workflow-task-setup

name	workflow-task-setup
description	Convert any user-provided implementation plan or scope document into TaurOboros kanban tasks with correct dependencies, states, and persistence.
compatibility	opencode
metadata	{"audience":"agents","workflow":"tauroboros"}

What I do

• Turn any user-provided planning material into TaurOboros tasks.
• Map steps and milestones into executable backlog tasks or reusable templates.
• Set dependencies, ordering, and task options so the workflow can run them correctly.
• Configure standard vs best_of_n execution strategy per task when needed.
• Explain and use the workflow's API, database layout, and state model accurately.

When to use me

• The user wants tasks created from a plan, spec, issue, notes, checklist, design doc, or any other document that describes scope, ideas, or implementation steps.
• The user wants an existing document translated into kanban tasks.
• The user wants tasks normalized, split, merged, reordered, or reconfigured before execution.

Core Behavior

• Prefer creating tasks, not starting execution, unless the user explicitly asks to run them.
• Prefer small, outcome-based tasks that can be completed and reviewed independently.
• Keep each task prompt self-contained enough that an execution agent can act on it without needing to rediscover the original plan.
• Use dependencies for real sequencing constraints, not just because steps are numbered.
• Create template tasks only when the user wants reusable blueprints; otherwise create backlog tasks.
• Reuse or update an existing task instead of creating a duplicate when the match is clear. If the match is ambiguous, ask.
• Use best_of_n only for tasks where multiple candidate implementations and convergence are useful; otherwise keep standard.

Recommended Workflow

1. Read the source material and extract the real deliverables, constraints, and acceptance criteria.
2. Check existing tasks before creating new ones.
3. Split the work into the smallest useful execution units.
4. Decide whether each item should be a template or backlog task.
5. Add dependencies only where one task truly blocks another.
6. Create tasks in intended execution order, or reorder them afterward.
7. Verify the stored result by listing tasks again and summarizing the mapping back to the user.

Task Shape

The workflow task model is defined in src/types.ts.

Required fields for useful task creation:

Field	Meaning
name	Short card title shown on the board
prompt	Main execution instructions

Common optional fields:

Field	Meaning	Normal default
status	Board state	backlog for runnable tasks, template for reusable blueprints
branch	Target git branch	Global workflow default branch
planModel	Planning model override	default
executionModel	Execution model override	default
planmode	Pause after planning and wait for approval	false
autoApprovePlan	Automatically approve plan without waiting	false
review	Run review loop after implementation	true
autoCommit	Auto-commit on success	true
deleteWorktree	Remove worktree when task completes, resets, or is marked done. If false, worktree is preserved even on failure.	true
requirements	Array of blocking task ids	[]
thinkingLevel	Default reasoning level: default, low, medium, high	default
planThinkingLevel	Reasoning level for planning phase only	default (inherits from thinkingLevel)
executionThinkingLevel	Reasoning level for execution phase only	default (inherits from thinkingLevel)
executionStrategy	Execution mode: standard or best_of_n	standard
bestOfNConfig	Best-of-N worker/reviewer/final-applier config	null unless strategy is best_of_n
skipPermissionAsking	Skip asking for permissions during execution	true
maxReviewRunsOverride	Override global max reviews for this task	null
smartRepairHints	Hints for smart repair when task is stuck	null

Advanced fields normally left alone on fresh task creation:

Field	Meaning
executionPhase	Internal phase for plan-mode lifecycle
bestOfNSubstage	Internal substage for best-of-n lifecycle
awaitingPlanApproval	Whether a plan-mode task is waiting for approval
planRevisionCount	Number of plan revision cycles
reviewActivity	Current review activity state: idle or running
agentOutput	Accumulated agent output
reviewCount	Review loop counter
sessionId / sessionUrl	Linked workflow session
worktreeDir	Active worktree location
errorMessage	Failure detail
completedAt	Unix timestamp when done
isArchived	Whether task is archived
archivedAt	Unix timestamp when archived

State Model

Task status values:

Status	Meaning
template	Reusable blueprint, not meant to execute directly
backlog	Ready for execution when dependencies are satisfied
executing	Currently running
review	Waiting for review or user attention
done	Finished successfully
failed	Execution failed
stuck	Review found unresolved gaps or the workflow could not continue

Execution phase values:

Phase	Meaning
not_started	Normal initial state
plan_complete_waiting_approval	Planning finished and the task is paused
plan_revision_pending	Plan revision has been requested
implementation_pending	Plan was approved and implementation can run
implementation_done	Implementation finished

Best-of-N substage values:

