signoz-modifying-dashboards

name

signoz-modifying-dashboards

description

Modify an existing SigNoz dashboard — add or remove panels, edit a panel's query, threshold, or unit, rename the dashboard, change a panel type (graph ↔ table ↔ value), rearrange the layout, add or edit variables, or update tags. Make sure to use this skill whenever the user says "add a panel to my dashboard", "change the query on this panel", "remove the latency widget", "rename my dashboard", "update the filters", "rearrange the layout", "add a variable", "change panel type from graph to table", or otherwise asks to change something on a dashboard that already exists — even if they don't say "modify" or "edit" explicitly.

Dashboard Modify

Prerequisites

This skill calls SigNoz MCP server tools (signoz:signoz_get_dashboard, signoz:signoz_update_dashboard, signoz:signoz_list_dashboards, signoz:signoz_list_metrics). Before running the workflow, confirm the signoz:signoz_* tools are available. If they are not, the SigNoz MCP server is not installed or configured — run signoz-mcp-setup first to initialize or repair the MCP connection. Do not fall back to raw HTTP calls or hand-edit dashboard JSON without the MCP tools.

When to use

Use this skill when the user asks to:

• Add, remove, or edit panels/widgets on an existing dashboard
• Change a panel's query, title, type, or display settings
• Add, remove, or edit dashboard variables
• Rename or re-describe a dashboard
• Rearrange panel layout or resize panels
• Change a panel type (e.g., graph to table, value to graph)
• Add or modify thresholds on a panel
• Update tags on a dashboard

Do NOT use when:

• User wants to understand what a dashboard shows → signoz-explaining-dashboards

Instructions

Step 1: Identify the target dashboard

Determine which dashboard the user wants to modify. If the user provides a dashboard name, UUID, or it is clear from context (e.g., an @mention or auto-context providing a dashboard resource), use that.

If the target dashboard is ambiguous:

1. Call signoz:signoz_list_dashboards to list existing dashboards. Paginate through all pages — check pagination.hasMore in the response. If hasMore is true, call again with offset set to pagination.nextOffset and repeat until all pages are exhausted. Never stop at the first page.
2. Present matching candidates to the user and ask which one to modify.

Step 2: Fetch the current dashboard state

Call signoz:signoz_get_dashboard with the dashboard UUID to retrieve its full configuration. This is mandatory — signoz:signoz_update_dashboard requires the complete post-update state, not a partial patch. Never skip this step.

Examine the response to understand:

• Current widgets and their IDs
• Current layout positions (x, y, w, h in the 12-column grid)
• Current variables
• Current queries on each panel
• The panelMap structure (row-to-child mappings)

Step 3: Plan the modification

Based on the user's request, plan the changes.

Confirm with the user before applying if:

• The modification is destructive — removing panels, deleting variables, replacing an entire query with a different one, changing a panel's dataSource (e.g., traces → logs), or fundamentally altering what data is shown (changing aggregation from p99 to avg, removing groupBy dimensions)
• The request is ambiguous — multiple panels could match "the latency panel"
• The change is large — restructuring sections, adding many panels at once

Destructive means data loss or silent behavior change. Even if the user says "just do it quickly," a brief confirmation ("I'll remove 'Memory Fragmentation' permanently — OK?") takes seconds and prevents irreversible mistakes. User urgency does not override this guardrail.

Non-destructive changes proceed directly: renaming, adding a single panel, changing a unit, adding a variable, changing panel type (the query is preserved), adjusting layout, adding thresholds.

Compound modifications: When a request involves multiple changes (e.g., remove a panel + add a panel + rename), plan all changes against the fetched state and apply them as a single update. Do not apply and re-fetch between changes.

Step 4: Apply the modification

Merge the planned changes into the full dashboard JSON from Step 2.

Modification rules:

• Preserve everything you are not changing. Copy the entire dashboard object and only modify the specific fields the user asked about. Do not drop widgets, variables, layout items, or panelMap entries that are not part of the change.

