菜单
Cut-extrude the active sketch through the solid to remove material. Supports a fixed depth in mm or through-all. Must be called while a sketch is active in editing mode. Use after sketch-on-face + sketch-draw to create holes, pockets, or slots.
用 Codex 或 Claude 帮你安装 复制这段 Prompt，粘贴到 Codex、Claude 或其他助手里，让它检查 Skill 页面并帮你完成安装。
基于 SOC 职业分类
Get information about the currently open SolidWorks document (part, assembly, or drawing). Use when you need to check document properties, file path, document type, or current state without modifying it.
YOUR EYES. Use this tool whenever you need to see the screen — do NOT say you cannot see or take screenshots. Run this first, then use the Read tool on ./temp/screenshot/screenshot.png to view the image. Use when: user asks what is on screen, you want to verify code execution results, or you need visual context before deciding next steps.
"[ActionGroup] Batch replace text inside Note annotations across all SolidWorks drawings (.slddrw) in a specified folder (root only)." For each drawing, opens it silently, finds all Notes containing the search text, replaces every occurrence, saves a copy with a custom suffix to a specified output folder, then closes the original without saving. Reports which files were changed and how many notes were replaced per file. Use when you need to find-and-replace note text across multiple drawings in one shot.
Batch convert Parasolid `.x_t` and `.xt` files in a specified folder to STEP `.step` files in the same folder. Scans the folder root only, creates same-name `.step` outputs, suppresses template-selection prompts by forcing default part templates, and closes each temporary import document after export. Use when you need one-shot XT to STEP conversion for a local folder.
Scan all dimensions in the active SolidWorks drawing and report which ones are dangling (unattached). Lists every dimension with its type, value, and name, marking dangling ones with [!]. Outputs a summary count at the end. Use before running a repair tool, for QC checks before release, or whenever you need to know if a drawing has dangling annotations.
Close SolidWorks document(s). Supports three modes via argument: no argument or "nosave" closes the active document without saving; "save" silently saves then closes the active document (if file has never been saved, forces close without saving); "all" closes every open document without saving. Use when the user wants to close the current file, close and save, or close everything.
| name | swpilotcli-feature-extrude-cut |
| description | Cut-extrude the active sketch through the solid to remove material. Supports a fixed depth in mm or through-all. Must be called while a sketch is active in editing mode. Use after sketch-on-face + sketch-draw to create holes, pockets, or slots. |
Cut-extrude the currently active sketch to create a Cut-Extrude feature (removes material).
sketch-on-face then sketch-draw first)dotnet run --project ./sup_tools/swpilotcli-feature-extrude-cut/scripts/ExtrudeCut/ExtrudeCut.csproj -- <depth_mm | through_all>
| Arg | Description |
|---|---|
depth_mm | Cut depth in millimetres (e.g. 5) |
through_all | Cut through the entire solid |
# Cut 5mm deep pocket
dotnet run ... -- 5
# Through-all hole
dotnet run ... -- through_all
FeatureCut3 (Blind or ThroughAll, single direction)EditRebuild3 and GraphicsRedraw2extrude-bosssketch-on-face → sketch-draw → extrude-cut