Execute qualquer Skill no Manus
com um clique

Execute qualquer Skill no Manus com um clique

$pwd:

opentrade-token

Name: Opentrade Token
Author: 6551Team

// This skill should be used when the user asks to 'find a token', 'search for a token', 'look up PEPE', 'what's trending', 'top tokens', 'trending tokens on Solana', 'token rankings', 'who holds this token', 'holder distribution', 'token market cap', 'token liquidity', 'research a token', 'tell me about this token', 'token info', or mentions searching for tokens by name or address, discovering trending tokens, viewing token rankings, checking holder distribution, or analyzing token market cap and liquidity. Covers token search, metadata, market cap, liquidity, volume, trending token rankings, and holder analysis across XLayer, Solana, Ethereum, Base, BSC, Arbitrum, Polygon, and 20+ other chains. Do NOT use when the user says only a single generic word like 'tokens' or 'crypto' without specifying a token name, action, or question. For simple current price checks, price charts, candlestick data, or trade history, use opentrade-market instead. For meme token safety analysis, developer reputation, rug pull checks,

Executar no Manus

$ git log --oneline --stat

stars:5

forks:0

updated:17 de abril de 2026 às 20:07

SKILL.md

readonly

related-skills.json

mesmo repositório

opentrade-cex.md

from "6551Team/opentrade"

This skill should be used when the user asks to 'place a CEX order', 'trade on centralized exchange', 'buy BTC on CEX', 'sell ETH futures', 'open a long position', 'open a short position', 'close my position', 'set leverage', 'check my CEX balance', 'show my open orders', 'cancel my order', 'check CEX ticker', 'get K-line data', 'set margin mode', 'check my CEX positions', 'view trade history', 'check funding rate', 'get order book', 'check open interest', 'compare funding rates', or mentions CEX trading, futures, contracts, leverage, margin, limit orders, market orders, stop-loss, take-profit, funding rate, order book, open interest. This is for centralized exchange operations only. Do NOT use for DEX swaps (use opentrade-dex-swap), on-chain balances (use opentrade-portfolio), on-chain market data (use opentrade-market), token search (use opentrade-token), custodial wallet (use opentrade-wallet), or transaction broadcasting (use opentrade-gateway).

2026-05-105

opentrade-dex-swap.md

from "6551Team/opentrade"

This skill should be used when the user asks to 'swap tokens', 'trade OKB for USDC', 'buy tokens', 'sell tokens', 'exchange crypto', 'convert tokens', 'swap SOL for USDC', 'get a swap quote', 'execute a trade', 'find the best swap route', 'cheapest way to swap', 'optimal swap', 'compare swap rates', or mentions swapping, trading, buying, selling, or exchanging tokens on XLayer, Solana, Ethereum, Base, BSC, Arbitrum, Polygon, or any of 20+ supported chains. Aggregates liquidity from 500+ DEX sources for optimal routing and price. Supports slippage control, price impact protection, and cross-DEX route optimization. Do NOT use for general programming questions about swap code, or for analytical questions about historical swap volume.

2026-04-175

opentrade-gateway.md

from "6551Team/opentrade"

This skill should be used when the user asks to 'broadcast transaction', 'send tx', 'estimate gas', 'simulate transaction', 'check tx status', 'track my transaction', 'get gas price', 'gas limit', 'broadcast signed tx', or mentions broadcasting transactions, sending transactions on-chain, gas estimation, transaction simulation, tracking broadcast orders, or checking transaction status. Covers gas price, gas limit estimation, transaction simulation, transaction broadcasting, and order tracking across XLayer, Solana, Ethereum, Base, BSC, Arbitrum, Polygon, and 20+ other chains. Do NOT use for swap quote or execution — use opentrade-dex-swap instead. Do NOT use for general programming questions about transaction handling.

2026-04-175

opentrade-market.md

from "6551Team/opentrade"

Use this skill when users want live on-chain market data: token prices, price charts (K-line, OHLC), trade history, swap activity. Also, it covers on-chain signals — smart money, whale, and KOL wallet activity, large trades, and signal-supported chains. For meme tokens: scanning new launches, checking dev wallets, developer reputation, rug pull detection, rug pull history, tokens by same creator, detecting bundles or snipers, bonding curves %, flagging suspicious launches, and meme token safety checks. For token search, market cap, liquidity, trending tokens, or holder distribution, use opentrade-token instead.

