argocd

name	argocd
description	ArgoCD operations on the K3s cluster — branch repointing via ansible, OCI Helm chart wiring foot-guns (oci:// prefix breaks chart-name resolution), and the InvalidSpecError cache bounce.

ArgoCD

The cluster runs an app-of-apps. The root Application is all-cluster-services in namespace argo-cd; it templates the child Applications under kubernetes-services/templates/ from this repo.

Branch repointing (smoke-testing a PR branch)

Don't kubectl edit the root Application. The sanctioned path:

1. Edit group_vars/all.yml → set repo_branch: <branch>. Do NOT commit this — it's a local-only smoke pointer.
2. uv run ansible-playbook pb_all.yml --tags cluster — re-templates the root app and applies it. This is one of the few commands in the hard rules that's allowed to mutate the live cluster.
3. If child apps don't pick up the new revision within a minute, force a re-fetch on the root:

   kubectl -n argo-cd annotate application all-cluster-services \
     argocd.argoproj.io/refresh=hard --overwrite
   

4. Reset repo_branch: main when done.

Don't push an unpublished chart pin while ArgoCD watches that branch

While repo_branch points at a PR/dev branch for a smoke test, ArgoCD syncs from the pushed tip of that branch. So bumping an OCI chart pin (e.g. chart_version/image_tag in kubernetes-services/values.yaml) to a tag that isn't on the registry yet and pushing it makes ArgoCD fail the next sync with the ComparisonError: ... 403/404 from the OCI trap below — the chart genuinely doesn't exist at that version.

When prepping a version bump ahead of the upstream release: keep the edit out of the pushed branch — park it (a .parked.md diff under _plans/, or just leave values.yaml untouched and stage the bump later). Verify the tag is live before applying:

helm pull oci://ghcr.io/<org>/charts/<chart> --version <ver>   # 200 = safe to pin

Doc edits that merely mention the new version are fine to commit early (they don't deploy); only the values.yaml pin is load-bearing.

OCI Helm charts — oci:// prefix is a trap

For an OCI-hosted Helm chart (e.g. ghcr.io/<org>/charts/<chart>):

• Application repoURL: bare ghcr.io/<org>/charts (no oci:// prefix)
• Application chart: <chart> (the sub-path)
• AppProject sourceRepos: must match exactly — also bare ghcr.io/<org>/charts

If you use oci://ghcr.io/<org>/charts in repoURL, ArgoCD's URL construction drops the chart name and tries to pull https://ghcr.io/v2/<org>/charts/manifests/<ver> instead of .../charts/<chart>/manifests/<ver> — producing a baffling 403 from ghcr (denied access to the wrong path). The error log line to look for in argocd-repo-server:

HEAD "https://ghcr.io/v2/<org>/charts/manifests/<ver>": 
  GET "https://ghcr.io/token?scope=repository:<org>/charts:pull&...": 403: denied

If you see that, the fix is to drop oci:// from both the Application and the matching sourceRepos entry in argo-cd/argo-project.yaml.

InvalidSpecError sticks after AppProject edits

ArgoCD caches the InvalidSpecError condition with the original lastTransitionTime — even after you fix the AppProject's sourceRepos, the child app stays Unknown/Unknown with the same stale error. Annotations / refreshes don't clear it.

Bounce the application controller to force re-validation:

kubectl -n argo-cd delete pod argocd-application-controller-0

It's a StatefulSet, recreates cleanly within seconds. Allowed under the hard rules — pod lifecycle, not config drift.

ConfigMap-only changes don't roll the pod (envFrom + no checksum)

If a workload consumes a chart-rendered ConfigMap/Secret via envFrom (or env valueFrom), changing only the ConfigMap data does not restart the pod. Env vars are injected at pod start, and unless the chart's Deployment pod template carries a checksum/config (and checksum/secret) annotation, the Deployment spec is unchanged — so ArgoCD shows the app Synced/Healthy while the running pod keeps the stale values. Easy to miss: the ConfigMap in the cluster is correct, but the config is not actually enforced.

Diagnose by comparing the ConfigMap to what the pod actually has:

kubectl get cm -n <ns> <cm> -o jsonpath='{.data.<KEY>}'      # new value
kubectl exec -n <ns> <pod> -- printenv <KEY>                  # stale value

Enforce it by restarting the pod (the Deployment recreates it identically — pods aren't ArgoCD-tracked, so this is no git drift and allowed under the hard rules, same as the app-controller bounce above):

kubectl delete pod -n <ns> <pod>

The real fix is upstream: the chart should add checksum/config: {{ include (print $.Template.BasePath "/configmap.yaml") . | sha256sum }} to the pod template so data changes roll the workload automatically.

Spotting which validator is failing

Three distinct conditions, three distinct fixes:

Condition	Where it fires	What to fix
InvalidSpecError: application repo X is not permitted in project Y	App-controller, against AppProject	Add X to sourceRepos in argo-cd/argo-project.yaml, re-apply with --tags cluster, bounce app-controller
ComparisonError: failed to resolve revision ...: 403/404	Repo-server, against the remote registry	OCI URL wrong (see oci:// trap above) or chart genuinely missing/private
ComparisonError: values don't meet the specifications of the schema(s)	Repo-server, helm template	Chart's values.schema.json rejects your valuesObject — check additionalProperties: false, key casing, etc.

The first two often appear together when the project allowlist and URL form are both wrong; fixing only one leaves the app still Unknown.