Run any Skill in Manus with one click

$pwd:

opentrade-portfolio

Name: Opentrade Portfolio
Author: 6551Team

// This skill should be used when the user asks to 'check my wallet balance', 'show my token holdings', 'how much OKB do I have', 'what tokens do I have', 'check my portfolio value', 'view my assets', 'how much is my portfolio worth', 'what\'s in my wallet', or mentions checking wallet balance, total assets, token holdings, portfolio value, remaining funds, DeFi positions, or multi-chain balance lookup. Supports XLayer, Solana, Ethereum, Base, BSC, Arbitrum, Polygon, and 20+ other chains. Do NOT use for general programming questions about balance variables or API documentation. Do NOT use when the user is asking how to build or integrate a balance feature into code.

Run Skill in Manus

$ git log --oneline --stat

stars:5

forks:0

updated:April 17, 2026 at 20:07

SKILL.md

readonly

related-skills.json

same repository

opentrade-cex.md

from "6551Team/opentrade"

This skill should be used when the user asks to 'place a CEX order', 'trade on centralized exchange', 'buy BTC on CEX', 'sell ETH futures', 'open a long position', 'open a short position', 'close my position', 'set leverage', 'check my CEX balance', 'show my open orders', 'cancel my order', 'check CEX ticker', 'get K-line data', 'set margin mode', 'check my CEX positions', 'view trade history', 'check funding rate', 'get order book', 'check open interest', 'compare funding rates', or mentions CEX trading, futures, contracts, leverage, margin, limit orders, market orders, stop-loss, take-profit, funding rate, order book, open interest. This is for centralized exchange operations only. Do NOT use for DEX swaps (use opentrade-dex-swap), on-chain balances (use opentrade-portfolio), on-chain market data (use opentrade-market), token search (use opentrade-token), custodial wallet (use opentrade-wallet), or transaction broadcasting (use opentrade-gateway).

2026-05-105

opentrade-dex-swap.md

from "6551Team/opentrade"

This skill should be used when the user asks to 'swap tokens', 'trade OKB for USDC', 'buy tokens', 'sell tokens', 'exchange crypto', 'convert tokens', 'swap SOL for USDC', 'get a swap quote', 'execute a trade', 'find the best swap route', 'cheapest way to swap', 'optimal swap', 'compare swap rates', or mentions swapping, trading, buying, selling, or exchanging tokens on XLayer, Solana, Ethereum, Base, BSC, Arbitrum, Polygon, or any of 20+ supported chains. Aggregates liquidity from 500+ DEX sources for optimal routing and price. Supports slippage control, price impact protection, and cross-DEX route optimization. Do NOT use for general programming questions about swap code, or for analytical questions about historical swap volume.

2026-04-175

opentrade-gateway.md

from "6551Team/opentrade"

This skill should be used when the user asks to 'broadcast transaction', 'send tx', 'estimate gas', 'simulate transaction', 'check tx status', 'track my transaction', 'get gas price', 'gas limit', 'broadcast signed tx', or mentions broadcasting transactions, sending transactions on-chain, gas estimation, transaction simulation, tracking broadcast orders, or checking transaction status. Covers gas price, gas limit estimation, transaction simulation, transaction broadcasting, and order tracking across XLayer, Solana, Ethereum, Base, BSC, Arbitrum, Polygon, and 20+ other chains. Do NOT use for swap quote or execution — use opentrade-dex-swap instead. Do NOT use for general programming questions about transaction handling.

2026-04-175

opentrade-market.md

from "6551Team/opentrade"

Use this skill when users want live on-chain market data: token prices, price charts (K-line, OHLC), trade history, swap activity. Also, it covers on-chain signals — smart money, whale, and KOL wallet activity, large trades, and signal-supported chains. For meme tokens: scanning new launches, checking dev wallets, developer reputation, rug pull detection, rug pull history, tokens by same creator, detecting bundles or snipers, bonding curves %, flagging suspicious launches, and meme token safety checks. For token search, market cap, liquidity, trending tokens, or holder distribution, use opentrade-token instead.

