motor-pmsm-base

name	motor-pmsm-base
description	PMSM Simulation Modeling Base — entry-point skill for building three-phase voltage-source-inverter-driven PMSM (SPMSM/IPMSM) control simulations in Simulink. Provides plant build standard, dq frame conventions, building blocks library SOP, sanity-check templates, broken-FOC defense checklist, and visual review standards. Method-specific skills (motor-fcs-mpc / motor-dtc-pmsm / motor-smc-pmsm) layer their control law on this base. Use when starting a new PMSM control method study, designing a build script skeleton, or debugging broken-FOC symptoms (motor stalled, abc DC-locked). Skip for non-PMSM motors (induction / BLDC / SRM) or pure theory questions.
metadata	{"version":"1.0"}

motor-pmsm-base — PMSM Simulation Modeling Base

Reusable plant + frame conventions + building blocks + sanity-check templates + broken-FOC defense + visual review standards for three-phase voltage-source-inverter-driven PMSM (SPMSM / IPMSM via parameterization). Method-specific control laws (FOC / FCS-MPC / DTC / SMC / sensorless / observer / MTPA / weak-field) layer on top of this base.

Must-Follow Rules

• Use shared/* assets, do not duplicate. shared/formulas/pmsm_formulas.md has signed-off plant equations and control law derivations. shared/building_blocks/ provides verified atomic blocks. Reference them by path; do not re-derive or copy content.
• Run pre-build sanity grid before any build. See references/pre_build_grid.md. Fail-fast when Vdc/BEMF tight, Goto TagVisibility default-local, FF dimensional incorrect, or sector=7 startup unhandled.
• Visual 4-check before trusting numerical metrics: motor rotates / iq tracks reference / abc AC sinusoidal / Te energy balance. If any check fails, fix the implementation before computing 5-metric scores.
• Layout gate after build (MANDATORY, not advisory — prevents silent skip): block_overlaps==0 is a HARD self-test (T7; build fails otherwise) + a mandatory human screenshot sign-off (same human-in-loop model as the Visual 4-check). Line-line crossings and line-through-block hits are SOFT (reported, NEVER numeric-gated): non-planar signal graphs (K3,3/K5) cannot reach zero crossings on a 2-D plane (Kuratowski), so reach zero only by restructuring (Subsystem encapsulation / Goto/From), never by hard-gating a count. See references/measurement_logger.md.
• One-click reproducibility: model must Run from .slx double-click without prior script execution. Inject all parameters via set_param(mdl, 'InitFcn', ...).
• Don't guess conventions. dq is amplitude-invariant (factor 2/3); Anti_Park's internal From "The" requires Goto_The TagVisibility='global'. See references/plant_modeling.md and references/building_blocks.md.
• PMSM block RefAngle must be 'Aligned with phase A axis (original Park)'. R2024b sps_lib default is '90 degrees behind phase A axis (modified Park)', which rotates the plant dq frame 90° relative to the chart Park convention — a silent failure mode (motor drifts to wrong operating point, abc non-clean sinusoidal, id large drift, iq cannot track iq_ref). Either copy PMSM from shared/building_blocks/pmsm_blocks.slx (pre-set), or set_param([mdl '/PMSM'], 'RefAngle', 'Aligned with phase A axis (original Park)'). DTC αβ-frame methods exempt. See references/broken_foc_diagnostics.md F-CRIT 6.

Build Flow

Phase	Action	Reference
0	Validate params + sanity grid	pre_build_grid.md
1	Theory anchor (sign or AI-self-audit formulas)	theory_anchor.md
2	PMSM plant + InitFcn injection	plant_modeling.md
3	Building blocks (Park / Clarke / Anti_Park / SVPWM)	building_blocks.md
4	Control loop	method-specific skill
5	Modulation (FOC-based methods only; DTC skips)	building_blocks.md
6	Measurement + Logger	measurement_logger.md
7	Sanity check + Visual 4-check	sanity_visual.md
8	Solver + layout gate (T7 zero-overlap + screenshot sign-off) + save	measurement_logger.md
9	Idempotent self-tests	measurement_logger.md

If broken-FOC symptoms appear (motor stuck, abc DC-locked, iq permanently bang-bang), jump to broken_foc_diagnostics.md.

When to Use

✅ Use this skill	❌ Skip
Starting a new PMSM control method study (sensorless, DTC-SVM, MP-DTC, deadbeat, MTPA, weak-field)	Non-PMSM motors (induction / BLDC trapezoidal / SRM / DC)
Designing your build script (conventionally named build_template.m) for a PMSM method	Pure theory questions (dq frame, Park transform math)
Broken-FOC debugging (motor stalled, abc DC-locked, iq saturated)	Method already covered by motor-fcs-mpc / motor-dtc-pmsm / motor-smc-pmsm (use the specific skill)
Need Phase 1.5 theory-anchor or Phase 4.5 sanity-check templates	MATLAB performance tuning (use matlab-performance-optimizer) or unit tests (use matlab-test-creator)

Known Limitations

• PMSM only (SPMSM / IPMSM). Induction motor / BLDC trapezoidal / SRM / DC are different plants.
• dq amplitude-invariant convention. Power-invariant requires extension.
• Three-phase 2-level VSI. Multilevel inverter / matrix converter out of scope.
• Nominal parameters. No robust / adaptive / online parameter ID.
• Ideal sensors. No encoder quantization or current sampling delay.
• No fault tolerance, no multi-motor coordination.

Method-specific Skills (Layered on This Base)

Skill	Method
motor-fcs-mpc	Single-vector finite-control-set MPC current control
motor-dtc-pmsm	Direct Torque Control with hysteresis switching table (Takahashi / Sutikno 6-state)
motor-smc-pmsm	Sliding Mode Control speed-loop (PD-type sliding + super-twisting)

External References

• Krause, Wasynczuk, Sudhoff (2013). Analysis of Electric Machinery and Drive Systems — PMSM dq modeling reference.
• Bose (2002). Modern Power Electronics and AC Drives — VSI + SVPWM reference.
• Slotine, Li (1991). Applied Nonlinear Control — Lyapunov-based design reference.