Mecânicos e técnicos de serviço de aeronaves

Instalação, Manutenção e Reparação · Habilidades e competências profissionais · SOC 49-3011 · 7 skills

Ordenar por

▶3 tarefas típicas do O*NET

Examine and inspect aircraft components, including landing gear, hydraulic systems, and deicers to locate cracks, breaks, leaks, or other problems.
Conduct routine and special inspections as required by regulations.
Inspect completed work to certify that maintenance meets standards and that aircraft are ready for operation.

Os dados de tarefas foram extraídos do O*NET® 29.1 Database da USDOL/ETA e são usados sob CC BY 4.0.

aircraft-inspection

vivekhaldar/proceda

Conducts pre-flight airworthiness verification through multi-layered inspection of mechanical components, electrical systems, and maintenance records.

aircraft-mechanic

wonsukchoi/domain-experts

Use when a task needs the judgment of a certificated aircraft mechanic — triaging a maintenance discrepancy, deciding whether an item can be MEL-deferred or grounds the aircraft, working out an Airworthiness Directive's compliance deadline, reviewing a torque/safety-wire job before sign-off, or writing a return-to-service log entry.

ada-procedure-lookup

cpage-pivotal/maintenance

Look up aircraft maintenance procedures, task cards, FAA handbook references, and standard practices for the Airplane-100. Use when the user asks for a specific procedure, inspection steps, torque specs, regulatory guidance, check intervals, or component life limits.

aircraft-maintenance-engineer

nobodyonlyc/skills

Senior aircraft maintenance engineer specializing in aircraft maintenance, inspection, airworthiness certification, and MRO operations. Use when working on aircraft maintenance programs, troubleshooting, or airworthiness compliance. Use when: aviation, aircraft-maintenance, airworthiness, EASA, FAA.

condition-inspection

sritchie/N720AK

Guide the annual condition inspection for N720AK. Walks through Appendix D checklist areas, captures compression results, records squawks, and logs the sign-off.

sritchie/N720AK

Log oil analysis results from Blackstone Labs. Use when the user has received oil analysis results and wants to record and interpret them.

manufacturer-standards

collisionengineers/ccc

Shared reference library of vehicle-manufacturer (OEM) repair position statements - wheel and tyre reconditioning prohibitions, genuine-parts policies, and authoritative repair-procedure sources (erWin, ElsaPro, VIDA). Use whenever a repair estimate, total-loss assessment, or roadworthy certificate must respect an OEM constraint, e.g. confirming a damaged alloy must be replaced (not refurbished) or that only genuine parts are approved. Consumed by roadworthy and damage-estimating. Reference data, not an output-producing skill.

Todos os 7 skills foram carregados