2026-04-175

opentrade-token.md

from "6551Team/opentrade"

This skill should be used when the user asks to 'find a token', 'search for a token', 'look up PEPE', 'what's trending', 'top tokens', 'trending tokens on Solana', 'token rankings', 'who holds this token', 'holder distribution', 'token market cap', 'token liquidity', 'research a token', 'tell me about this token', 'token info', or mentions searching for tokens by name or address, discovering trending tokens, viewing token rankings, checking holder distribution, or analyzing token market cap and liquidity. Covers token search, metadata, market cap, liquidity, volume, trending token rankings, and holder analysis across XLayer, Solana, Ethereum, Base, BSC, Arbitrum, Polygon, and 20+ other chains. Do NOT use when the user says only a single generic word like 'tokens' or 'crypto' without specifying a token name, action, or question. For simple current price checks, price charts, candlestick data, or trade history, use opentrade-market instead. For meme token safety analysis, developer reputation, rug pull checks,

2026-04-175

opentrade-wallet.md

from "6551Team/opentrade"

This skill should be used when the user asks to 'create a custodial wallet', 'create a managed wallet', 'get my wallet address', 'show my custodial account', 'custodial swap', 'swap with managed wallet', 'withdraw from custodial wallet', 'withdraw BNB', 'withdraw SOL', 'send native tokens from custodial wallet', or mentions creating, managing, swapping, or withdrawing with a custodial (managed/hosted) wallet. Only supports BSC and Solana networks. Do NOT use for non-custodial wallet operations, general balance queries (use opentrade-portfolio), or swap quotes without custodial execution (use opentrade-dex-swap).

2026-04-175

package.json

"author": "6551Team"

"repository": "6551Team/opentrade"

View GitHub Repository View Creator Repositories

$ install --global

$ download --local

Run Skill in Manus

$ useful --forSOC

Brokerage ClerksOffice and Administrative Support Occupations43-4011L4

name	opentrade-portfolio
description	This skill should be used when the user asks to 'check my wallet balance', 'show my token holdings', 'how much OKB do I have', 'what tokens do I have', 'check my portfolio value', 'view my assets', 'how much is my portfolio worth', 'what\'s in my wallet', or mentions checking wallet balance, total assets, token holdings, portfolio value, remaining funds, DeFi positions, or multi-chain balance lookup. Supports XLayer, Solana, Ethereum, Base, BSC, Arbitrum, Polygon, and 20+ other chains. Do NOT use for general programming questions about balance variables or API documentation. Do NOT use when the user is asking how to build or integrate a balance feature into code.
license	Apache-2.0
metadata	{"author":6551,"version":"1.0.2","homepage":"https://www.newsliquid.com"}

OpenTrade Wallet Portfolio CLI

4 commands for supported chains, wallet total value, all token balances, and specific token balances.

Pre-flight Checks

Every time before running any opentrade command, always follow these steps in order. Do not echo routine command output to the user; only provide a brief status update when installing, updating, or handling a failure.

Confirm installed: Run which opentrade. If not found, install it:
```
curl -sSL https://raw.githubusercontent.com/6551Team/openskills/main/skills/opentrade/install.sh | sh
```
If the install script fails, ask the user to install manually following the instructions at: https://github.com/6551Team/openskills
Check for updates: Read ~/.opentrade/last_check and compare it with the current timestamp:
```
cached_ts=$(cat ~/.opentrade/last_check 2>/dev/null || true)
now=$(date +%s)
```
- If cached_ts is non-empty and (now - cached_ts) < 43200 (12 hours), skip the update and proceed.
- Otherwise (file missing or older than 12 hours), run the installer to check for updates:
```
curl -sSL https://raw.githubusercontent.com/6551Team/openskills/main/skills/opentrade/install.sh | sh
```
  If a newer version is installed, tell the user and suggest updating their opentrade skills from https://github.com/6551Team/openskills to get the latest features.
If any opentrade command fails with an unexpected error during this session, try reinstalling before giving up:
```
curl -sSL https://raw.githubusercontent.com/6551Team/openskills/main/skills/opentrade/install.sh | sh
```
Find or create a .env file in the project root to override the default API credentials, Load it before performing opentrade operations.

OPEN_TOKEN=your_token_here

Get your API token at: https://www.newsliquid.com/mcp

Security warning: Never commit .env to git (add it to .gitignore) and never expose credentials in logs, screenshots, or chat messages.

