vv-watch-pr

name	vv-watch-pr
description	Use when monitoring PR/CI status after pushing, diagnosing CI failures, investigating flakes, or cleaning up merged branches. Triggers on watch-pr, CI checks, CI debug, PR status, merged-branch cleanup.

vv-watch-pr

When to use

• You just pushed a branch or PR and want to know what CI is doing without tabbing to GitHub.
• CI failed and you need the actual errors, not a "checks failed" summary.
• A check fails then passes without a code push and you want to distinguish a flake from a real regression.
• A PR merged and you want to tidy up local and remote branches.

Anything about running validation locally (cache, retries, state queries) belongs in vibe-validate:vv-validate-dev-loop. Cache-key divergence between local and CI is covered in vibe-validate:caching-and-locking.

vv watch-pr — monitor PR checks

Auto-detect the current branch's PR

vv watch-pr

Resolves the PR attached to the current branch via gh and begins polling. If multiple PRs match or none match, vv prints guidance instead of guessing.

Specific PR

vv watch-pr 123

Works from any branch, including main. Useful when reviewing someone else's PR or when your local branch has moved on.

What it does

• Polls GitHub checks at a reasonable cadence (no API hammering) and streams status transitions to your terminal.
• When a check has a vibe-validate state attached (via git notes on the CI-side tree hash), watch-pr fetches that state and prints the extracted YAML — you see the exact failing step, file, line, and message instead of raw log output.
• Surfaces check reruns without a new push as possible flakes.
• Exits non-zero if any required check fails, so it composes with shell pipelines and agent loops.

Prerequisites

watch-pr uses the GitHub CLI (gh) under the hood. Before first use:

• gh auth status should report an authenticated account with scope for the repo in question.
• The remote named origin (or the configured remote) should point at the GitHub repository whose PRs you want to watch.
• The repository needs a PR open against the current branch for the auto-detect form to work; otherwise pass the number explicitly.

If gh is missing or unauthenticated, watch-pr stops early with a clear error rather than silently returning no data.

--fail-fast

vv watch-pr --fail-fast

Exits as soon as the first failed check is extracted, rather than waiting for all checks to complete. Intended for agent loops where the first signal is enough to begin diagnosing. Without the flag, watch-pr waits for every check so you get the complete failure surface.

Recent fix worth knowing: --fail-fast previously waited for every extraction before exiting. It now correctly exits on the first extraction, which matches the documented behavior.

Diagnosing CI failures

Step 1 — pull the vibe-validate state from CI

If the CI workflow runs vibe-validate validate (either directly or via a project-specific wrapper), CI writes the resulting state to git notes against the tree hash that CI ran on. vv watch-pr fetches those notes and prints the extracted YAML locally. That YAML is the same shape vv state would produce — extracted errors only, ANSI stripped, file:line format.

This is the single highest-leverage move for CI debugging: never read raw CI logs when a vibe-validate state is available.

Step 2 — compare CI's extraction against your local state

If local passes but CI fails, the suspects are:

• Cache-key divergence: CI and local computed different git tree hashes (uncommitted files, lockfile drift, line endings). See vibe-validate:caching-and-locking.
• Environment mismatch: Node version, OS, shell, locale, timezone, or env vars differ between CI and your machine.
• Missing git history: CI didn't fetch enough history for git diff origin/main or similar checks — usually fixed by fetch-depth: 0 in the checkout step.
• Missing secrets/env: CI workflow didn't wire a required secret (DATABASE_URL, GitHub token for private packages, etc.).
• Genuine flake: A test has a race, resource contention, or network dependency that only fails under CI timing.

Step 3 — reproduce locally

Once you know which step failed, reproduce it with vv run wrapping the exact CI invocation:

vv run <command CI ran>

vv run extracts errors the same way CI does, so the output should match. If it doesn't match, the divergence is environmental — jump back to Step 2.

Two subtleties when reproducing:

• Set CI=true in the local shell if the command branches on it (many test runners enable verbose reporters only in CI). Without this the local run can emit a different format than CI, and the extractor's output will appear to diverge when it actually matches.
• Match Node and package-manager versions. A .nvmrc / .tool-versions / volta pin in the repo is the source of truth; if you're on a different Node major, behavior can legitimately differ.

--debug for deeper inspection

When the extracted errors aren't enough, re-run validation with --debug:

vv validate --debug --yaml

--debug creates output files for every step (not just failures) and adds an outputFiles field to the result pointing at combined.jsonl (timestamped stdout+stderr) and, where applicable, stdout.log/stderr.log. Use it when you suspect the extractor is dropping context, or when investigating why the same command behaves differently in CI. Not appropriate for normal runs — it generates extra files and slows things down.

