nav-loop

name	nav-loop
description	Run tasks until complete with structured completion signals. Auto-invoke when user says "run until done", "keep going until complete", "iterate until finished", "loop mode", "autonomous mode".
allowed-tools	Read, Write, Edit, Bash, Grep, Glob, AskUserQuestion
version	1.0.0

Navigator Loop Skill

Execute tasks iteratively until completion with structured signals, stagnation detection, and dual-condition exit gates.

Why This Exists

Traditional AI coding requires manual "keep going" prompts. Navigator Loop provides:

• Structured completion signals (NAVIGATOR_STATUS block)
• Dual-condition exit gate (heuristics + explicit signal)
• Stagnation detection (circuit breaker for stuck loops)
• Progress visibility (phases: INIT → RESEARCH → IMPL → VERIFY → COMPLETE)

Based on Ralph's autonomous loop innovations, adapted for Navigator's context-efficient architecture.

When to Invoke

Auto-invoke when:

• User says "run until done", "keep going until complete"
• User says "iterate until finished", "autonomous mode"
• User says "loop mode", "don't stop until done"
• Task document has loop_mode: true

DO NOT invoke if:

• Single-step task (no iteration needed)
• User says "just do this once"
• Already in loop mode (prevent nested loops)
• User explicitly disabled loop mode

Configuration

Loop mode settings in .agent/.nav-config.json:

{
  "loop_mode": {
    "enabled": false,
    "max_iterations": 5,
    "stagnation_threshold": 3,
    "exit_requires_explicit_signal": true,
    "show_status_block": true,
    "iteration_approval": "none",
    "periodic_interval": 3,
    "never_pause_on_stagnation": false,
    "stagnation_diversify_strategy": "combine"
  }
}

Core options:

• enabled: Default state for new tasks
• max_iterations: Hard cap to prevent infinite loops (1-20)
• stagnation_threshold: Same-state count before pause (2-5)
• exit_requires_explicit_signal: Require EXIT_SIGNAL alongside heuristics
• show_status_block: Render NAVIGATOR_STATUS each iteration

Autonomous / overnight options (v6.2.2+):

• iteration_approval: When to prompt the user for accept/reject between iterations.
  • "none" (default) — never prompt; loop runs uninterrupted
  • "strict" — prompt after every iteration
  • "periodic" — prompt every N iterations (where N = periodic_interval, default 3)
• periodic_interval: When iteration_approval == "periodic", the cadence of prompts. Default 3 (every 3rd iteration). Set higher for less frequent check-ins on long overnight runs (e.g., 5 or 10).
• never_pause_on_stagnation: If true, stagnation triggers auto-diversification instead of an AskUserQuestion pause. Required for true overnight runs. Inspired by karpathy/autoresearch's NEVER STOP directive.
• stagnation_diversify_strategy: Which recovery to attempt when never_pause_on_stagnation fires.
  • "combine" — combine previous near-misses / partially-met indicators
  • "radical" — try a substantially different approach (re-architect, swap library)
  • "reread" — re-read the in-scope task/system docs for missed signals

Safety guard: Setting never_pause_on_stagnation: true REQUIRES max_iterations to be set explicitly (the default of 5 is fine; the point is — no infinite default). Without a max, an autonomous loop can spin forever on a fundamentally broken task.

Execution Steps

Step 1: Initialize Loop State

Load configuration:

python3 functions/phase_detector.py --init

Initialize tracking variables:

iteration = 1
max_iterations = config.loop_mode.max_iterations or 5
stagnation_threshold = config.loop_mode.stagnation_threshold or 3
hash_history = []
phase = "INIT"

Display loop start:

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
LOOP MODE ACTIVATED
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Task: {TASK_DESCRIPTION}
Max iterations: {max_iterations}
Stagnation threshold: {stagnation_threshold}

Starting iteration 1...
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Step 2: Execute Iteration

Perform task work based on current phase:

Phase	Actions
INIT	Load context, understand requirements
RESEARCH	Explore codebase, find patterns
IMPL	Write code, make changes
VERIFY	Run tests, validate functionality, simplify code
COMPLETE	All indicators met, ready to exit