2026-04-175

opentrade-portfolio.md

from "6551Team/opentrade"

This skill should be used when the user asks to 'check my wallet balance', 'show my token holdings', 'how much OKB do I have', 'what tokens do I have', 'check my portfolio value', 'view my assets', 'how much is my portfolio worth', 'what\'s in my wallet', or mentions checking wallet balance, total assets, token holdings, portfolio value, remaining funds, DeFi positions, or multi-chain balance lookup. Supports XLayer, Solana, Ethereum, Base, BSC, Arbitrum, Polygon, and 20+ other chains. Do NOT use for general programming questions about balance variables or API documentation. Do NOT use when the user is asking how to build or integrate a balance feature into code.

2026-04-175

opentrade-wallet.md

from "6551Team/opentrade"

This skill should be used when the user asks to 'create a custodial wallet', 'create a managed wallet', 'get my wallet address', 'show my custodial account', 'custodial swap', 'swap with managed wallet', 'withdraw from custodial wallet', 'withdraw BNB', 'withdraw SOL', 'send native tokens from custodial wallet', or mentions creating, managing, swapping, or withdrawing with a custodial (managed/hosted) wallet. Only supports BSC and Solana networks. Do NOT use for non-custodial wallet operations, general balance queries (use opentrade-portfolio), or swap quotes without custodial execution (use opentrade-dex-swap).

2026-04-175

package.json

"author": "6551Team"

"repository": "6551Team/opentrade"

Abrir repositório GitHub Ver repositórios do creator

$ install --global

$ download --local

Executar no Manus

$ useful --forSOC

Cientistas de dadosInformática e Matemática15-2051L4

name	opentrade-token
description	This skill should be used when the user asks to 'find a token', 'search for a token', 'look up PEPE', 'what's trending', 'top tokens', 'trending tokens on Solana', 'token rankings', 'who holds this token', 'holder distribution', 'token market cap', 'token liquidity', 'research a token', 'tell me about this token', 'token info', or mentions searching for tokens by name or address, discovering trending tokens, viewing token rankings, checking holder distribution, or analyzing token market cap and liquidity. Covers token search, metadata, market cap, liquidity, volume, trending token rankings, and holder analysis across XLayer, Solana, Ethereum, Base, BSC, Arbitrum, Polygon, and 20+ other chains. Do NOT use when the user says only a single generic word like 'tokens' or 'crypto' without specifying a token name, action, or question. For simple current price checks, price charts, candlestick data, or trade history, use opentrade-market instead. For meme token safety analysis, developer reputation, rug pull checks, bundle/sniper detection, or finding tokens by same creator, use opentrade-market instead.
license	Apache-2.0
metadata	{"author":6551,"version":"1.0.2","homepage":"https://www.newsliquid.com"}

OpenTrade DEX Token Info CLI

5 commands for token search, metadata, detailed pricing, rankings, and holder distribution.

Pre-flight Checks

Every time before running any opentrade command, always follow these steps in order. Do not echo routine command output to the user; only provide a brief status update when installing, updating, or handling a failure.

Confirm installed: Run which opentrade. If not found, install it:
```
curl -sSL https://raw.githubusercontent.com/6551Team/openskills/main/skills/opentrade/install.sh | sh
```
If the install script fails, ask the user to install manually following the instructions at: https://github.com/6551Team/openskills
Check for updates: Read ~/.opentrade/last_check and compare it with the current timestamp:
```
cached_ts=$(cat ~/.opentrade/last_check 2>/dev/null || true)
now=$(date +%s)
```
- If cached_ts is non-empty and (now - cached_ts) < 43200 (12 hours), skip the update and proceed.
- Otherwise (file missing or older than 12 hours), run the installer to check for updates:
```
curl -sSL https://raw.githubusercontent.com/6551Team/openskills/main/skills/opentrade/install.sh | sh
```
  If a newer version is installed, tell the user and suggest updating their opentrade skills from https://github.com/6551Team/openskills to get the latest features.
If any opentrade command fails with an unexpected error during this session, try reinstalling before giving up:
```
curl -sSL https://raw.githubusercontent.com/6551Team/openskills/main/skills/opentrade/install.sh | sh
```
Find or create a .env file in the project root to override the default API credentials, Load it before performing opentrade operations.

