jitx

name

jitx

description

Base skill for JITX hardware design workflow. Use for JITX Python projects, PCB design, circuit creation, and build commands. Use when the user asks to "build my JITX design", "set up JITX environment", "create a circuit", "build a complete board", "design a PCB from requirements", or "create a full JITX project". For multi-component designs (3+ components, substrate, circuits), invoke the Project Builder workflow for orchestrated parallel agent execution with quality gates. CRITICAL - If user asks to create/model/generate a component or mentions a part number (NE555, LM1117, RP2040, etc.), immediately invoke jitx-component-modeler subskill. If user asks to create a substrate, stackup, via definitions, or routing structures, invoke jitx-substrate-modeler subskill.

JITX Workflow Skill

Base skill for JITX hardware design automation. JITX is a Python framework for programmatic PCB design.

Environment Setup

Before any JITX work, check and fix the environment automatically:

# Check for JITX project
if [ ! -f pyproject.toml ] || ! grep -q "jitx" pyproject.toml; then
  echo "ERROR: Not a JITX project (no pyproject.toml with jitx dependency)"
  exit 1
fi

# Create venv if missing, install deps
if [ ! -d .venv ]; then
  python3 -m venv .venv
  source .venv/bin/activate
  pip install -e . --quiet 2>&1 | tail -1
  pip install ruff --quiet 2>&1 | tail -1
else
  source .venv/bin/activate
fi

# Verify core imports (don't check __version__ — not present in all JITX versions).
# Fail loud if any import is missing; do not work around with substitutions.
python - <<'PY'
import sys
required = [
    "jitx",
    "jitxlib",
    "jitxlib.parts",
    "jitxlib.symbols.box",
    "jitxlib.voltage_divider",
]
missing = []
for mod in required:
    try:
        __import__(mod)
    except Exception as e:
        missing.append(f"{mod}: {e}")
if missing:
    print("ERROR: missing required JITX modules:")
    for m in missing:
        print(f"  - {m}")
    sys.exit(1)
print("JITX core ready")
PY

Also probe the target substrate package if known (e.g., python -c "import jitxlib.jlcpcb" when the user has chosen JLCPCB). For complete-board tier, the Phase 0 → 1 gate requires this probe.

Missing-dependency rule: if any required import fails, stop and surface it to the user as a blocker. Do NOT remove or substitute design requirements as a workaround (e.g. dropping controlled-impedance routing because jitxlib didn't import). See references/project-builder-flow.md Recovery Procedures → "Missing dependency escalation".

Only install deps on first run (venv creation). Skip pip install on subsequent runs — it's slow and noisy. Don't ask user to do manual setup.

Python Linting Setup (Recommended)

Pyright is available for Python type checking:

Install:

pip install pyright

or

npm install -g pyright

Verify: Ask Claude to "check for type errors" or run manually:

pyright src/

JITX Python Code Conventions

Durable rules for JITX Python user code. The first three don'ts protect JITX's internal instantiation tracking; the rest are standard Python encapsulation discipline.

Don'ts

• No setattr / getattr. They exist for very narrow scenarios; JITX user code is not one of them. Use lists/dicts when you need to store a programmatic collection on self.
• No dynamic types at runtime. Do not call type(...) to construct a new class on the fly. This breaks JITX's internal instantiation tracking. Express the same intent with parameterized classes — instantiate, don't synthesize.
• No subclassing JITX classes inside functions or methods. Same instantiation-tracking failure mode. Declare jitx-class subclasses at module scope (nested at class-body scope is fine).
• No type() for type checks. Use isinstance so subclasses are handled correctly.
• No access to double-underscore (private) members. They are private for a reason.
• No use of leading-underscore packages, modules, or functions from elsewhere. The Python "protected" convention applies. The single exception is a method calling another method on the same class.

Dos

• Run pyright for type checking and language-server diagnostics.
• Run ruff check for common-mistake analysis (the ruff package is already installed by the environment-setup step).
• Run ruff format for style consistency.