Track changes during iteration:

• Files read (for RESEARCH detection)
• Files changed (for IMPL detection)
• Tests run (for VERIFY detection)
• Commits made (for completion indicator)

Step 3: Generate Status Block

After each iteration, generate NAVIGATOR_STATUS:

python3 functions/status_generator.py \
  --phase "{phase}" \
  --iteration "{iteration}" \
  --max-iterations "{max_iterations}" \
  --indicators "{indicators_json}" \
  --state-hash "{current_hash}" \
  --prev-hash "{previous_hash}" \
  --stagnation-count "{stagnation_count}"

Display status block:

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
NAVIGATOR_STATUS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Phase: {PHASE}
Iteration: {N}/{MAX}
Progress: {PERCENT}%

Completion Indicators:
  [{x or space}] Code changes committed
  [{x or space}] Tests passing
  [{x or space}] Code simplified
  [{x or space}] Documentation updated
  [{x or space}] Ticket closed
  [{x or space}] Marker created

Exit Conditions:
  Heuristics: {MET}/{TOTAL} (need 2+)
  EXIT_SIGNAL: {true/false}

State Hash: {HASH}
Previous Hash: {PREV_HASH}
Stagnation: {COUNT}/{THRESHOLD}

Next Action: {NEXT_ACTION}
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Step 3.5: Per-Iteration Approval Gate (optional)

Skip this step if config.loop_mode.iteration_approval == "none" (default).

Run this step if the user wants oversight between iterations — for risky changes, learning the loop's behavior, or sanity-checking before a long run.

Setting	Behavior
"none"	Never prompt. Loop continues to Step 4.
"strict"	Prompt after every iteration.
"periodic"	Prompt every Nth iteration. N defaults to 3; configurable via loop_mode.periodic_interval.

When prompting, use AskUserQuestion immediately after the status block:

Question: "Accept iteration {N} and continue?"
Options:
  1. [Continue] - Iteration accepted, proceed to next
  2. [Adjust]   - Provide feedback, incorporate into next iteration
  3. [Abort]    - End loop, create partial-completion marker

Decision handling:

• Continue: Proceed to Step 4 normally.
• Adjust: Capture the user's feedback into a transient note, do NOT advance hash history (so the next iteration is judged as fresh progress), continue to Step 4.
• Abort: Jump to Step 8 (Cleanup) with status: "user_aborted".

This gate runs BEFORE stagnation detection so that a rejected iteration doesn't accidentally accumulate stagnation count.

Step 4: Check Stagnation

Calculate state hash:

python3 functions/stagnation_detector.py \
  --phase "{phase}" \
  --indicators "{indicators_json}" \
  --files-changed "{files_json}" \
  --history "{hash_history_json}"

If stagnation detected (same hash for N iterations), the response depends on never_pause_on_stagnation.

Default behavior (never_pause_on_stagnation: false)

Prompt the user:

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
STAGNATION DETECTED
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Same state detected for {N} consecutive iterations.

Current State:
  Phase: {PHASE}
  Indicators: {MET}/{TOTAL}
  Last Action: {LAST_ACTION}

Possible causes:
1. Blocked by external dependency
2. Unclear requirements
3. Test failures preventing progress
4. Missing context or permissions

Options:
1. [Continue] - Try one more iteration
2. [Clarify] - Explain what's blocking
3. [Abort] - End loop, manual intervention

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Use AskUserQuestion for choice:

• Continue: Reset stagnation counter, continue loop
• Clarify: User explains blocker, incorporate and continue
• Abort: Exit loop with partial completion marker

Autonomous behavior (never_pause_on_stagnation: true)

The loop is running unattended (overnight, CI, etc.). Do NOT prompt — auto-diversify based on stagnation_diversify_strategy:

