菜单
Control vehicle with natural language. Use when user wants to warm up/cool down the car, lock/unlock doors, start/stop engine, check battery/fuel/location/status, or control charging. Translates phrases like "warm up the car" into mcs CLI commands.
用 Codex 或 Claude 帮你安装 复制这段 Prompt，粘贴到 Codex、Claude 或其他助手里，让它检查 Skill 页面并帮你完成安装。
| name | mcs-control |
| description | Control vehicle with natural language. Use when user wants to warm up/cool down the car, lock/unlock doors, start/stop engine, check battery/fuel/location/status, or control charging. Translates phrases like "warm up the car" into mcs CLI commands. |
Translates natural language vehicle control requests into mcs CLI commands.
| Natural Language | Command |
|---|---|
| "warm up the car", "heat the car", "turn on heating" | mcs climate on |
| "cool down the car", "turn on AC", "start the AC" | mcs climate on |
| "set temperature to X", "make it X degrees" | mcs climate set --temp X |
| "turn off climate", "stop heating", "turn off AC" | mcs climate off |
| "defrost the windshield", "turn on defrosters" | mcs climate set --front-defroster |
| Natural Language | Command |
|---|---|
| "lock the car", "lock the doors", "lock it" | mcs lock |
| "unlock the car", "unlock the doors", "open the locks" | mcs unlock |
| Natural Language | Command |
|---|---|
| "start the car", "start the engine", "turn on the car" | mcs start |
| "stop the engine", "turn off the car", "kill the engine" | mcs stop |
| Natural Language | Command |
|---|---|
| "start charging", "charge the car", "plug it in" | mcs charge start |
| "stop charging", "stop the charge" | mcs charge stop |
| Natural Language | Command |
|---|---|
| "what's the status", "show status", "how's the car" | mcs status |
| "check the battery", "battery level", "how much charge" | mcs status (show battery section) |
| "check fuel", "fuel level", "how much gas" | mcs status (show fuel section) |
| "where is my car", "find my car", "car location" | mcs status (show location) |
| "check tire pressure", "how are the tires" | mcs status (show tires section) |
| "are the doors locked", "door status" | mcs status (show doors section) |
Control commands support --confirm to wait for vehicle confirmation:
--confirm - Wait for vehicle to report state change (default: enabled)--confirm=false - Don't wait for confirmation--confirm-wait 3m - Custom timeout (default: 2 minutes)Use --confirm for important actions where the user wants to be sure it worked.
User: "It's freezing, can you warm up the car?"
mcs climate on
User: "How much battery do I have left?"
mcs status
Then show the battery level and range from the output.
User: "Lock the car and make sure it's locked"
mcs lock --confirm
User: "Set the car to 24 degrees"
mcs climate set --temp 24
For programmatic access, add --json flag to status:
mcs status --json