Running JITX Designs

# Build a specific design
python -m jitx build <module.path.DesignClass>

# Build all designs in project
python -m jitx build-all

Don't run parallel builds on the same design. Concurrent JITX builds against the same design aren't reliable — cache state, build artifacts, and design-explorer output overlap. Sequence those. Parallel builds of different designs in the same project (different test designs, different module paths) share the WebSocket session but are generally safe — the JITX backend serializes internally, possibly with a wait. The skill orchestrator's Phase 1 runs sub-agents in parallel on different test designs; the parallelism is at the design-work level, and concurrent builds on distinct designs are an acceptable consequence.

Success output: status: ok Error output: Python traceback or status: error

Output files (in designs/<design_name>/):

• cache/netlist.json - JSON netlist for verification
• cache/design-explorer.json - Design hierarchy
• design-info/stable.design - Design snapshot

Project Structure

Standard JITX project layout:

project/
├── pyproject.toml          # Project config with JITX deps
├── src/<namespace>/
│   ├── components/         # Custom component definitions
│   │   ├── <category>/     # mcus, connectors, power, etc.
│   │   │   └── <mfr>_<mpn>.py
│   │   └── __init__.py
│   ├── circuits/           # Reusable circuit blocks
│   └── designs/            # Top-level designs
├── designs/                # Build output directory
└── .venv/                  # Virtual environment

First: Pick the Workflow Tier

STOP. Classify first. Before any architecture proposal, parts research, design prose, code, or Skill(...) invocation other than environment probes, your first observable action must be a chat line of the form:

Workflow tier: single-task | complete-board — because <one-sentence reason>

For complete-board, the next observable action must be writing PLAN.md (and ARCHITECTURE.md). Verbal architecture proposals, parts-list bullets, "here's what I'll build" prose, or Write(...) of code before PLAN.md exists are explicitly invalid work for a complete-board project — they must be backed out before the workflow can continue.

If you find yourself already typing "Big design — here's my proposed architecture..." or "I'll set up the skeleton and start filling in components", you have skipped Phase 0. Stop, classify, and create PLAN.md first.

This callout exists because the prior failure mode was exactly this: the agent jumped from request to architecture prose to component files without classifying, never entered Phase 0, and bypassed every Pass 1–5 enforcement.

After environment setup, classify the work into one of two tiers. The tier names which output blocks are required and whether the formal Phase 0 → Phase 4 chain applies. Every tier requires a task acceptance block for each unit of work — no exceptions.

Tier	When	Required output	Path
single-task	One subskill against one artifact: a component, a circuit, a substrate, a constraint set, a pin-assignment wrapper. No top-level assembly.	Task acceptance block in chat	Invoke the subskill directly
complete-board	Anything beyond a single isolated artifact — anything that produces a buildable board, no matter how few components.	Task acceptance block per task + phase exit gate blocks + Phase 3b audit + Phase 4 verification	Full Project Builder Workflow below

If you're tempted to call something "small" or "trivial" to avoid the workflow, classify it as complete-board. The Phase 0–4 ceremony is cheap on a small board (a few extra block emissions); the cost of skipping it on a real board is shipping with required features missing. The original failure mode of this skill was exactly the "looks small, skip the workflow" escape hatch.

For tier definitions, the task acceptance block, phase exit gate blocks, the Phase 3b design audit block, and the Phase 4 verification block: read references/completion-blocks.md.

Do NOT skip the planning phase for complete-board designs. Do not start exploring libraries or writing code until PLAN.md exists.

Core Concepts

Circuit: Python class inheriting from jitx.Circuit. Contains components and connections.

Component: Python class inheriting from jitx.Component. Defines ports, landpattern, symbol.

Design: Python class inheriting from design base (e.g., SampleDesign). Top-level entry point.

For net wiring, passives, and circuit patterns, invoke the jitx-circuit-builder subskill.

Project Builder Workflow

For building complete JITX designs from requirements — multiple components, substrate, circuits, and constraints assembled into a working board. Use this when the design involves 3+ components with a substrate and interconnected circuits.