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
STAGNATION → AUTO-DIVERSIFY ({STRATEGY})
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Same state for {N} iterations. Auto-recovery: {STRATEGY}
Stagnation counter reset.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Strategy	What to attempt next iteration
combine	Re-examine partially-met indicators; combine 2 near-miss approaches from previous iterations
radical	Discard the current approach; try a substantially different design (different library, different architecture, different algorithm)
reread	Re-read the in-scope task doc + relevant system docs; look for a missed signal or constraint

After diversifying:

• Reset stagnation counter to 0
• Record the diversification in the iteration's notes (so the next status block reflects it)
• Continue to Step 5

Hard stop: Even in autonomous mode, the loop still terminates on max_iterations. If diversification has been triggered ≥3 times within a single run, escalate to the abort path (creates a loop-aborted marker and exits) — repeated diversification is itself a signal that the task is fundamentally stuck.

Inspired by karpathy/autoresearch's NEVER STOP directive: "If you run out of ideas, think harder — read papers, re-read in-scope files for new angles, try combining previous near-misses, try more radical architectural changes."

Step 5: Check Exit Conditions

Evaluate dual-condition gate:

python3 functions/exit_gate.py \
  --indicators "{indicators_json}" \
  --exit-signal "{exit_signal}" \
  --require-explicit "{config.exit_requires_explicit_signal}"

Exit conditions:

1. Heuristics: At least 2 completion indicators met
2. EXIT_SIGNAL: Explicit signal that task is complete

Completion indicators (mapped from autonomous protocol):

• code_committed: Changes committed to git
• tests_passing: Test suite passes (exit code 0)
• code_simplified: Code simplified for clarity (v5.4.0+)
• docs_updated: Documentation files changed
• ticket_closed: PM tool ticket marked done
• marker_created: Completion marker exists

Exit decision logic:

IF heuristics >= 2 AND exit_signal == true:
  → EXIT: Task complete
ELIF heuristics >= 2 AND exit_signal == false:
  → CONTINUE: Awaiting explicit completion signal
ELIF exit_signal == true AND heuristics < 2:
  → BLOCKED: Cannot exit with insufficient indicators
ELSE:
  → CONTINUE: More work needed

Step 6: Handle Max Iterations

If iteration >= max_iterations:

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
MAX ITERATIONS REACHED
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Completed {MAX} iterations without full completion.

Current State:
  Phase: {PHASE}
  Indicators: {MET}/{TOTAL}
  EXIT_SIGNAL: {true/false}

Progress made:
- {PROGRESS_ITEM_1}
- {PROGRESS_ITEM_2}

Options:
1. [Extend] - Add 3 more iterations
2. [Complete] - Accept current state as done
3. [Abort] - Exit without completion

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Step 7: Complete Loop

When exit conditions met, emit the exit signal in JSON format and display completion:

{"v":2,"type":"exit","success":true,"reason":"All criteria met"}

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
LOOP COMPLETE
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Task: {TASK_DESCRIPTION}
Iterations: {FINAL_COUNT}/{MAX}
Final Phase: COMPLETE

Completion Indicators:
  [x] Code changes committed
  [x] Tests passing
  [x] Code simplified
  [x] Documentation updated
  [ ] Ticket closed (skipped - no PM tool)
  [x] Marker created

Exit Conditions:
  Heuristics: 4/5 (passed)
  EXIT_SIGNAL: true (passed)

Summary:
- {KEY_CHANGE_1}
- {KEY_CHANGE_2}
- {KEY_CHANGE_3}

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Execute autonomous completion protocol:

1. Commit changes (if not already)
2. Archive task documentation
3. Close ticket (if PM configured)
4. Create completion marker (with loop state)
5. Suggest compact

---

Setting EXIT_SIGNAL

The EXIT_SIGNAL is set explicitly by Claude when:

• All primary task requirements are met
• Code is functional and tested
• No obvious remaining work

How to signal completion (v2 JSON format):

{"v":2,"type":"exit","success":true,"reason":"All requirements met"}

The JSON format in a pilot-signal code block ensures unambiguous detection by Pilot automation. The reason field should briefly describe why the task is complete.

