onboarding

name

onboarding

description

Agent-driven onboarding guide for CircleCI. Walks a user through the full setup journey: account creation, org setup, GitHub App connection, project creation, pipeline definition + trigger, and iterating a config file until it passes. Use this skill whenever a user says "onboard to CircleCI", "set up CircleCI", "get started with CircleCI", "connect my repo to CircleCI", "create a CircleCI project", or asks for help with any early CircleCI setup step. Also trigger if the user has a new repo and wants CI running on it.

CircleCI Onboarding

Guide the user through setting up CircleCI from scratch. Work through the stages below in order. At each stage, use AskUserQuestion to collect structured input rather than asking in prose — this keeps the flow crisp and unambiguous. Run CLI commands to verify state before asking questions you can answer yourself. Skip stages that are already complete.

---

Stage 0: Check prerequisites

First, verify the CLI version:

circleci version

Extract the version number from the output (e.g. circleci 0.1.2+... → 0.1.2). If the major version is 0 (i.e. below 1.0.0), stop and tell the user:

"This onboarding flow requires CircleCI CLI version 1.0.0 or later. Your installed version is <version>. Please upgrade with:

brew tap circleci-public/homebrew-circleci
brew remove circleci
brew install --cask circleci@next
```"

Do not proceed past this stage if the version check fails.

Then run circleci auth me before asking anything. If it returns a user, skip Stage 1 and note the username.

---

Stage 1: Account

If not authenticated, ask:

AskUserQuestion(
  "Are you new to CircleCI or do you already have an account?",
  header: "Account",
  options: [
    { label: "New — create an account", description: "Open signup in browser via circleci auth signup" },
    { label: "Existing — log in",        description: "Open login in browser via circleci auth login" }
  ]
)

Then run the appropriate command and verify with circleci auth me.

---

Stage 2: Org

Ask:

AskUserQuestion(
  "Which CircleCI org do you want to use?",
  header: "Organization",
  options: [
    { label: "Use an existing org",  description: "I'll provide the org slug" },
    { label: "Create a new org",     description: "I'll walk you to app.circleci.com/organization-setup" }
  ]
)

• Existing: Ask for the slug via a follow-up text input (e.g. gh/myorg or circleci/<uuid>). Found at Organization Settings → Organization slug.
• New: Direct to https://app.circleci.com/organization-setup, wait for confirmation, then ask for the resulting slug.

Note the org slug — it's needed in every subsequent stage.

---

Stage 3: GitHub App connection

Run circleci project list silently. If it returns repositories, the GitHub App is already connected — skip to Stage 4.

If the list is empty or errors, ask:

AskUserQuestion(
  "Has the CircleCI GitHub App been installed on your GitHub org?",
  header: "GitHub App",
  options: [
    { label: "Yes, already installed", description: "Repos should be visible in CircleCI" },
    { label: "No, need to install it", description: "I'll guide you through the installation" }
  ]
)

For installation: direct to https://app.circleci.com/settings/organization/<vcs>/<orgname>/vcs, tell them to install the GitHub App and grant access to relevant repos, then confirm by running circleci project list again.

---

Stage 4: Project

Ask:

AskUserQuestion(
  "Which repository do you want to set up CI for?",
  header: "Repository",
  options: [
    { label: "A repo already in CircleCI (follow existing)", description: "circleci project follow" },
    { label: "A new repo (create project)",                  description: "circleci project create" }
  ]
)

For a new project, ask the repo name (default to current directory name if in a git repo), then:

circleci project create <repo-name> --org <org-slug> --json

Then link the local checkout:

circleci project link
circleci project get --json   # verify and capture project UUID

Save the project slug (e.g. gh/myorg/myrepo) and id (UUID).

---

Stage 5: Pipeline definition + trigger

You need the GitHub repo's numeric ID. Try:

gh api /repos/<owner>/<repo> --jq .id 2>/dev/null

If gh isn't available or fails, ask the user to provide it (it's the number in github.com/<owner>/<repo> → Settings → General, shown as "Repository ID").

Ask which trigger preset to use, then immediately create both the definition and trigger without any further confirmation:

AskUserQuestion(
  "What events should trigger this pipeline?",