Phases

Phase	What	Parallelism
0	Requirements analysis, decompose into tasks, create PLAN.md	Orchestrator only
1	Model substrate + all components	Fully parallel sub-agents
2	SI constraints, pin assignment, circuit wiring	Clustered parallel
3	Top-level assembly (instantiate, connect, constrain)	Single agent
3b	Design-level analysis + loopback (voltage domains, bus contention, missing components, SI)	Orchestrator — loops back to fix upstream
4	Build, verify DRC + SI, iterate on failures	Single agent

For full phase details and gate criteria: read references/project-builder-flow.md For how to decompose requirements into tasks: read references/decomposition-guide.md For PLAN.md format: read references/plan-template.md For ARCHITECTURE.md format: read references/architecture-template.md

Build Safety — Don't Parallelize Same-Design Work

Concurrent builds of the same JITX design share cache state, build artifacts, and design-explorer output. Sequence them. Concurrent builds of different designs in the same project — for example, parallel sub-agents each building their own component test design — share the WebSocket session but are generally safe: the JITX backend serializes the work internally, possibly with a wait.

For the project-builder workflow: Phase 1 sub-agents can run in parallel, each working on its own component file and its own test design. They are not running concurrent builds of the same design. Phase 2/3/4 builds are inherently sequential.

For ad-hoc work outside the project-builder flow: just don't run two python -m jitx build calls against the same design at once.

Grep Gate Enforcement

Copy scripts/grep_gates.sh from this skill into the project's scripts/ directory. Sub-agents (and the orchestrator at every phase exit gate) run it against src/<ns>/ to enforce JITX code conventions and top-level-only rules:

bash scripts/grep_gates.sh src/<ns>/

The script reports hard-fail hits (which block task acceptance and gate transitions) and review-required hits (which need a disposition in the task acceptance block). Pattern set and disposition rules: references/completion-blocks.md "Grep Gate Patterns".

Two-Tier Quality System

Sub-agent work goes through TWO quality checks before being accepted:

1. Sub-Agent Self-Validation ("Think Twice")

After initial implementation, sub-agents MUST stop and run the domain-specific checklist against the datasheet before returning. This forced second pass typically catches 3-5 missed details (floating enable pins, missing thermal pads, wrong output types, forgotten decoupling). Sub-agents return a task acceptance block documenting what they checked and fixed — the block is mandatory; "build clean" is not a substitute. See references/completion-blocks.md for the template.

2. Orchestrator Acceptance Review

The orchestrator does NOT blindly trust the self-validation block. For each returned task:

• Read the generated code for obvious issues
• Verify the build claim (re-run python -m jitx build for critical tasks)
• Spot-check high-risk checklist items independently
• Verify interface compatibility with downstream tasks
• Append the acceptance verdict to the same block: accept / rework (send back with specific issues) / reject (replan)

A task without an acceptance block is in-progress, not done. Phase gates only open when ALL tasks in the phase have Verdict (acceptance): accept blocks.

For the full protocol: read references/task-execution.md For block templates: read references/completion-blocks.md For domain checklists: read references/domain-checklists.md

Exit Gates

Gate	Key Criteria
0 → 1	PLAN.md created with all tasks, data source audit approved, user approved plan
1 → 2	All components + substrate build individually, acceptance reviews passed
2 → 3	All circuits build, constraint classes valid, provide/require interfaces consistent
3 → 3b	Top-level assembles, all nets connected, power tree complete
3b → 4	Design-level analysis passed: voltage domains correct, no bus contention, no missing components, SI constraints functional. All blocking issues fixed via loopback.

Do NOT proceed past a gate if any task has unresolved failures. Fix upstream before moving downstream.

Parts Data and Footprint Conversion

Claude selects parts based on engineering requirements first. Data for each component comes from the user-approved data source plan (see Phase 0 data audit).