Router Discovery

IMPORTANT: If the user has not specified a trading router, you MUST first discover available routers:

opentrade trade routers

Response format:

{
  "ok": true,
  "data": [
    {
      "api": "v2",
      "created_at": "2026-03-10 01:15:42",
      "is_active": true,
      "name": "6551dex test",
      "quota_reward": 0,
      "trader": "6551dex",
      "updated_at": "2026-03-10 01:15:42"
    },
    {
      "api": "v1",
      "created_at": "2026-03-03 21:24:34",
      "is_active": true,
      "name": "okx test",
      "quota_reward": 0,
      "trader": "okx",
      "updated_at": "2026-03-03 21:24:34"
    }
  ]
}

Usage:

Extract trader and api from the response
MANDATORY: ALL subsequent opentrade commands in this session MUST include --trader <trader> and --api <api> flags
Example: opentrade portfolio balance 0x... --chain ethereum --trader okx --api v1
Default fallback: If the API returns no data or is empty, use --trader okx --api v1

Skill Routing

For token prices / K-lines → use opentrade-market
For token search / metadata → use opentrade-token
For swap execution → use opentrade-dex-swap
For transaction broadcasting → use opentrade-gateway

Quickstart

# Get supported chains for balance queries
opentrade portfolio chains

# Get total asset value on XLayer and Solana
opentrade portfolio total-value --address 0xYourWallet --chains "xlayer,solana"

# Get all token balances
opentrade portfolio all-balances --address 0xYourWallet --chains "xlayer,solana,ethereum"

# Check specific tokens (native OKB + USDC on XLayer)
opentrade portfolio token-balances --address 0xYourWallet --tokens "196:,196:0x74b7f16337b8972027f6196a17a631ac6de26d22"

Chain Name Support

The CLI accepts human-readable chain names and resolves them automatically.

Chain	Name	chainIndex
XLayer	`xlayer`	`196`
Solana	`solana`	`501`
Ethereum	`ethereum`	`1`
Base	`base`	`8453`
BSC	`bsc`	`56`
Arbitrum	`arbitrum`	`42161`

Address format note: EVM addresses (0x...) work across Ethereum/BSC/Polygon/Arbitrum/Base etc. Solana addresses (Base58) and Bitcoin addresses (UTXO) have different formats. Do NOT mix formats across chain types.

Command Index

#	Command	Description
1	`opentrade portfolio chains`	Get supported chains for balance queries
2	`opentrade portfolio total-value --address ... --chains ...`	Get total asset value for a wallet
3	`opentrade portfolio all-balances --address ... --chains ...`	Get all token balances for a wallet
4	`opentrade portfolio token-balances --address ... --tokens ...`	Get specific token balances

Cross-Skill Workflows

This skill is often used before swap (to verify sufficient balance) or as portfolio entry point.

Workflow A: Pre-Swap Balance Check

User: "Swap 1 SOL for BONK"

1. opentrade-token    opentrade token search BONK --chains solana               → get tokenContractAddress
       ↓ tokenContractAddress
2. opentrade-portfolio  opentrade portfolio all-balances --address <addr> --chains solana
       → verify SOL balance >= 1
       ↓ balance field (UI units) → convert to minimal units for swap
3. opentrade-dex-swap     opentrade swap quote --from 11111111111111111111111111111111 --to <BONK_address> --amount 1000000000 --chain solana
4. opentrade-dex-swap     opentrade swap swap --from ... --to <BONK_address> --amount 1000000000 --chain solana --wallet <addr>

Data handoff:

tokenContractAddress from token search → feeds into swap --from / --to
balance from portfolio is UI units; swap needs minimal units → multiply by 10^decimal
If balance < required amount → inform user, do NOT proceed to swap

Workflow B: Portfolio Overview + Analysis

User: "Show my portfolio"

1. opentrade-portfolio  opentrade portfolio total-value --address <addr> --chains "xlayer,solana,ethereum"
       → total USD value
2. opentrade-portfolio  opentrade portfolio all-balances --address <addr> --chains "xlayer,solana,ethereum"
       → per-token breakdown
       ↓ top holdings by USD value
3. opentrade-token    opentrade token price-info <address> --chain <chain>  → enrich with 24h change, market cap
4. opentrade-market   opentrade market kline <address> --chain <chain>      → price charts for tokens of interest

Workflow C: Sell Underperforming Tokens

1. opentrade-portfolio  opentrade portfolio all-balances --address <addr> --chains "xlayer,solana,ethereum"
       → list all holdings
       ↓ tokenContractAddress + chainIndex for each
2. opentrade-token    opentrade token price-info <address> --chain <chain>  → get priceChange24H per token
3. Filter by negative change → user confirms which to sell
4. opentrade-dex-swap     opentrade swap quote → opentrade swap swap → execute sell

Key conversion: balance (UI units) × 10^decimal = amount (minimal units) for swap.