Flaky test detection

When watch-pr sees a check fail then pass (or vice versa) without a new push, it flags the check as possibly flaky. Two responses:

1. Genuine flake in test code — race condition, timing assumption, resource contention, order-dependent state. Fix the test.
2. Extraction miss — the check flipped because a transient infrastructure error was classified as a test failure. If this recurs, the extractor for that tool may need tightening. See vibe-validate:authoring-extractors.

On main, if a flaky run lands and subsequent runs pass, vv validate --retry-failed re-runs only the failed steps while preserving cached passes, and warns when a step passes on retry without code changes (that warning is the flake signal).

A pragmatic triage when watch-pr flags a flake:

1. Re-run the CI job (or push an empty commit) once, to confirm the failure isn't reproducible.
2. If the second run passes, capture the failing run's extracted state and open a tracking issue. Do not just move on — flakes compound.
3. If the second run also fails, it isn't a flake — it's a real regression masquerading as one. Reproduce locally per the three-step flow above.

vv cleanup — post-PR branch cleanup

vv cleanup

After a PR merges, vv cleanup identifies local branches whose upstream PR has been merged or closed (queried via gh) and offers to delete them. It also prunes local references to remote branches that no longer exist on the origin.

Behavior worth knowing:

• Confirmation prompt: vv cleanup never deletes without asking — it prints the proposed list and waits. Agents running non-interactively should pass the explicit confirm flag if the command supports it, or filter the list themselves.
• Current branch is never deleted: if you're sitting on a merged branch, vv cleanup will tell you to switch first.
• Unpushed commits protect a branch: branches with local commits not present on the remote are skipped, regardless of PR state, so you don't lose in-flight work.
• PR state is the signal, not merge commit presence: vv cleanup trusts GitHub's PR state. Squash-and-merge workflows don't leave a merge commit on main, so heuristic-based cleanup tools often get this wrong. vv cleanup does not.

Run it whenever the branch list gets long, or as part of a post-merge ritual.

When vv cleanup is the wrong tool

• Shared branches: vv cleanup is for your local clone's branch list, not for deleting shared integration branches on the remote. It will not delete the remote tracking ref without confirmation, and it will not delete a branch another collaborator is still working on (as inferred from PR state).
• PRs with the "do not delete branch" convention: some teams keep long-lived branches (release trains, hotfix lines) even after a PR merges. Add those to your local skip list rather than running cleanup and re-creating them.
• Forks: if you routinely push from feature branches in a fork, the PR state on the upstream repo may be misleading. Point vv cleanup at the fork's PR state, not upstream's.

Common CI failure patterns

"Works locally, fails in CI" — start by fetching the CI-side vibe-validate state with vv watch-pr. If the extracted errors are genuinely a test failure, reproduce with vv run using the exact CI invocation. If reproduction succeeds locally, it's test code. If it doesn't, it's environment — check Node version, fetch-depth, line endings, and env vars.

"Checks pending forever" — usually GH API rate limiting or the workflow never started (bad trigger filter, required status check not configured). vv watch-pr will surface the pending state; confirm the workflow actually queued via gh run list on the branch.

"Flake on main" — run vv validate --retry-failed to re-run only the failing step. If it passes on retry without code changes, vv warns you it looks flaky. Fix the underlying race before it bites again.

"CI passes but no state was recorded" — the validate step crashed before writing state (OOM, timeout, segfault, config syntax error). Check the raw CI logs for the exit signal, not the extraction. Consider adding --debug to the CI invocation to capture full output as an artifact.

"Extracted errors are empty despite a failure" — the extractor didn't recognize the tool's output format. See vibe-validate:authoring-extractors for how to build a custom extractor and validate it against the CI output.

"Inner vv run swallowed the failure output" — if your package.json test scripts wrap commands in vibe-validate run "vitest ..." and you run them from vibe-validate validate, the inner vv run automatically switches to pass-through mode: it inherits stdio, propagates the exit code, and skips its own capture/extract/cache so the outer captures the real underlying tool's output. Extraction then runs on actual data instead of an inner YAML summary, and vv watch-pr can recover the real failure from the CI log. This is signaled via the VV_PARENT_CONTEXT env var, set automatically by the parent. A depth cap of 3 fails loudly on recursive misconfiguration. vv doctor reports Running inside parent vibe-validate (runId=…, depth=N, step="…") when invoked under a parent.

See also

• vibe-validate:vv-validate-dev-loop — the local validation loop, state queries, and vv run.
• vibe-validate:caching-and-locking — why local and CI sometimes compute different tree hashes, and how to bring them back into agreement.
• vibe-validate:authoring-extractors — when CI output isn't yielding extracted errors, fix the extractor.
• vibe-validate:setting-up-projects — vv generate-workflow for bootstrapping GitHub Actions CI that integrates cleanly with watch-pr.