Data sources (in priority order):

1. User-provided — datasheets, KiCad footprints, or specs the user supplies directly
2. JITX generators — standard packages (QFN, SOIC, BGA, SOT, SON, QFP) with dimensions from datasheets
3. LCSC / JLCPCB via parts2jitx — split consent. Lookup / evidence (parts2jitx-lcsc <C-number>, --pinout) is implied when the user names LCSC/JLCPCB as the channel; the orchestrator may pip install parts2jitx automatically. Footprint data ingestion (parts2jitx-lcsc --footprint, parts2jitx-kicad) is a separate path that requires explicit per-project user approval because EasyEDA component data has its own terms of use.

   pip install parts2jitx
   parts2jitx-lcsc <C-number>            # lookup / evidence (auto-OK with named channel)
   parts2jitx-lcsc <C-number> --pinout   # lookup / evidence
   parts2jitx-lcsc <C-number> --footprint -o ...   # footprint data — explicit approval required
   parts2jitx-kicad <file.kicad_mod>     # footprint data — explicit approval required
   

   See references/parts-sourcing.md "LCSC / JLCPCB via parts2jitx" for the full split-consent table.

For non-standard packages (connectors, RF modules): convert from a .kicad_mod file (user-provided or downloaded). NEVER hand-craft pad positions — use the converter. Standard packages use built-in JITX generators. All symbols use BoxSymbol. Exception: mechanical / vendor-defined footprints (Tag-Connect, pogo-pin fixtures, castellations, fiducials) where no purchasable component exists — see references/parts-sourcing.md "Mechanical / Vendor-Defined Footprints".

For details: read references/parts-sourcing.md

Shared State Documents

The orchestrator creates and maintains these in the project root:

• PLAN.md — Task registry with status, dependencies, and acceptance verdicts. Single source of truth. Enables session resumption.
• ARCHITECTURE.md — Power tree, interface map, module hierarchy. Gives sub-agents the big picture.

Subskills

Component Modeler (jitx-component-modeler)

ALWAYS invoke this subskill when user:

• Provides a datasheet PDF (file path or URL)
• Asks to "create a component", "model a part", or "add a component"
• Mentions specific part numbers (e.g., "NE555", "RP2040", "LM1117")

How to invoke: Use the Skill tool with skill: "jitx-skills:jitx-component-modeler"

Supports:

• BGA, QFN, SOIC, SON, SOT packages
• Multi-unit symbols and thermal pads
• Complex pin mappings
• Batch component creation

Do NOT attempt component generation without invoking this subskill - it contains critical patterns, dimension mappings, and code templates.

Circuit Builder (jitx-circuit-builder)

Invoke this subskill when user asks to:

• "Wire up" or "connect" components
• Build application circuits from datasheets
• Work with passives (resistors, capacitors, inductors)
• Set up power connections or decoupling
• Add copper pours or geometry

How to invoke: Use the Skill tool with skill: "jitx-skills:jitx-circuit-builder"

Covers:

• Circuit class structure and wiring
• Passives from jitxlib with query refinement
• Voltage divider solver
• Pours and copper geometry
• Component placement

For provide/require pin assignment patterns, use jitx-pin-assignment instead.

Substrate Modeler (jitx-substrate-modeler)

Ask the user which fab house they are targeting. If they confirm JLCPCB, predefined substrates from jitxlib.jlcpcb are available:

• JLC04161H_1080 — 4-layer, 1080 prepreg, RS_50/DRS_90/DRS_100
• JLC04161H_7628 — 4-layer, 7628 prepreg, RS_50/DRS_90/DRS_100
• JLC06161H_7628 — 6-layer, 7628 prepreg, RS_50/DRS_100

Import: from jitxlib.jlcpcb import JLC04161H_1080. These include stackup, fab rules, 11 via definitions, and routing structures.