• Adding a panel:

  1. Create a new widget with a UUID for its id (use crypto.randomUUID() format).
  2. Include all required widget fields: id, title, description, panelTypes, query, opacity ("1"), nullZeroValues ("zero"), timePreferance ("GLOBAL_TIME" — note the deliberate misspelling), stepSize (60), yAxisUnit, isStacked (false), fillSpans (false), isLogScale (false), mergeAllActiveQueries (false), thresholds ([]), softMin (0), softMax (0), legendPosition ("bottom"), columnUnits ({}), customLegendColors ({}), selectedLogFields ([]), selectedTracesFields ([]), contextLinks ({"linksData": []}).
  3. Add a layout entry with i matching the widget ID, and appropriate x, y, w, h values in the 12-column grid.
  4. If the dashboard uses rows, add the panel's layout to the appropriate row's panelMap[rowId].widgets array. If the dashboard has no rows (empty panelMap), skip panelMap — the panel lives at the top level.
  5. For query construction, read the signoz://dashboard/query-builder-example MCP resource for the v5 builder query format. Use the signal-specific resources as needed (signoz://dashboard/promql-example, signoz://dashboard/clickhouse-*, signoz://traces/query-builder-guide).
  6. All modified panels are validated below as a hard requirement — see the "Dry-run modified panels" step before signoz:signoz_update_dashboard and the "Mandatory dry-run before update" guardrail. Author the JSON here as you intend to save it — the dry-run uses the exact shape from queryData.

• Removing a panel: Remove the widget from widgets, its entry from layout, and its entry from the parent row's panelMap.widgets (if it exists in panelMap). Do not try to auto-compact or shift y positions of remaining panels — the SigNoz frontend grid engine handles gap-closing automatically. Simply remove the three references (widget, layout, panelMap entry) and leave all other positions unchanged.

• Editing a panel's query: Replace the query object on the target widget. Keep all other widget fields intact. If the user is changing what the panel measures (not just renaming a label), the new query is validated by the mandatory dry-run step below (and the "Mandatory dry-run before update" guardrail) — replacing a working query with a broken one is a destructive change the user will only notice after the panel goes empty.

• Changing panel type: Update panelTypes and handle type-specific fields:

  • graph → table: add columnUnits ({}) and columnWidths ({}) if missing. Graph-only fields like isStacked, fillSpans, isLogScale become inert but are harmless to leave.
  • graph/table → histogram: add bucketCount (30) and bucketWidth (0).
  • Any → list (logs): add selectedLogFields array.
  • Any → list (traces): add selectedTracesFields array.
  • Keep the existing query intact — the data source and query are independent of the visualization type.

• Adding/editing variables: Add or update entries in the variables map. Use OTel attribute names for the underlying attribute (e.g., service.name, deployment.environment.name). Use DYNAMIC type when the values come from a standard telemetry attribute. Each variable needs a UUID for id and key.

• Rearranging layout / side-by-side placement:

  • Dashboard uses a 12-column grid. x ranges 0–11, w ranges 1–12.
  • Two panels side-by-side: each gets w: 6, first at x: 0, second at x: 6, same y and h.
  • Three panels in a row: w: 4 at x: 0, x: 4, x: 8.
  • When resizing an existing panel to make room, update its w and x, then place the new panel in the freed space at the same y.
  • Common heights: h: 6 for graphs/tables, h: 2–h: 3 for value panels, h: 1 for row headers.
  • Keep panelMap in sync: whenever you change x, y, w, or h in the top-level layout array, apply the same change to the matching entry in panelMap[rowId].widgets. These are duplicated and must stay consistent.

Dry-run modified panels (mandatory). Before signoz:signoz_update_dashboard, call signoz:signoz_execute_builder_query for each modified panel. Translate the widget's builder.queryData[] / queryFormulas[] into the endpoint's queries[].{type, spec} envelope: each queryData[i] → { type: "builder_query", spec: { name, signal, filter: {expression}, groupBy, aggregations } }; each queryFormulas[i] → { type: "builder_formula", spec: { name, expression } }. Preserve the original name (A, B, …) on every builder_query.spec — formula expressions reference inputs by that name (e.g., A * 100 / B), and dropping it makes the dry-run diverge from the saved panel. The endpoint cannot consume widget JSON directly. See the "Mandatory dry-run before update" guardrail for the conditions, the bool-filter footgun, and why this catches what the JSON diff cannot. Server error or unexpected empty result = fix the panel JSON before update.

Call signoz:signoz_update_dashboard with the dashboard UUID and the complete modified dashboard JSON.

Step 5: Report the result

Briefly tell the user what was changed. Offer further modifications if relevant.