  header: "Trigger",
  options: [
    { label: "All pushes + PRs (recommended)", description: "all-pushes preset — runs on every push to any branch and PR events" },
    { label: "Pull requests only",             description: "only-open-prs — runs on PR open/update" },
    { label: "Default branch only",            description: "default-branch-pushes — runs only on pushes to main/master" },
    { label: "All pushes",                     description: "all-pushes — runs on every push to any branch" }
  ]
)

Map the choice to --event-preset:

• "All pushes + PRs" → all-pushes
• "Pull requests only" → only-open-prs
• "Default branch only" → default-branch-pushes
• "All pushes" → all-pushes

Then immediately (no further confirmation needed):

# Create pipeline definition
circleci pipeline create \
  --project <project-slug> \
  --name "main" \
  --config-provider github_app \
  --config-repo-id <github-repo-id> \
  --config-file .circleci/config.yml \
  --checkout-provider github_app \
  --checkout-repo-id <github-repo-id> \
  --json

# Create trigger
circleci project trigger create \
  --pipeline-definition-id <definition-id> \
  --repo-id <github-repo-id> \
  --event-preset <chosen-preset> \
  --json

Save the pipeline definition id. Proceed directly to Stage 6.

---

Stage 6: Config — create and iterate until green

6a — Config file

Check if .circleci/config.yml already exists. If not, auto-generate it without asking — do not prompt the user for a config strategy:

circleci config generate

Then always validate:

circleci config validate

Fix any validation errors before proceeding.

Important: Before using npm test as a build step, check package.json for a "test" script. If it's missing, use npm run build instead (common for Next.js and other frontend-only projects with no test suite).

6b — Commit, push, and run

Do all of this automatically without waiting for user confirmation:

git add .circleci/config.yml
git commit -m "ci: add CircleCI config"
git push

# Capture the pipeline run ID from JSON output
circleci pipeline run \
  --project <project-slug> \
  --definition-id <definition-id> \
  --branch <current-branch> \
  --json

Extract the id field from the JSON response as <run-id>.

6c — Watch

Watch using the pipeline run UUID (not --sha, which only works for push-triggered runs, not manually triggered ones):

circleci run watch <run-id> --project <project-slug> --failfast

• Exit 0 → pipeline passed, go to Wrap-up
• Exit 1 → failed, go to 6d
• Exit 6 → cancelled (ask user what happened)
• Exit 8 → timed out (check if jobs are stuck)

6d — Diagnose and fix (loop)

circleci logs --last-failed --project <project-slug>

Read the failure, identify the root cause, edit .circleci/config.yml, explain the change briefly, then loop back to 6b. Common fixes:

Symptom	Fix
Missing script: "test"	Replace npm test with npm run build
Command not found	Add install step or use a different Docker image
Test failures	Verify test command matches repo's actual test runner
Permission denied	chmod +x the script, or switch to a non-root image
Config schema error	Fix YAML per circleci config validate output
Missing env var	Add to project env vars via circleci envvar

Repeat 6b–6d until exit 0.

---

Wrap-up

circleci run open <run-number>   # open the passing run in the browser

Tell the user:

• The trigger from Stage 5 means future pushes fire automatically — no manual pipeline run needed.
• Suggested next steps (offer as a question):

AskUserQuestion(
  "What would you like to set up next?",
  header: "Next steps",
  multiSelect: true,
  options: [
    { label: "Secrets / env vars",  description: "Store API keys safely with circleci envvar or contexts" },
    { label: "Test parallelism",    description: "Split tests across multiple containers to go faster" },
    { label: "Dependency caching",  description: "Cache node_modules / pip / gradle to speed up builds" },
    { label: "Orbs",                description: "Reusable config packages for common tools (AWS, Docker, etc.)" }
  ]
)

Then help with whatever they select.

---

General guidance

• Run CLI checks before asking. If you can determine the answer yourself (auth status, project list, file existence), do it — don't ask the user.
• Keep state. Track org slug, project slug, project UUID, pipeline definition ID, and GitHub repo ID once discovered.
• Use --json on all commands that return IDs so values are easy to extract.
• On failure, surface the raw error, diagnose it, and propose a fix before retrying. Auth errors → circleci auth login. 404s → check project slug.