walk-the-issues

name

walk-the-issues

description

This skill should be used when the user asks to "walk the issues", "work through github issues", "groom and implement issues", "tackle the issue backlog", "start the issue loop", "go through tickets", "work all open issues", "clear the backlog", "process all tickets", or "close out open issues". Orchestrates an end-to-end workflow: groom all open GitHub issues with subagents, then loop through them one-by-one — branching, researching, implementing with swarms, testing, committing, merging, and creating PRs until all issues are complete.

Walk the Issues

Orchestrate a full end-to-end GitHub issue grooming and implementation workflow. This skill drives two sequential phases: Grooming (analyze all open issues for clarity and completeness), then Implementation Loop (branch → research → swarm implement → test → PR → repeat).

---

Phase 1: Grooming

Before touching any code, groom every open issue so the implementation loop only encounters well-specified work. Closed issues are skipped entirely — do not re-open or re-analyze them.

Grooming Setup

# Ensure gh CLI is authenticated for your target account
# gh auth switch --user YOUR_GITHUB_USERNAME  # Uncomment if needed
gh issue list --state open --json number,title,labels,body,assignees --limit 200

Spawn Grooming Subagents

For each open issue, spawn a read-only Explore subagent (no worktree needed) to analyze it. Run subagents in parallel batches of 4-6.

Each grooming subagent evaluates:

1. Already addressed? — Search the codebase for evidence the issue has already been fixed or implemented. Check recent commits, PR history, and relevant source files. If the work is already done, mark the issue already-resolved and it will be closed (see Apply Grooming Results below).
2. Clarity — Is the problem statement unambiguous?
3. Acceptance criteria — Are "done" conditions explicit?
4. Scope — Is the issue atomic (one concern only)?
5. Blockers — Does it depend on another issue?
6. Labels — Does it have appropriate labels (bug, enhancement, chore)?
7. Effort signal — Rough size (small/medium/large)?

Each subagent outputs its findings to docs/investigations/issue-{number}-grooming.md.

Apply Grooming Results

After subagents complete, the top-level agent applies grooming changes:

• Close already-resolved issues with a comment explaining what existing code/commit addresses it:

  gh issue comment {number} --body "Closing — this has already been addressed in {commit/file/PR}. ..."
  gh issue close {number}
  

• Add labels: well-specified, needs-clarification, blocked, small, medium, large
• Post a comment on unclear issues asking for clarification
• Close duplicates with a reference to the canonical issue
• Update issue body with structured acceptance criteria if missing

# Label example
gh issue edit {number} --add-label "well-specified,small"

# Comment example
gh issue comment {number} --body "Needs clarification: ..."

Only issues labeled well-specified (and still open) enter the implementation loop.

---

Phase 2: Implementation Loop

Repeat until all well-specified open issues have associated PRs.

Step 1 — Select Next Issue

gh issue list --state open --label "well-specified" --json number,title,labels --limit 1

Pick the lowest-numbered unhandled issue. If none remain, the loop is complete — report a summary and stop.

Step 2 — Create a Working Branch

ISSUE_NUM={number}
SLUG=$(echo "{title}" | tr '[:upper:]' '[:lower:]' | sed 's/[^a-z0-9]/-/g' | cut -c1-40)
BRANCH="issue-${ISSUE_NUM}-${SLUG}"
git checkout main && git pull upstream main
git checkout -b "$BRANCH"

All work for this issue happens on $BRANCH. Never commit directly to main.

Step 3 — Research and Planning

Spawn read-only Explore subagents (no worktree needed) to produce a structured implementation plan. These subagents should:

1. Read the issue body, comments, and any referenced files
2. Explore the relevant codebase sections
3. Identify all files likely to change
4. Use Context7 to fetch documentation for any unfamiliar libraries or tools:

   Use context7 to look up: {library or tool name}
   

5. Identify existing tests covering affected code
6. Output plan to docs/plans/issue-{number}-plan.md using the project plan template

Plan must include:

• Summary of changes required
• Files to create/modify
• Testing strategy (unit + regression)
• Risk areas / edge cases
• Commit strategy (what logical commits to make)
• Library Research section (context7 findings, if any)

Step 4 — Regression Tests First

Before implementing, write regression tests for every code path that will change.