Guardrails

• Full state on update: signoz:signoz_update_dashboard requires the complete dashboard JSON (not a partial patch). Always call signoz:signoz_get_dashboard first to get the current state, merge your changes into that full object, and pass the result to signoz:signoz_update_dashboard. Never construct an update payload from scratch.
• Preserve what you don't change: Never drop or overwrite widgets, variables, layout items, or panelMap entries that are outside the scope of the user's request. Diff-and-merge, do not rebuild.
• Confirm destructive changes: Before removing panels, replacing queries, or deleting variables, confirm with the user — even if they say "just do it" or express urgency. Additions, renames, type changes, and variable additions do not need confirmation.
• Mandatory dry-run before update. For every added or edited query-bearing panel, run signoz:signoz_execute_builder_query before signoz:signoz_update_dashboard (envelope translation in the Dry-run step above). Row / header panels (panelTypes: "row") have no query — validate their shape against signoz://dashboard/widgets-examples instead. Modifications are especially prone to silent regression because the panel worked before the edit — a saved empty panel from a typo'd rename or attribute swap is the worst failure mode for this skill.
• Valid JSON only: Follow the v5 schema documented in the signoz://dashboard/* MCP resources (instructions, widgets-instructions, widgets-examples, query-builder-example). Include all required widget fields (see "Adding a panel" above). Never generate malformed queries or layouts.
• OTel attribute names: Always use OpenTelemetry semantic conventions for attribute names in filters, groupBy, and variables. Use service.name not service, host.name not host, deployment.environment.name not env.
• No metric guessing: If adding or changing queries and you are not sure what metrics are available, ask the user or call signoz:signoz_list_metrics to discover available metrics. Wrong metric names produce empty panels.
• Paginate dashboard listing: When searching for a dashboard by name, always paginate through all pages of signoz:signoz_list_dashboards before concluding a dashboard does not exist.
• UUIDs for new objects: Every new widget, layout item, variable, and query needs a unique UUID (crypto.randomUUID() format). Never use sequential IDs or short strings.
• Scope boundary: This skill modifies existing dashboards. To create a new dashboard from scratch, point the user at the SigNoz dashboard editor in the UI — there is no creation skill in this plugin yet.

Examples

User: "Add an error rate panel to my Redis dashboard"

Agent:

1. Calls signoz:signoz_list_dashboards (paginates all pages) — finds "Redis Overview" dashboard with UUID abc-123.
2. Calls signoz:signoz_get_dashboard with UUID abc-123 — gets full configuration with 8 existing panels.
3. Calls signoz:signoz_list_metrics to find available Redis error metrics.
4. Creates a new graph widget (with UUID, all required fields, and a formula query for error rate), adds a layout entry at the next available y position, and adds it to the appropriate row's panelMap.
5. Calls signoz:signoz_update_dashboard with the full modified JSON (all 9 panels).
6. Reports: "Added an 'Error Rate' graph panel to your Redis Overview dashboard under the Overview section. Want me to adjust anything?"

---

User: "Change the latency panel from a graph to a table on my API dashboard"

Agent:

1. Identifies "API Monitoring" dashboard from context, calls signoz:signoz_get_dashboard.
2. Finds the panel titled "Request Latency" — if multiple panels could match, confirms with user: "I found 'Request Latency'. Convert that one to a table?"
3. Changes panelTypes from "graph" to "table", adds columnUnits and columnWidths if missing, keeps the query intact.
4. Calls signoz:signoz_update_dashboard with the full modified JSON (all panels preserved).
5. Reports: "Changed 'Request Latency' from a graph to a table. Want me to adjust column widths or add column units?"

---

User: "Remove the CPU panel and rename the dashboard to 'Service Health'"

Agent:

1. Fetches the dashboard via signoz:signoz_get_dashboard.
2. Finds the "CPU Usage" panel. Confirms: "I'll remove the 'CPU Usage' panel and rename the dashboard to 'Service Health'. Proceed?" (Removal is destructive — always confirm.)
3. User confirms.
4. Removes the widget from widgets, its layout entry, and its panelMap reference. Leaves all other panel positions unchanged (the frontend grid closes gaps automatically). Updates title and name to "Service Health".
5. Calls signoz:signoz_update_dashboard with the full modified JSON.
6. Reports: "Removed the 'CPU Usage' panel and renamed the dashboard to 'Service Health'. Anything else to adjust?"