OPEN_TOKEN=your_token_here

Get your API token at: https://www.newsliquid.com/mcp

Security warning: Never commit .env to git (add it to .gitignore) and never expose credentials in logs, screenshots, or chat messages.

Router Discovery

IMPORTANT: If the user has not specified a trading router, you MUST first discover available routers:

opentrade trade routers

Response format:

{
  "ok": true,
  "data": [
    {
      "api": "v2",
      "created_at": "2026-03-10 01:15:42",
      "is_active": true,
      "name": "6551dex test",
      "quota_reward": 0,
      "trader": "6551dex",
      "updated_at": "2026-03-10 01:15:42"
    },
    {
      "api": "v1",
      "created_at": "2026-03-03 21:24:34",
      "is_active": true,
      "name": "okx test",
      "quota_reward": 0,
      "trader": "okx",
      "updated_at": "2026-03-03 21:24:34"
    }
  ]
}

Usage:

Extract trader and api from the response
MANDATORY: ALL subsequent opentrade commands in this session MUST include --trader <trader> and --api <api> flags
Example: opentrade token search USDC --chains ethereum --trader okx --api v1
Default fallback: If the API returns no data or is empty, use --trader okx --api v1

Skill Routing

For real-time prices / K-lines / trade history → use opentrade-market
For swap execution → use opentrade-dex-swap
For transaction broadcasting → use opentrade-gateway
For wallet balances / portfolio → use opentrade-portfolio
For meme token safety (dev reputation, rug pull, bundlers, similar tokens by same dev) → use opentrade-market
For smart money / whale / KOL signals → use opentrade-market

Quickstart

# Search token
opentrade token search xETH --chains "ethereum,solana"

# Get detailed price info
opentrade token price-info 0xe7b000003a45145decf8a28fc755ad5ec5ea025a --chain xlayer

# What's trending on Solana by volume?
opentrade token toplist --chains solana --sort-by 5 --time-frame 4

# Check holder distribution
opentrade token holders 0xeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee --chain xlayer

Chain Name Support

The CLI accepts human-readable chain names (e.g., ethereum, solana, xlayer) and resolves them automatically.

Chain	Name	chainIndex
XLayer	`xlayer`	`196`
Solana	`solana`	`501`
Ethereum	`ethereum`	`1`
Base	`base`	`8453`
BSC	`bsc`	`56`
Arbitrum	`arbitrum`	`42161`
Polygon	`polygon`	`137`
Optimism	`optimism`	`10`
Avalanche	`avalanche`	`43114`
Fantom	`fantom`	`250`
Cronos	`cronos`	`25`
Gnosis	`gnosis`	`100`
Klaytn	`klaytn`	`8217`
Aurora	`aurora`	`1313161554`
Harmony	`harmony`	`1666600000`
Moonbeam	`moonbeam`	`1284`
Moonriver	`moonriver`	`1285`
Celo	`celo`	`42220`
Fuse	`fuse`	`122`
OKC	`okc`	`66`
Heco	`heco`	`128`
Metis	`metis`	`1088`
Boba	`boba`	`288`
zkSync Era	`zksync`	`324`
Polygon zkEVM	`polygon-zkevm`	`1101`
Linea	`linea`	`59144`
Mantle	`mantle`	`5000`
Scroll	`scroll`	`534352`
Blast	`blast`	`81457`

Command Index

#	Command	Description
1	`opentrade token search <query>`	Search for tokens by name, symbol, or address
2	`opentrade token info <address>`	Get token basic info (name, symbol, decimals, logo)
3	`opentrade token price-info <address>`	Get detailed price info (price, market cap, liquidity, volume, 24h change)
4	`opentrade token toplist`	Get trending / top tokens
5	`opentrade token holders <address>`	Get token holder distribution (top 20)