Operation Flow

Step 1: Identify Intent

Check total assets → opentrade portfolio total-value
View all token holdings → opentrade portfolio all-balances
Check specific token balance → opentrade portfolio token-balances
Unsure which chains are supported → opentrade portfolio chains first

Step 2: Collect Parameters

Missing wallet address → ask user
Missing target chains → recommend XLayer (--chains xlayer, low gas, fast confirmation) as the default, then ask which chain the user prefers. Common set: "xlayer,solana,ethereum,base,bsc"
Need to filter risky tokens → set --exclude-risk 0 (only works on ETH/BSC/SOL/BASE)

Step 3: Call and Display

Total value: display USD amount
Token balances: show token name, amount (UI units), USD value
Sort by USD value descending

Step 4: Suggest Next Steps

After displaying results, suggest 2-3 relevant follow-up actions:

Just completed	Suggest
`portfolio total-value`	1. View token-level breakdown → `opentrade portfolio all-balances` (this skill) 2. Check price trend for top holdings → `opentrade-market`
`portfolio all-balances`	1. View detailed analytics (market cap, 24h change) for a token → `opentrade-token` 2. Swap a token → `opentrade-dex-swap` 3. View price chart for a token → `opentrade-market`
`portfolio token-balances`	1. View full portfolio across all tokens → `opentrade portfolio all-balances` (this skill) 2. Swap this token → `opentrade-dex-swap`

Present conversationally, e.g.: "Would you like to see the price chart for your top holding, or swap any of these tokens?" — never expose skill names or endpoint paths to the user.

CLI Command Reference

1. opentrade portfolio chains

Get supported chains for balance queries. No parameters required.

opentrade portfolio chains

Return fields:

Field	Type	Description
`name`	String	Chain name (e.g., `"XLayer"`)
`logoUrl`	String	Chain logo URL
`shortName`	String	Chain short name (e.g., `"OKB"`)
`chainIndex`	String	Chain unique identifier (e.g., `"196"`)

2. opentrade portfolio total-value

Get total asset value for a wallet address.

opentrade portfolio total-value --address <address> --chains <chains> [--asset-type <type>] [--exclude-risk <bool>]

Param	Required	Default	Description
`--address`	Yes	-	Wallet address
`--chains`	Yes	-	Chain names or IDs, comma-separated (e.g., `"xlayer,solana"` or `"196,501"`)
`--asset-type`	No	`"0"`	`0`=all, `1`=tokens only, `2`=DeFi only
`--exclude-risk`	No	`true`	`true`=filter risky tokens, `false`=include. Only ETH/BSC/SOL/BASE

Return fields:

Field	Type	Description
`totalValue`	String	Total asset value in USD

3. opentrade portfolio all-balances

Get all token balances for a wallet address.

opentrade portfolio all-balances --address <address> --chains <chains> [--exclude-risk <value>]

Param	Required	Default	Description
`--address`	Yes	-	Wallet address
`--chains`	Yes	-	Chain names or IDs, comma-separated, max 50
`--exclude-risk`	No	`"0"`	`0`=filter out risky tokens (default), `1`=include. Only ETH/BSC/SOL/BASE

Return fields (per token in tokenAssets[]):

Field	Type	Description
`chainIndex`	String	Chain identifier
`tokenContractAddress`	String	Token contract address
`symbol`	String	Token symbol (e.g., `"OKB"`)
`balance`	String	Token balance in UI units (e.g., `"10.5"`)
`rawBalance`	String	Token balance in base units (e.g., `"10500000000000000000"`)
`tokenPrice`	String	Token price in USD
`isRiskToken`	Boolean	`true` if flagged as risky

4. opentrade portfolio token-balances

Get specific token balances for a wallet address.

opentrade portfolio token-balances --address <address> --tokens <tokens> [--exclude-risk <value>]

Param	Required	Default	Description
`--address`	Yes	-	Wallet address
`--tokens`	Yes	-	Token list: `"chainIndex:tokenAddress"` pairs, comma-separated. Use empty address for native token (e.g., `"196:"` for native OKB). Max 20 items.
`--exclude-risk`	No	`"0"`	`0`=filter out (default), `1`=include

Return fields: Same schema as all-balances (tokenAssets[]).