Invoke this subskill to create a custom substrate (the default path unless user opts into a predefined one):

• User has not confirmed JLCPCB as fab house
• Non-FR-4 materials (Rogers, Megtron)
• Non-standard layer count or impedance targets
• Additional routing structures beyond predefined

How to invoke: Use the Skill tool with skill: "jitx-skills:jitx-substrate-modeler"

Covers:

• Stackup and Symmetric layer definitions
• Material properties (Dielectric, Conductor)
• All via types (through-hole, laser micro, stacked, blind, buried, backdrilled)
• RoutingStructure with NeckDown, via fencing, geometry, reference planes
• DifferentialRoutingStructure with pair spacing and uncoupled regions
• FabricationConstraints for manufacturing rules
• Design constraint rules with Tags

Interconnect Constraints (jitx-interconnect-constraints)

Invoke this subskill when user asks to:

• Apply signal integrity constraints to signals
• Use the >> topology operator for ordered routing
• Constrain differential pairs (skew, loss, impedance)
• Match timing between bus signals (length matching)
• Define pin models (BridgingPinModel, TerminatingPinModel)
• Set up protocol-specific constraints (PCIe, USB, DisplayPort, RGMII, Ethernet, DDR)
• Use ReferencePlanes for routing structure constraints
• Build custom SignalConstraint subclasses

How to invoke: Use the Skill tool with skill: "jitx-skills:jitx-interconnect-constraints"

Covers:

• TopologyNet (>> operator) vs Net (+ operator)
• Constrain, ConstrainDiffPair, ConstrainReferenceDifference
• DiffPairConstraint for reusable diff pair constraints
• SignalConstraint[T] protocol constraint pattern
• PinModel, BridgingPinModel, TerminatingPinModel
• ReferencePlanes context manager
• Built-in protocol constraints from jitxlib

Pin Assignment (jitx-pin-assignment)

Invoke this subskill when user asks to:

• Model flexible pin assignment (provide/require beyond basics)
• Implement peripheral muxing on shared pins
• Allow DiffPair P/N polarity swapping
• Configure PCIe lane swapping or width variants
• Enable DDR byte lane or bit swapping
• Use @provide.subset_of or programmatic Provide
• Build hierarchical provider composition
• Apply topology (>>) and SI constraints on pin-assigned ports
• Combine pin assignment with ConstrainDiffPair or ConstrainReferenceDifference for high-speed protocols

How to invoke: Use the Skill tool with skill: "jitx-skills:jitx-pin-assignment"

Covers:

• @provide, @provide.one_of, @provide.subset_of decorators
• Programmatic Provide().one_of(), Provide().all_of(), Provide().subset_of()
• Hierarchical provider composition with self.require() inside @provide
• Protocol-specific pin flexibility rules (DiffPair P/N, PCIe lanes, DDR4 byte/bit)
• Topology and constraint composition on pin-assigned ports
• DiffPairConstraint and ConstrainReferenceDifference with require()

Documentation Lookup

JITX docs: https://docs.jitx.com/en/latest/ or LLM-friendly access at https://docs.jitx.com/llms.txt

When to fetch docs:

• Unfamiliar API class or method → fetch API reference page
• Protocol wiring (USB, Ethernet, I2C) → fetch protocol docs
• Landpattern generator parameters → fetch generator docs
• UI commands or shortcuts → fetch UI command page
• Design patterns (pin assignment, SI constraints) → fetch essentials page

How to look up:

1. Read references/docs-index.md to find the right page URL
2. Use WebFetch to retrieve the page content
3. Apply the information to the task

Common lookups:

Topic	Doc Path
Pin assignment	essentials/design/pin_assignment.html
Design hierarchy	essentials/design/design-hierarchy.html
Autorouter	essentials/physical_design/autorouter.html
SI constraints	essentials/SI/constraints.html
SI topology	essentials/SI/topology.html
SI API reference	api/jitx.si.html
Component class	api/jitx.component.html
Circuit class	api/jitx.circuit.html
QFN landpattern	jitxlib-standard/jitxlib.landpatterns.generators.qfn.html
BGA landpattern	jitxlib-standard/jitxlib.landpatterns.generators.bga.html
USB protocol	jitxlib-standard/jitxlib.protocols.usb.html
Box symbol	jitxlib-standard/jitxlib.symbols.box.html

For complete index with all pages, see references/docs-index.md.

Formatting

Run ruff format on generated code to keep it consistent:

ruff format path/to/file.py

Quick Reference

Task	Command/Pattern
Build design	python -m jitx build module.Design (sequence calls — see "Build Safety")
Format code	ruff format path/to/file.py