enable

name	enable
description	Build one slice at a time with red-before-green tests at the agreed seams and tight feedback loops. Use when a tracked piece of work is at its enablement stage and a slice needs building.
argument-hint	a work slug to coordinate all slices, or 'slug, slice N' to build one

Enablement

The genius of doing the work the work needs. Its failure mode is flying blind: code produced without feedback until a big-bang reveal at the end. Enablement keeps the loop tight — every few minutes, reality gets a vote.

Run the genius-file skill: read the work file. Galvanizing's gate must be fully checked (or skipped, recorded) before this stage begins — count the boxes, don't skim. Unchecked boxes but the file records the user's approval? That's housekeeping the approving session forgot: repair the boxes, note it in the build log, proceed. Unchecked and genuinely unsatisfied? Stop and surface it — building through an open gate is how "the agent rushed ahead" comes back.

Who builds

Decide your role from the invocation:

• A specific slice named ("slug, slice N") → you are the builder: build that one slice by the loop below.
• Only the work named, multiple slices, subagents available → you are the coordinator: dispatch each slice to a fresh subagent, in dependency order. Hand each subagent the work file path and its slice number — never a pasted summary of earlier slices; the work file and build log are the whole handoff (a summary would anchor it on your reading and rot as slices land). When a subagent returns: read its build-log entry, re-run the slice's tests fresh yourself, and confirm the criteria boxes against that output before dispatching the next — a subagent's word is not evidence. Unblocked slices touching disjoint areas may run in parallel (separate worktrees); when in doubt, sequential. You never write product code — coordinating and building don't share a context.
  • Coordinating means staying awake. Never end your turn while a builder you must verify is still running — "I'll wait for it to return", followed by ending the turn, is the stall, not a wait (measured: three identical stalls, hours lost). If your own context is a subagent — or you can't be certain the harness re-wakes a stopped agent when its child finishes — dispatch builders synchronously (foreground) so the result arrives in-turn. And dispatching is doing: "next I'll dispatch slice N" ends with slice N dispatched, not announced.
• No subagents, or the user wants to drive each slice → fresh session per slice: tell the user to open one and say /enable <slug>, slice N.

Either way, each slice is built inside a fresh context — that's the point: the work file carries the work so no context has to.

Check CLAUDE.md / AGENTS.md for pinned verify commands (typecheck, test, lint) — in a ## Working Genius section or plainly stated anywhere else — and use them exactly. Otherwise discover them from the project's task runner once, and reuse all session. If a verify command's baseline is already dirty (pre-existing failures), record the baseline in the build log and hold the line at no new failures — don't adopt the dirt, don't silently fix unrelated code.

The loop

Build the slice through red → green cycles at the seams agreed in Galvanizing:

1. Red first. Write one failing test at the agreed seam for the next bit of behavior. Run it. Watch it fail — a test you never saw red proves nothing.
2. Green minimally. Write just enough code to pass. No speculative parameters, no hooks for imagined futures — the acceptance criteria are the whole spec.
3. Typecheck after each green (and lint if the project has it fast).
4. Repeat until the slice's acceptance criteria are covered.

Rules that hold every cycle:

• Test behavior, not implementation. Assert through the seam's public interface; expected values come from an independent source (a known literal, a worked example), never recomputed the way the code computes them. A test that breaks under refactor while behavior held is testing the wrong thing.
• One slice at a time. Adjacent slices' code is out of bounds, however tempting.
• Mock only at system boundaries (third-party APIs, time, randomness) — never your own modules.
• Some criteria can't be red-green — a visual tweak, a config change, a docs page. Don't force a ceremonial test: verify by running/looking at the real thing and record what you observed in the build log. The rule is feedback every few minutes, not tests for their own sake.
• Speak the project's language. If CONTEXT.md exists, test names and interface vocabulary follow it.

When the plan meets reality and loses

If the design doesn't survive contact with the code — the seam is wrong, a criterion is unbuildable, a dependency lied — don't silently improvise. Enablement responds to what the work actually needs: surface the problem, propose the adjustment, record the change in the work file (plan changes are decisions too), then continue. A quiet workaround today is an unexplainable diff next month.

The plan being silent is the same case in miniature: a value, contract, or ordering the plan never fixed. If the user is reachable, ask (with a recommendation). If not — whatever the mode — adopt your recommended answer and record it as assumed: in the Enablement section, flagged for review at next contact. Never let a silent gap become an invisible convention.

Closing a slice

• Run the slice's tests plus the tests of anything it touched; read the output.
• Check off the slice's acceptance criteria only against real command output.
• Append to the build log: what landed, every convention you introduced (injection mechanisms, error orderings, body shapes, test-setup idioms — the things the next session would otherwise reverse-engineer from code), and known untested edges. The next session reads this instead of your mind.
• Commit the slice, work-file update included (message: what behavior landed). A slice that only exists in the working tree dies with the session; Tenacity reviews and can still reshape history, but every closed slice deserves to survive a crash.

More unblocked slices → as coordinator, dispatch the next; as builder, report done and name the next slice. All slices built → check the Enablement gate below in the work file, set stage: tenacity, and tell the user: next is /tenacity.

Gate — Enablement

• Every slice built, red-before-green at the agreed seams (recorded exceptions — (verify) criteria, observed-not-tested checks — allowed)
• Every acceptance criterion checked against real output
• Every plan deviation and assumed: recorded in the work file