用 Codex 或 Claude 帮你安装 复制这段 Prompt，粘贴到 Codex、Claude 或其他助手里，让它检查 Skill 页面并帮你完成安装。
直接命令不会经过审查 Prompt；运行前请先检查来源。
npx skills add https://github.com/CyberStrikeus/CyberStrike --skill cis-ubuntu1604-v200-3-1-1命令会保持在同一行。复制前请横向滚动并检查完整内容。
想先保存到本地？可下载 SkillsMP 当前能够提供的文件。
基于 SOC 职业分类
正在显示 SKILL.md
| name | cis-ubuntu1604-v200-3-1-1 |
| description | Disable IPv6 |
| category | cis-networking |
| version | 2.0.0 |
| author | cyberstrike-official |
| tags | ["cis","ubuntu","linux","ubuntu-16.04","networking"] |
| cis_id | 3.1.1 |
| cis_benchmark | CIS Ubuntu Linux 16.04 LTS Benchmark v2.0.0 |
| tech_stack | ["ubuntu","linux"] |
| cwe_ids | [] |
| chains_with | [] |
| prerequisites | [] |
| severity_boost | {} |
Although IPv6 has many advantages over IPv4, not all organizations have IPv6 or dual stack configurations implemented.
If IPv6 or dual stack is not to be used, it is recommended that IPv6 be disabled to reduce the attack surface of the system.
If IPv6 is disabled through sysctl config, SSH X11forwarding may no longer function as expected. We recommend that SSH X11fowarding be disabled, but if required, the following will allow for SSH X11forwarding with IPv6 disabled through sysctl config:
Add the following line the /etc/ssh/sshd_config file:
AddressFamily inet
Run the following command to re-start the openSSH server:
systemctl restart sshd
Run one of the following commands to verify IPv6 is disabled:
IF IPv6 is disabled through grub:
Run the following command:
grep "^\s*linux" /boot/grub/grub.cfg | grep -v "ipv6.disable=1"
No lines should be returned.
OR
IF IPv6 is disabled through sysctl settings:
Run the following commands:
sysctl net.ipv6.conf.all.disable_ipv6
sysctl net.ipv6.conf.default.disable_ipv6
grep -E '^\s*net\.ipv6\.conf\.(all|default)\.disable_ipv6\s*=\s*1\b(\s+#.*)?$' /etc/sysctl.conf /etc/sysctl.d/*.conf | cut -d: -f2
For grub method: no lines should be returned.
For sysctl method:
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 = 1
And the grep should return:
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 = 1
Use one of the two following methods to disable IPv6 on the system:
To disable IPv6 through the GRUB2 config:
Edit /etc/default/grub and add ipv6.disable=1 to the GRUB_CMDLINE_LINUX parameters:
GRUB_CMDLINE_LINUX="ipv6.disable=1"
Run the following command to update the grub2 configuration:
update-grub
OR
To disable IPv6 through sysctl settings:
Set the following parameters in /etc/sysctl.conf or a /etc/sysctl.d/* file:
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 = 1
Run the following commands to set the active kernel parameters:
sysctl -w net.ipv6.conf.all.disable_ipv6=1
sysctl -w net.ipv6.conf.default.disable_ipv6=1
sysctl -w net.ipv6.route.flush=1
IPv6 is enabled by default.
Version 7
9.4 Apply Host-based Firewalls or Port Filtering - Apply host-based firewalls or port filtering tools on end systems, with a default-deny rule that drops all traffic except those services and ports that are explicitly allowed.
Manual