verify

name	verify
description	Build-verify e-Rex firmware changes in a cloud session (no hardware attached).

Verifying e-Rex changes

The real surface is a physical M5Paper S3 e-ink panel flashed over USB — unreachable from a cloud session. The closest reachable handle is a full firmware build:

pip install platformio    # pio is not preinstalled in remote sessions
pio run                   # ~3 min first run (downloads ESP32-S3 toolchain), then fast

A clean link plus stable RAM/Flash percentages (baseline ~16.6% RAM / ~51% Flash) is the strongest evidence available here. Anything touching rendering, touch, BLE, or EPD refresh behavior still needs on-hardware confirmation by the user — say so explicitly in the report.

Gotchas:

• pio run output is huge; pipe through tail -40.
• There are no automated tests or linters in this repo (per CLAUDE.md).