Boundary: token vs market skill

Need	Use this skill (`opentrade-token`)	Use `opentrade-market` instead
Search token by name/symbol	`opentrade token search`	-
Token metadata (decimals, logo)	`opentrade token info`	-
Price + market cap + liquidity + multi-timeframe change	`opentrade token price-info`	-
Token ranking (trending)	`opentrade token toplist`	-
Holder distribution	`opentrade token holders`	-
Raw real-time price (single value)	-	`opentrade market price`
K-line / candlestick chart	-	`opentrade market kline`
Trade history (buy/sell log)	-	`opentrade market trades`
Index price (multi-source aggregate)	-	`opentrade market index`
Meme token dev reputation / rug pull	-	`opentrade market memepump-token-dev-info`
Bundle/sniper detection	-	`opentrade market memepump-token-bundle-info`
Similar tokens by same creator	-	`opentrade market memepump-similar-tokens`

Rule of thumb: opentrade-token = token discovery & enriched analytics (search, trending, holders, market cap). opentrade-market = raw price feeds, charts, smart money signals & meme pump scanning (including dev reputation, rug pull checks, bundler analysis).

Cross-Skill Workflows

This skill is the typical entry point — users often start by searching/discovering tokens, then proceed to swap.

Workflow A: Search → Research → Buy

User: "Find BONK token, analyze it, then buy some"

1. opentrade-token    opentrade token search BONK --chains solana              → get tokenContractAddress, chain, price
       ↓ tokenContractAddress
2. opentrade-token    opentrade token price-info <address> --chain solana      → market cap, liquidity, volume24H, priceChange24H
3. opentrade-token    opentrade token holders <address> --chain solana         → top 20 holders distribution
4. opentrade-market   opentrade market kline <address> --chain solana --bar 1H → hourly price chart
       ↓ user decides to buy
5. opentrade-dex-swap opentrade swap quote --from ... --to <address> --amount ... --chain solana
6. opentrade-dex-swap opentrade swap swap --from ... --to <address> --amount ... --chain solana --wallet <addr>

Data handoff:

tokenContractAddress from step 1 → reused in all subsequent steps
chain from step 1 → reused in all subsequent steps
decimal from step 1 or opentrade token info → needed for minimal unit conversion in swap

Workflow B: Discover Trending → Investigate → Trade

User: "What's trending on Solana?"

1. opentrade-token    opentrade token toplist --chains solana --sort-by 5 --time-frame 4  → top tokens by 24h volume
       ↓ user picks a token
2. opentrade-token    opentrade token price-info <address> --chain solana                  → detailed analytics
3. opentrade-token    opentrade token holders <address> --chain solana                     → check if whale-dominated
4. opentrade-market   opentrade market kline <address> --chain solana                      → K-line for visual trend
       ↓ user decides to trade
5. opentrade-dex-swap opentrade swap swap --from ... --to ... --amount ... --chain solana --wallet <addr>

Workflow C: Token Verification Before Swap

Before swapping an unknown token, always verify:

1. opentrade-token    opentrade token search <name>                            → find token
2. Check communityRecognized:
   - true → proceed with normal caution
   - false → warn user about risk
3. opentrade-token    opentrade token price-info <address> → check liquidity:
   - liquidity < $10K → warn about high slippage risk
   - liquidity < $1K → strongly discourage trade
4. opentrade-dex-swap opentrade swap quote ... → check isHoneyPot and taxRate
5. If all checks pass → proceed to swap

Operation Flow

Step 1: Identify Intent

Search for a token → opentrade token search
Get token metadata → opentrade token info
Get price + market cap + liquidity → opentrade token price-info
View rankings → opentrade token toplist
View holder distribution → opentrade token holders

Step 2: Collect Parameters

Missing chain → recommend XLayer (--chain xlayer, low gas, fast confirmation) as the default, then ask which chain the user prefers
Only have token name, no address → use opentrade token search first
For search, --chains defaults to "1,501" (Ethereum + Solana)
For toplist, --sort-by defaults to 5 (volume), --time-frame defaults to 4 (24h)

Step 3: Call and Display

Search results: show name, symbol, chain, price, 24h change
Indicate communityRecognized status for trust signaling
Price info: show market cap, liquidity, and volume together

Step 4: Suggest Next Steps

After displaying results, suggest 2-3 relevant follow-up actions based on the command just executed:

