菜单
Run the common ESP32 workflow in PlatformIO: build, flash, monitor, diagnose, patch, and retry. Use for ESP32/ESP8266/ESP32-S3/ESP32-C3 projects using Arduino or ESP-IDF.
用 Codex 或 Claude 帮你安装 复制这段 Prompt，粘贴到 Codex、Claude 或其他助手里，让它检查 Skill 页面并帮你完成安装。
基于 SOC 职业分类
Bring up a new embedded board or create a minimal working firmware project with PlatformIO. Use when setting up a new project, identifying a connected board, creating a blink or serial smoke test, verifying build/flash/boot, or confirming the board is alive.
Validate firmware behavior on real hardware rather than compilation-only checks. Use when running physical acceptance tests, confirming boot markers, validating sensor output, or checking runtime timing/telemetry.
Diagnose and fix PlatformIO build, upload, and configuration failures. Use when resolving compiler errors, missing libraries, platformio.ini issues, memory overflows, port conflicts, permission errors, or failed uploads.
Deploy and validate services on single-board computers such as Raspberry Pi, Jetson, Orange Pi, BeagleBone, and Coral. Use when checking SSH connectivity, runtime dependencies, logs, service health, Docker workloads, or systemd deployment.
Diagnose embedded runtime behavior through serial logs after build/upload. Use when investigating boot loops, crashes, watchdog resets, panic output, missing boot markers, peripheral initialization issues, or silent serial sessions.
Use when developing firmware for microcontrollers, implementing RTOS applications, or optimizing power consumption. Invoke for STM32, ESP32, FreeRTOS, bare-metal, power optimization, real-time systems.
| name | esp32-flash-monitor |
| description | Run the common ESP32 workflow in PlatformIO: build, flash, monitor, diagnose, patch, and retry. Use for ESP32/ESP8266/ESP32-S3/ESP32-C3 projects using Arduino or ESP-IDF. |
Use this skill for the common ESP32 workflow: build, flash, monitor, diagnose, patch, and retry.
esp32dev
esp32-s3-devkitc-1
esp32-c3-devkitm-1
nodemcu-32s
lolin_s2_mini