Spawn a general-purpose subagent with worktree isolation to:

1. Read docs/plans/issue-{number}-plan.md
2. Identify existing test files covering affected areas
3. Add regression tests that will fail until the implementation is correct
4. Commit the failing tests:

   git add <specific test files>
   git commit -m "test(#{number}): add regression tests for {area}"
   

This ensures the test suite is red before implementation begins.

Step 5 — Implement with Swarms

Use a swarm (2–4 agents in parallel per wave) for implementation. Each agent works in its own worktree (isolation: "worktree").

Review Policy — This project is internal software under the user's control, not deployed in an adversarial environment. The default swarm skill requires 3 consecutive passing reviews across Security/UX/Correctness perspectives. That is not required here. A single round of review is sufficient. The hard requirements are:

1. All tests pass (go test ./... + -race)
2. Regression tests are written for every changed code path
3. New functionality has unit tests
4. Coverage gate holds (80% minimum)

Only escalate to multi-round review if the change touches security-sensitive code (auth, permissions, token handling) or concurrent shared state. When in doubt, do one review and move on.

Commit discipline inside worktrees:

• Commit after each logical unit of work (not just at the end)
• Commit message format: feat(#{number}): {what changed}
• Stage specific files — never git add -A

After each wave:

1. Merge worktrees back to $BRANCH:

   git checkout "$BRANCH"
   git merge --no-ff {worktree-branch}
   git worktree remove {worktree-path}
   git branch -d {worktree-branch}
   

2. Resolve any conflicts
3. Commit the merge: git commit -m "chore(#{number}): merge wave-{n} to branch"
4. Run tests to verify green state before next wave

Step 6 — Run Tests

After all implementation waves are merged:

go test ./...
go test ./... -race
./scripts/test-regression.sh

All tests must pass. If any fail:

• Spawn a debug subagent to identify the root cause
• Fix in a new commit on $BRANCH
• Re-run until clean

Step 7 — New Tests for New Functionality

For any new functions, types, or behaviors added during implementation, spawn a subagent to:

1. Identify new public APIs and behaviors introduced
2. Write unit tests and integration tests for new functionality
3. Ensure coverage gate is maintained (80% minimum)
4. Commit: test(#{number}): add tests for new functionality

Run the full suite again to confirm everything is green.

Step 8 — Document Issues

If anything unexpected occurred during implementation (surprising behavior, edge cases discovered, architectural constraints, deferred work), append an entry to docs/logs/engineering-log.md.

Use the log format defined in references/implementation-loop-detail.md#engineering-log-format.

File new GitHub issues for any deferred work discovered.

Step 9 — Create PR

Use the PR body template from references/implementation-loop-detail.md#pr-body-template.

gh pr create \
  --title "fix/feat(#{number}): {issue title}" \
  --body "$(cat <<'EOF'
{paste from references/implementation-loop-detail.md PR body template}
EOF
)" \
  --base main \
  --head "$BRANCH"

Step 10 — Mark Ticket Handled

gh issue edit {number} --add-label "pr-created"
gh issue comment {number} --body "PR created: {pr-url}"

Do not close the issue — the PR merge will close it via the "Closes #N" reference.

Step 11 — Loop

Return to Step 1 and select the next well-specified open issue.

---

Loop Completion

When no well-specified open issues remain:

1. Print a summary: issues handled, PRs created, issues skipped (needs-clarification)
2. List any issues filed for deferred work
3. Report Task status: DONE

---

Commit Discipline (Summary)

When	What to commit	Format
After writing regression tests	Test files only	test(#{N}): add regression tests for {area}
After each worktree wave	Merge commit	chore(#{N}): merge wave-{n} to branch
After implementation units	Specific changed files	feat(#{N}): {what} or fix(#{N}): {what}
After new functionality tests	Test files	test(#{N}): add tests for new functionality

Never commit directly to main. Never use git add -A. Always stage specific files.

---

Additional Resources

• references/grooming-detail.md — Detailed grooming rubric and label taxonomy
• references/implementation-loop-detail.md — Edge cases, merge conflict handling, worktree cleanup

See also: swarm skill (for spawning implementation waves), context7 (for library docs), code-review skill (for optional external review — one round is sufficient for this project).