Signal fields:

• v: Version (always 2)
• type: Signal type (always "exit" for completion)
• success: Whether task completed successfully (true/false)
• reason: Brief explanation of completion state

This explicit declaration prevents premature exits when heuristics are met but work remains.

---

Phase Detection

Phases auto-detected based on context:

def detect_phase(context):
    # COMPLETE: Exit conditions met
    if indicators_met >= 4 and exit_signal:
        return "COMPLETE"

    # VERIFY: Tests running or recently run
    if context.tests_running or context.test_exit_code is not None:
        return "VERIFY"

    # IMPL: Files being modified
    if context.files_changed:
        return "IMPL"

    # RESEARCH: Reading files, searching
    if context.files_read and not context.files_changed:
        return "RESEARCH"

    # INIT: Default starting state
    return "INIT"

---

Integration with Navigator

With Autonomous Completion

Loop mode enhances (not replaces) the autonomous protocol:

• Completion indicators map to autonomous steps
• EXIT_SIGNAL triggers autonomous completion
• Marker includes loop state for restoration

With nav-simplify (v5.4.0+)

Simplification runs during VERIFY phase:

• After tests pass, before committing
• Configurable via simplification.enabled in .nav-config.json
• Adds code_simplified completion indicator
• Skip if no code changes (docs-only tasks)

With nav-diagnose

Stagnation triggers nav-diagnose quality check:

• 3 same-state loops = potential quality issue
• nav-diagnose helps identify root cause
• Re-anchoring can resolve stuck loops

With nav-marker

Markers capture loop state:

• Current iteration and max
• Phase at time of marker
• State hash for continuity
• Completion indicators status

With ToM Features

Loop mode respects ToM configuration:

• Verification checkpoints still apply in VERIFY phase
• Profile preferences affect communication style
• Belief anchors can help clarify stuck states

---

Predefined Functions

functions/status_generator.py

Generates formatted NAVIGATOR_STATUS block.

functions/exit_gate.py

Evaluates dual-condition exit (heuristics + explicit signal).

functions/stagnation_detector.py

Calculates state hash and detects consecutive same-states.

functions/phase_detector.py

Auto-detects current task phase from context.

---

Error Handling

Config not found:

Loop mode config not found in .nav-config.json.
Using defaults: max_iterations=5, stagnation_threshold=3

Function execution fails:

• Fall back to manual evaluation
• Log error but don't interrupt loop
• Continue with best-effort phase detection

User aborts mid-loop:

• Create partial completion marker
• Document progress made
• List remaining work

---

Success Criteria

Loop mode succeeds when:

• Task completes within max_iterations
• No stagnation pauses (or resolved quickly)
• EXIT_SIGNAL + heuristics both satisfied
• Completion marker includes loop state
• User sees clear progress each iteration

---

Examples

Example 1: Simple Feature

User: "Run until done: add isPrime function with tests"

Iteration 1 (INIT → RESEARCH):
  - Read existing math utils
  - Found test patterns

Iteration 2 (IMPL):
  - Created isPrime function
  - Created test file

Iteration 3 (VERIFY):
  - Ran tests: PASS
  - Committed changes

{"v":2,"type":"exit","success":true,"reason":"isPrime function implemented and tests passing"}

→ Loop complete in 3 iterations

Example 2: Stagnation Recovery

User: "Run until done: fix authentication bug"

Iteration 1-3 (IMPL):
  - Same changes attempted
  - Tests still failing
  - State hash unchanged

→ STAGNATION DETECTED

User: "The test needs a mock for the auth service"

Iteration 4 (IMPL):
  - Added mock
  - Tests pass

{"v":2,"type":"exit","success":true,"reason":"Auth bug fixed with mock service"}

→ Loop complete in 4 iterations

---

Limitations

Cannot handle:

• External blockers (waiting for API, permissions)
• Subjective completion criteria ("make it look nice")
• Tasks requiring human judgment mid-loop

Should not use for:

• Quick fixes (single iteration sufficient)
• Exploratory work (no clear completion state)
• Tasks with security implications (need human review)

---

This skill provides Ralph-style "run until done" capability while maintaining Navigator's context efficiency and ToM integration.