Just called	Suggest
`token search`	1. View detailed analytics (market cap, liquidity) → `opentrade token price-info` (this skill) 2. View price chart → `opentrade-market` 3. Buy/swap this token → `opentrade-dex-swap`
`token info`	1. View price and market data → `opentrade token price-info` (this skill) 2. Check holder distribution → `opentrade token holders` (this skill)
`token price-info`	1. View K-line chart → `opentrade-market` 2. Check holder distribution → `opentrade token holders` (this skill) 3. Buy/swap this token → `opentrade-dex-swap`
`token toplist`	1. View details for a specific token → `opentrade token price-info` (this skill) 2. View price chart → `opentrade-market` 3. Buy a trending token → `opentrade-dex-swap`
`token holders`	1. View price trend → `opentrade-market` 2. Buy/swap this token → `opentrade-dex-swap`

Present conversationally, e.g.: "Would you like to see the price chart or check the holder distribution?" — never expose skill names or endpoint paths to the user.

CLI Command Reference

1. opentrade token search

Search for tokens by name, symbol, or contract address.

opentrade token search <query> [--chains <chains>]

Param	Required	Default	Description
`<query>`	Yes	-	Keyword: token name, symbol, or contract address (positional)
`--chains`	No	`"1,501"`	Chain names or IDs, comma-separated (e.g., `"ethereum,solana"` or `"196,501"`)

Return fields:

Field	Type	Description
`tokenContractAddress`	String	Token contract address
`tokenSymbol`	String	Token symbol (e.g., `"ETH"`)
`tokenName`	String	Token full name
`tokenLogoUrl`	String	Token logo image URL
`chainIndex`	String	Chain identifier
`decimal`	String	Token decimals (e.g., `"18"`)
`price`	String	Current price in USD
`change`	String	24-hour price change percentage
`marketCap`	String	Market capitalization in USD
`liquidity`	String	Liquidity in USD
`holders`	String	Number of token holders
`explorerUrl`	String	Block explorer URL for the token
`tagList.communityRecognized`	Boolean	`true` = listed on Top 10 CEX or community verified

2. opentrade token info

Get token basic info (name, symbol, decimals, logo).

opentrade token info <address> [--chain <chain>]

Param	Required	Default	Description
`<address>`	Yes	-	Token contract address (positional)
`--chain`	No	`ethereum`	Chain name

Return fields:

Field	Type	Description
`tokenContractAddress`	String	Contract address
`tokenSymbol`	String	Token symbol
`tokenName`	String	Full name
`chainIndex`	String	Chain identifier
`decimal`	String	Token decimals
`totalSupply`	String	Total supply
`logoUrl`	String	Token logo URL
`websiteUrl`	String	Official website
`twitterUrl`	String	Twitter/X profile
`telegramUrl`	String	Telegram group
`discordUrl`	String	Discord server
`communityRecognized`	Boolean	Verification status

3. opentrade token price-info

Get detailed price, market cap, liquidity, volume, and multi-timeframe changes.

opentrade token price-info <address> [--chain <chain>]

Param	Required	Default	Description
`<address>`	Yes	-	Token contract address (positional)
`--chain`	No	`ethereum`	Chain name

Return fields:

Field	Type	Description
`price`	String	Current price in USD
`priceChange1h`	String	1h price change %
`priceChange4h`	String	4h price change %
`priceChange12h`	String	12h price change %
`priceChange24h`	String	24h price change %
`volume24h`	String	24h trading volume
`liquidity`	String	Total liquidity in USD
`liquidityChange24h`	String	24h liquidity change %
`marketCap`	String	Market capitalization
`fullyDilutedValuation`	String	FDV
`holders`	String	Number of token holders
`transactions24h`	String	24h transaction count
`buys24h`	String	24h buy count
`sells24h`	String	24h sell count

4. opentrade token toplist

Get trending / top tokens by various metrics.

opentrade token toplist [--chains <chains>] [--sort-by <n>] [--time-frame <n>]

Param	Required	Default	Description
`--chains`	No	`"1,501"`	Chain names or IDs, comma-separated
`--sort-by`	No	`5`	Sort metric: `2` = price change, `5` = volume, `6` = market cap
`--time-frame`	No	`4`	Time window: `1` = 5min, `2` = 1h, `3` = 4h, `4` = 24h

