| name | scienceworld-conditional-placer |
| description | Places an object into one of several designated containers based on a measured condition, such as a temperature threshold. Use this skill when you have completed a measurement or assessment and the task requires sorting or storing the object into one of multiple containers according to a rule (e.g., "if temperature > X, place in container A; otherwise container B"). |
Skill: Conditional Object Placer
Purpose
Place a target object into the correct container based on a measured condition (e.g., temperature threshold, conductivity result). This skill executes the full measure-then-sort workflow.
Core Workflow
- Locate & Acquire Measurement Tool:
teleport to LOC then pick up the measurement device (e.g., thermometer).
- Locate & Acquire Target Object:
teleport to LOC then pick up the object to be measured (e.g., metal fork).
- Identify Target Containers: Use
look around to find the designated containers (e.g., blue box, orange box).
- Perform Measurement:
use OBJ on OBJ (e.g., use thermometer on metal fork) to obtain the value.
- Evaluate Condition & Place: Compare the measured value against the threshold, then
move OBJ to OBJ to place the object in the correct container.
Key Actions
| Action | Purpose |
|---|
teleport to LOC | Navigate between rooms |
look around | Survey a room for objects |
pick up OBJ | Acquire tools or target object |
use OBJ on OBJ | Perform measurement |
move OBJ to OBJ | Place object into selected container |
Example
Task: "Measure the temperature of the metal fork. If above 50C, place in the orange box. Otherwise, place in the blue box."
teleport to kitchenlook around — find thermometer and metal forkpick up thermometerpick up metal forkuse thermometer on metal fork — reads 72 degrees- 72 > 50, so:
move metal fork to orange box
Important Notes
- All containers are pre-opened. Do not use
open or close actions.
- The measurement tool and target object must be picked up and used from inventory.
- Room names, object names, thresholds, and container names vary per task — adapt accordingly.
