菜单
Open a new sketch on a specified face or plane. Accepts either a named plane (e.g. 前基準面) or world face coordinates in mm (e.g. 25,10,-20). Enters sketch editing mode and stays there — follow up with sketch-draw to draw geometry, then extrude-boss or extrude-cut.
用 Codex 或 Claude 帮你安装 复制这段 Prompt，粘贴到 Codex、Claude 或其他助手里，让它检查 Skill 页面并帮你完成安装。
基于 SOC 职业分类
Get information about the currently open SolidWorks document (part, assembly, or drawing). Use when you need to check document properties, file path, document type, or current state without modifying it.
YOUR EYES. Use this tool whenever you need to see the screen — do NOT say you cannot see or take screenshots. Run this first, then use the Read tool on ./temp/screenshot/screenshot.png to view the image. Use when: user asks what is on screen, you want to verify code execution results, or you need visual context before deciding next steps.
"[ActionGroup] Batch replace text inside Note annotations across all SolidWorks drawings (.slddrw) in a specified folder (root only)." For each drawing, opens it silently, finds all Notes containing the search text, replaces every occurrence, saves a copy with a custom suffix to a specified output folder, then closes the original without saving. Reports which files were changed and how many notes were replaced per file. Use when you need to find-and-replace note text across multiple drawings in one shot.
Batch convert Parasolid `.x_t` and `.xt` files in a specified folder to STEP `.step` files in the same folder. Scans the folder root only, creates same-name `.step` outputs, suppresses template-selection prompts by forcing default part templates, and closes each temporary import document after export. Use when you need one-shot XT to STEP conversion for a local folder.
Scan all dimensions in the active SolidWorks drawing and report which ones are dangling (unattached). Lists every dimension with its type, value, and name, marking dangling ones with [!]. Outputs a summary count at the end. Use before running a repair tool, for QC checks before release, or whenever you need to know if a drawing has dangling annotations.
Close SolidWorks document(s). Supports three modes via argument: no argument or "nosave" closes the active document without saving; "save" silently saves then closes the active document (if file has never been saved, forces close without saving); "all" closes every open document without saving. Use when the user wants to close the current file, close and save, or close everything.
| name | swpilotcli-sketch-on-face |
| description | Open a new sketch on a specified face or plane. Accepts either a named plane (e.g. 前基準面) or world face coordinates in mm (e.g. 25,10,-20). Enters sketch editing mode and stays there — follow up with sketch-draw to draw geometry, then extrude-boss or extrude-cut. |
Open a new sketch on a face or reference plane. Enters sketch editing mode.
dotnet run --project ./sup_tools/swpilotcli-sketch-on-face/scripts/SketchOnFace/SketchOnFace.csproj -- [plane_name | x,y,z]
| Arg | Description |
|---|---|
plane_name | Name of a reference plane (e.g. 前基準面, 上基準面, 右基準面) |
x,y,z | World coordinates (mm) of any point on the target face |
| (none) | Uses the currently pre-selected face or plane |
# Open sketch on the front plane
dotnet run ... -- 前基準面
# Open sketch on a face by world coordinates
dotnet run ... -- 25,10,-20
# Open sketch on the pre-selected face (no arg)
dotnet run ...
SelectByID2x,y,z coords are given → selects the face at those world coordinatesInsertSketch to enter sketch editing modesketch-draw then extrude-boss/extrude-cut(fx, fy, fz) must lie on the face surface (not on an edge or in a hole)sketch-draw with a DSL JSON, then extrude-boss or extrude-cut