Return fields (array of tokens):

Field	Type	Description
`tokenContractAddress`	String	Token contract address
`tokenSymbol`	String	Token symbol
`chainIndex`	String	Chain identifier
`price`	String	Current price
`change`	String	Price change % for selected time frame
`volume`	String	Volume for selected time frame
`marketCap`	String	Market capitalization
`liquidity`	String	Liquidity in USD

5. opentrade token holders

Get token holder distribution (top 20).

opentrade token holders <address> [--chain <chain>]

Param	Required	Default	Description
`<address>`	Yes	-	Token contract address (positional)
`--chain`	No	`ethereum`	Chain name

Return fields (top 20 holders):

Field	Type	Description
`data[].holdAmount`	String	Token amount held
`data[].holderWalletAddress`	String	Holder wallet address

Input / Output Examples

User says: "Search for xETH token on XLayer"

opentrade token search xETH --chains xlayer
# → Display:
#   xETH (0xe7b0...) - XLayer
#   Price: $X,XXX.XX | 24h: +X% | Market Cap: $XXM | Liquidity: $XXM
#   Community Recognized: Yes

User says: "What's trending on Solana by volume?"

opentrade token toplist --chains solana --sort-by 5 --time-frame 4
# → Display top tokens sorted by 24h volume:
#   #1 SOL  - Vol: $1.2B | Change: +3.5% | MC: $80B
#   #2 BONK - Vol: $450M | Change: +12.8% | MC: $1.5B
#   ...

User says: "Who are the top holders of this token?"

opentrade token holders 0xeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee --chain xlayer
# → Display top 20 holders with amounts and addresses

Edge Cases

Token not found: suggest verifying the contract address (symbols can collide)
Same symbol on multiple chains: show all matches with chain names
Unverified token: communityRecognized = false — warn user about risk
Too many results: name/symbol search caps at 100 — suggest using exact contract address
Network error: retry once
Region restriction (error code 50125 or 80001): do NOT show the raw error code to the user. Instead, display a friendly message: ⚠️ Service is not available in your region. Please switch to a supported region and try again.

Amount Display Rules

Use appropriate precision: 2 decimals for high-value, significant digits for low-value
Market cap / liquidity in shorthand ($1.2B, $45M)
24h change with sign and color hint (+X% / -X%)

Global Notes

Use contract address as primary identity — symbols can collide across tokens
communityRecognized = true means listed on Top 10 CEX or community verified
The CLI resolves chain names automatically (e.g., ethereum → 1, solana → 501)
EVM addresses must be all lowercase
The CLI handles authentication internally via environment variables — see Pre-flight Checks step 4 for authentication setup
Get your API token at https://www.newsliquid.com/mcp

opentrade-token

Mais deste repositório

Mais deste repositório

OpenTrade DEX Token Info CLI

Pre-flight Checks

Router Discovery

Skill Routing

Quickstart

Chain Name Support

Command Index

Boundary: token vs market skill

Cross-Skill Workflows

Workflow A: Search → Research → Buy

Workflow B: Discover Trending → Investigate → Trade

Workflow C: Token Verification Before Swap

Operation Flow

Step 1: Identify Intent

Step 2: Collect Parameters

Step 3: Call and Display

Step 4: Suggest Next Steps

CLI Command Reference

1. opentrade token search

2. opentrade token info

3. opentrade token price-info

4. opentrade token toplist

5. opentrade token holders

Input / Output Examples

Edge Cases

Amount Display Rules

Global Notes

OpenTrade DEX Token Info CLI

Pre-flight Checks

Router Discovery

Skill Routing

Quickstart

Chain Name Support

Command Index

Boundary: token vs market skill

Cross-Skill Workflows

Workflow A: Search → Research → Buy

Workflow B: Discover Trending → Investigate → Trade

Workflow C: Token Verification Before Swap

Operation Flow

Step 1: Identify Intent

Step 2: Collect Parameters

Step 3: Call and Display

Step 4: Suggest Next Steps

CLI Command Reference

1. opentrade token search

2. opentrade token info

3. opentrade token price-info

4. opentrade token toplist

5. opentrade token holders

Input / Output Examples

Edge Cases

Amount Display Rules

Global Notes