Input / Output Examples

User says: "Check my wallet total assets on XLayer and Solana"

opentrade portfolio total-value --address 0xYourWallet --chains "xlayer,solana"
# → Display: Total assets $12,345.67

User says: "Show all tokens in my wallet"

opentrade portfolio all-balances --address 0xYourWallet --chains "xlayer,solana,ethereum"
# → Display:
#   OKB:  10.5 ($509.25)
#   USDC: 2,000 ($2,000.00)
#   USDT: 1,500 ($1,500.00)
#   ...

User says: "Only check USDC and native OKB balances on XLayer"

opentrade portfolio token-balances --address 0xYourWallet --tokens "196:,196:0x74b7f16337b8972027f6196a17a631ac6de26d22"
# → Display: OKB: 10.5 ($509.25), USDC: 2,000 ($2,000.00)

Edge Cases

Zero balance: valid state — display $0.00, not an error
Unsupported chain: call opentrade portfolio chains first to confirm
chains exceeds 50: split into batches, max 50 per request
--exclude-risk not working: only supported on ETH/BSC/SOL/BASE
DeFi positions: use --asset-type 2 to query DeFi holdings separately
Address format mismatch: EVM address on Solana chain will return empty data — do NOT mix
Network error: retry once, then prompt user to try again later
Region restriction (error code 50125 or 80001): do NOT show the raw error code to the user. Instead, display a friendly message: ⚠️ Service is not available in your region. Please switch to a supported region and try again.

Amount Display Rules

Token amounts in UI units (1.5 ETH), never base units (1500000000000000000)
USD values with 2 decimal places
Large amounts in shorthand ($1.2M)
Sort by USD value descending

Global Notes

--chains supports up to 50 chain IDs (comma-separated, names or numeric)
--asset-type: 0=all 1=tokens only 2=DeFi only (only for total-value)
--exclude-risk only works on ETH(1)/BSC(56)/SOL(501)/BASE(8453)
token-balances supports max 20 token entries
The CLI resolves chain names automatically (e.g., ethereum → 1, solana → 501)
The CLI handles authentication internally via environment variables — see Prerequisites step 4 for default values

opentrade-portfolio

More from this repository

More from this repository

OpenTrade Wallet Portfolio CLI

Pre-flight Checks

Router Discovery

Skill Routing

Quickstart

Chain Name Support

Command Index

Cross-Skill Workflows

Workflow A: Pre-Swap Balance Check

Workflow B: Portfolio Overview + Analysis

Workflow C: Sell Underperforming Tokens

Operation Flow

Step 1: Identify Intent

Step 2: Collect Parameters

Step 3: Call and Display

Step 4: Suggest Next Steps

CLI Command Reference

1. opentrade portfolio chains

2. opentrade portfolio total-value

3. opentrade portfolio all-balances

4. opentrade portfolio token-balances

Input / Output Examples

Edge Cases

Amount Display Rules

Global Notes

OpenTrade Wallet Portfolio CLI

Pre-flight Checks

Router Discovery

Skill Routing

Quickstart

Chain Name Support

Command Index

Cross-Skill Workflows

Workflow A: Pre-Swap Balance Check

Workflow B: Portfolio Overview + Analysis

Workflow C: Sell Underperforming Tokens

Operation Flow

Step 1: Identify Intent

Step 2: Collect Parameters

Step 3: Call and Display

Step 4: Suggest Next Steps

CLI Command Reference

1. opentrade portfolio chains

2. opentrade portfolio total-value

3. opentrade portfolio all-balances

4. opentrade portfolio token-balances

Input / Output Examples

Edge Cases

Amount Display Rules

Global Notes