菜单
Manage the hubs.json config that records how to reach each Hubitat hub by IP for code operations. Actions — init a config, add a hub, set the default hub, remove a hub, list hubs. Use when the user wants to configure, register, add, or list Hubitat hubs for deploy/pull/debug.
用 Codex 或 Claude 帮你安装 复制这段 Prompt，粘贴到 Codex、Claude 或其他助手里，让它检查 Skill 页面并帮你完成安装。
基于 SOC 职业分类
Move every app reference from an old Hubitat device onto a new one — via Settings → Swap Device where possible, a virtual-device bridge or parking slot where the swap list blocks it, and a guided manual re-select where neither works. Use when the user wants to swap, migrate, replace, or move a device's references to a different device, re-home a device to a different hub over Hub Mesh, or asks why a device does not appear in the Swap Device list.
Diagnose Hubitat Z-Wave and Zigbee network problems — ghost/failed nodes, packet errors, weak routes, dead or unjoined Zigbee devices, devices that stopped responding to commands, a broken hub-mesh link, an unhealthy mesh. Use when the user wants to check mesh health, find ghost nodes, debug a flaky/slow/dead Z-Wave or Zigbee device, or figure out why the radio network misbehaves.
Safely remove a Hubitat device — enumerate where it's used, warn about the blast radius before deleting, verify references cleared after, and re-wire them onto a replacement device. Use when the user wants to remove, delete, retire, or replace a device, or asks what a device is used by before deleting it.
Update Z-Wave device firmware on a Hubitat hub via the native zwaveJS updater — discover installed versions, find vendor-latest firmware, stage it, and batch-flash safely with a radio-hang watchdog. Use when the user wants to update/flash device firmware, check which devices are behind on firmware, or fix a device whose issue a firmware update addresses.
Tail a Hubitat hub's live log or event websocket, filtered, and interpret it against the code to diagnose an app or driver. Use when the user wants to debug, watch logs, tail the log stream, see live events, or figure out why a Hubitat app/driver misbehaves.
Deploy a Hubitat app or driver's Groovy source to a hub and confirm it saved and runs by watching the log stream. Use when the user wants to deploy, push, upload, or install app/driver code onto a Hubitat hub, or iterate the edit-deploy-check loop.
| name | hub-config |
| description | Manage the hubs.json config that records how to reach each Hubitat hub by IP for code operations. Actions — init a config, add a hub, set the default hub, remove a hub, list hubs. Use when the user wants to configure, register, add, or list Hubitat hubs for deploy/pull/debug. |
| argument-hint | [init|add|set-default|remove|list] [hub-name] |
This skill is an action router — pick the step that matches the user's intent and execute only that step. Do not run other steps; do not parallelize.
hubs.json is the stateful artifact that tells the deploy/pull/debug flows how to reach each hub. Code operations are per-hub by IP (multi-hub-topology rule). The file holds IPs only, never secrets — Maker API credentials come from the environment. skills/_scripts/hubs_config.py is the sole writer of its shape and owns schema migration; the schema lives in skills/hub-config/state-schema.md. All actions below call it; its argument and output contract is in its module docstring.
Create a fresh, empty config (refuses to overwrite an existing one without --force):
python3 .tessl/plugins/jbaruch/hubitat-dev/skills/_scripts/hubs_config.py init [--path hubs.json]
Then chain to Add to register the first hub.
python3 .tessl/plugins/jbaruch/hubitat-dev/skills/_scripts/hubs_config.py add --name <name> --ip <addr> [--port 8080] [--default]
The first hub added becomes the default automatically. Creates the file if it does not exist. Finish here.
python3 .tessl/plugins/jbaruch/hubitat-dev/skills/_scripts/hubs_config.py set-default --name <name>
Finish here.
python3 .tessl/plugins/jbaruch/hubitat-dev/skills/_scripts/hubs_config.py remove --name <name>
If the removed hub was the default, another becomes default automatically. Finish here.
python3 .tessl/plugins/jbaruch/hubitat-dev/skills/_scripts/hubs_config.py list
Print the configured hubs and which is default. Finish here.