pausable: boolean — wraps the hook in OpenZeppelin Pausable; adds pause()/unpause() admin functions
• shares.options: false | "ERC20" | "ERC6909" | "ERC1155"
• access: "ownable" | "roles" | "managed"
• info.license: SPDX license identifier — use "MIT" for open-source hooks
• inputs: omit or pass {} for hook types that do not use blockNumberOffset/maxAbsTickDelta

Workflow: Gather → Configure → Generate → Secure

Follow these steps in order every time you use this skill.

Step 1: Gather Requirements

Ask the user (or infer from context):

1. What is the hook's primary goal? (Map to the decision table.)
2. Which lifecycle events does the hook need to intercept? (Map to permissions.)
3. Does the hook hold or move user funds? (Determines currencySettler and shares.)
4. Who administers the hook? (Single owner, role-based team, or external governance?)
5. Does the hook need to pass state between callbacks within a single transaction?
6. Is this for a chain with EVM Cancun support? (Required for transientStorage.)

Step 2: Select Hook Type

Using the decision table, identify the single best hook type. If the user's goal maps to multiple types, explain the trade-offs and ask them to confirm. Document the chosen type and the reasoning.

Step 3: Configure All Six Decisions

Work through the minimal decision checklist:

1. Set hook to the chosen type.
2. Set each permission flag — default false, enable only what the logic requires.
3. Set currencySettler, safeCast, transientStorage based on utility library guidance.
4. Set shares.options based on shares guidance.
5. Set access based on access control guidance.
6. Set inputs only if the hook type uses blockNumberOffset or maxAbsTickDelta.

Step 4: Assemble and Call the MCP Tool

Construct the JSON object from Step 3 and call the OpenZeppelin Contracts Wizard MCP tool with it. The tool returns Solidity source code — it does not write files automatically.

After receiving the generated code:

1. Display the code to the user.
2. Explain the key generated sections (constructor, getHookPermissions, enabled callbacks).
3. Note any manual steps required (HookMiner for address mining, deployment script updates for constructor args if access is roles or managed).

Step 5: Apply Security Foundations

Always remind the user — and invoke v4-security-foundations — before the code is deployed:

• Verify all enabled callbacks check msg.sender == address(poolManager).
• Review any enabled *ReturnDelta permissions for NoOp attack exposure.
• Confirm delta accounting sums to zero for every execution path.
• Run the full pre-deployment audit checklist from v4-security-foundations.

Important Notes

• Access control changes constructor shape: Choosing ownable adds an initialOwner parameter; roles adds an admin parameter; managed adds an authority parameter. Update deployment scripts and factory contracts accordingly.
• Permissions encode in the hook address: Each enabled permission flag corresponds to a specific bit in the lower bytes of the hook's deployed address. The PoolManager validates these bits on every callback. Use HookMiner from v4-periphery to mine a deployment salt that produces a matching address.
• MCP returns code only — it does not write files: The generated Solidity is returned as a string. You must write it to disk yourself (e.g., packages/contracts/src/hooks/MyHook.sol).

Related Skills

• v4-security-foundations — Run this after generation. Security audit for Uniswap v4 hooks: permission risk matrix, NoOp attack patterns, delta accounting, access control verification, and the full pre-deployment audit checklist. Generated hook code should never be deployed without completing this review.
• viem-integration — Deploy generated hook contracts and interact with them using viem/wagmi
• v4-sdk-integration — Interact with deployed hooks via the Uniswap v4 SDK