用 Codex 或 Claude 帮你安装 复制这段 Prompt,粘贴到 Codex、Claude 或其他助手里,让它检查 Skill 页面并帮你完成安装。
直接命令不会经过审查 Prompt;运行前请先检查来源。
npx skills add https://github.com/CyberStrikeus/CyberStrike --skill cis-ubuntu1204-v110-7-2-7命令会保持在同一行。复制前请横向滚动并检查完整内容。
想先保存到本地?可下载 SkillsMP 当前能够提供的文件。
基于 SOC 职业分类
正在显示 SKILL.md
| name | cis-ubuntu1204-v110-7-2-7 |
| description | Enable RFC-recommended Source Route Validation |
| category | cis-os-hardening |
| version | 1.1.0 |
| author | cyberstrike-official |
| tags | ["cis","ubuntu",12.04,"linux","networking","reverse-path","rp-filter","sysctl","host-router"] |
| cis_id | 7.2.7 |
| cis_benchmark | CIS Ubuntu 12.04 LTS Server Benchmark v1.1.0 |
| tech_stack | ["ubuntu","linux"] |
| cwe_ids | [] |
| chains_with | [] |
| prerequisites | [] |
| severity_boost | {} |
Setting net.ipv4.conf.all.rp_filter and net.ipv4.conf.default.rp_filter to 1 forces the Linux kernel to utilize reverse path filtering on a received packet to determine if the packet was valid. Essentially, with reverse path filtering, if the return packet does not go out the same interface that the corresponding source packet came from, the packet is dropped (and logged if log_martians is set).
Setting these flags is a good way to deter attackers from sending your server bogus packets that cannot be responded to. One instance where this feature breaks down is if asymmetrical routing is employed. This would occur when using dynamic routing protocols (bgp, ospf, etc) on your system. If you are using asymmetrical routing on your server, you will not be able to enable this feature without breaking the routing.
Perform the following to determine if RFC-recommended source route validation is enabled.
/sbin/sysctl net.ipv4.conf.all.rp_filter
/sbin/sysctl net.ipv4.conf.default.rp_filter
net.ipv4.conf.all.rp_filter = 1
net.ipv4.conf.default.rp_filter = 1
Set the net.ipv4.conf.all.rp_filter and net.ipv4.conf.default.rp_filter parameters to 1 in /etc/sysctl.conf:
net.ipv4.conf.all.rp_filter=1
net.ipv4.conf.default.rp_filter=1
Modify active kernel parameters to match:
/sbin/sysctl -w net.ipv4.conf.all.rp_filter=1
/sbin/sysctl -w net.ipv4.conf.default.rp_filter=1
/sbin/sysctl -w net.ipv4.route.flush=1
Reverse path filtering is disabled by default.
Level 1 - Scored