name	trace
description	Add opt_trace() calls for debugging and profiling. Use -t option to enable specific trace tiers and levels.

Trace Skill Instructions

The opt_trace() macro provides printf-style debug logging with dynamic log levels and categories. The usage pattern is:

opt_trace(tier, "format string", ...);

tier is a bitflag defined in debug.h that specifies the trace category (e.g., TT_COMPILE, TT_MEMORY) of the log message and verbose level. The verbose level is an integer from 0 (least verbose) to 7 (most verbose) that specifies the importance of the log message. In the opt_trace() call, the tier is specified with the TT_ category bits combined with the verbose level in the lowest 3 bits. For example, TT_COMPILE|1 means a message in the compile category with verbose level 1.

The trace tier is compared against the trace flags specified at runtime via the -t option. If the tier matches the enabled flags and the message's verbose level is less than or equal to the enabled level, the message will be printed to the console.

Running with Tracing Enabled

The opt_trace() logging can be enabled with the -t option when running neolith. For example:

# Enables trace tier 020 at verbose level 1
./neolith -f neolith.conf -t 021

The trace flags are specified as an octal number, where the bits represent the categories and levels to enable. The lowest 3 bits specify the log level (0-7), while the higher bits specify the tiers. In this example, tier 020 corresponds to category TT_COMPILE, and level 1 means only messages with level 0 or 1 will be printed.

The trace tier -1 enables all categories and levels, while 0 disables all tracing.

Trace Levels

Level 0: reserved for tracing particular events at development stage. Change to 1 or higher before committing code with opt_trace().
Level 1: important check-points for the tier, such as completion of a major phase (e.g., end of compilation, start of execution)
Level 2: significant events within the tier, such as decision points, state changes, or important function calls
Level 3: detailed information about the flow of execution, such as entering/exiting functions, I/O operations, or memory allocations
Level 4: verbose information about variable values, intermediate results, or less critical events
Level 5 to Level 7: increasingly verbose and detailed information, useful for in-depth debugging but may produce a large volume of logs

Trace Skill Instructions

The opt_trace() macro provides printf-style debug logging with dynamic log levels and categories. The usage pattern is:

opt_trace(tier, "format string", ...);

Running with Tracing Enabled

The opt_trace() logging can be enabled with the -t option when running neolith. For example:

# Enables trace tier 020 at verbose level 1 ./neolith -f neolith.conf -t 021

The trace tier -1 enables all categories and levels, while 0 disables all tracing.

Trace Levels

Level 0: reserved for tracing particular events at development stage. Change to 1 or higher before committing code with opt_trace().

Level 1: important check-points for the tier, such as completion of a major phase (e.g., end of compilation, start of execution)

Level 2: significant events within the tier, such as decision points, state changes, or important function calls

Level 3: detailed information about the flow of execution, such as entering/exiting functions, I/O operations, or memory allocations

Level 4: verbose information about variable values, intermediate results, or less critical events

Level 5 to Level 7: increasingly verbose and detailed information, useful for in-depth debugging but may produce a large volume of logs