Substage	Meaning
idle	No active best-of-n internals running
workers_running	Worker candidates are running
reviewers_running	Reviewers are evaluating candidates
final_apply_running	Final applier is running and preparing merge result
blocked_for_manual_review	Automation paused for human decision
completed	Best-of-n flow finished successfully

Important runtime rules from the server and orchestrator:

• A task is executable when status = backlog and executionPhase != plan_complete_waiting_approval.
• A plan-mode task also becomes executable when executionPhase = implementation_pending.
• When a plan-mode task finishes planning, it moves to status = review, awaitingPlanApproval = true, executionPhase = plan_complete_waiting_approval.
• Approving that plan moves it to status = backlog, awaitingPlanApproval = false, executionPhase = implementation_pending.
• Requesting a plan revision moves it to executionPhase = plan_revision_pending.
• Resetting a task to backlog clears it back to executionPhase = not_started and awaitingPlanApproval = false.
• Best-of-N and plan mode cannot be combined in v1 (planmode = true with executionStrategy = best_of_n is rejected by API validation).
• For best_of_n, the board still treats it as one logical task card while child runs are stored separately.
• failed and stuck appear in the review column in the UI, but they are distinct stored statuses.
• Worktree preservation on failure: When a task fails, the worktree is NOT automatically deleted. The worktree (and its partial/complete work) is preserved so users can inspect, debug, or recover their work. Worktrees are only deleted when:
  • Task completes successfully (if deleteWorktree is true, the default)
  • User explicitly resets a task to backlog (cleanup happens regardless of deleteWorktree)
  • User explicitly marks a task as done (cleanup happens if deleteWorktree is true)

Dependency Rules

• Dependencies are stored as task ids in requirements.
• The DB stores requirements as a JSON string, but the API uses a JSON array of strings.
• Only add a dependency when task B should not begin until task A is completed.
• Avoid artificial chains when tasks can be reviewed and executed independently.
• Circular dependencies will break scheduling.
• Tasks that are already outside the current executable set do not block batching the same way as active backlog items, so dependencies are most meaningful between active tasks you are setting up.

Architecture Overview

TaurOboros uses a standalone server with SQLite database architecture:

1. Standalone Server (src/server/server.ts) - Runs as a Bun server

   • Provides HTTP API and WebSocket server
   • Manages SQLite database with ACID guarantees
   • Runs the task orchestrator with pause/resume support
   • Handles workflow runs, sessions, and execution
   • Supports both native and container isolation modes

2. Kanban UI (src/kanban-vue/) - Vue 3 + Tailwind CSS + Vite

   • Build output: src/kanban-vue/dist/
   • WebSocket live updates
   • 5 kanban columns: template, backlog, executing, review, done
   • 8 modals: Task, Options, Execution Graph, Approve, Revision, Start Single, Session Viewer, Best-of-N Details
   • Planning Chat modal for interactive task planning
   • Container Configuration modal for image management

3. Configuration (.tauroboros/settings.json for infrastructure config)

   • Database location: <workspace>/.tauroboros/tasks.db
   • Container settings for isolation mode
   • Skills auto-discovery from .pi/skills/

Planning Chat

Interactive planning sessions allow real-time collaboration with AI:

# Create a planning session
curl -X POST http://localhost:<port>/api/planning/sessions \
  -H "Content-Type: application/json" \
  -d '{
    "systemPrompt": "You are a helpful planning assistant...",
    "model": "claude-sonnet-4",
    "thinkingLevel": "medium"
  }'

# Send a message with context attachments
curl -X POST http://localhost:<port>/api/planning/sessions/<id>/message \
  -H "Content-Type: application/json" \
  -d '{
    "content": "Help me plan this feature...",
    "contextAttachments": [
      {"type": "file", "name": "README.md", "content": "..."},
      {"type": "task", "name": "Related Task", "taskId": "abc123"}
    ]
  }'

# Change model mid-conversation
curl -X POST http://localhost:<port>/api/planning/sessions/<id>/set-model \
  -H "Content-Type: application/json" \
  -d '{"model": "claude-opus-4"}'

Planning sessions support:

• Streaming responses: Real-time thinking and text deltas
• Context attachments: Files, screenshots, and other tasks
• Model switching: Change AI model without losing context
• Session persistence: Reconnect to planning sessions after server restart

Persistence Layout

The workflow DB is managed by the standalone server at:

<workspace>/.tauroboros/tasks.db

The storage layer lives in src/db.ts.

Tables

tasks

Column	Notes
id	Text primary key
name	Task name
idx	Board ordering
prompt	Task instructions
branch	Git branch
plan_model	Planning model
execution_model	Execution model
planmode	0/1 boolean
auto_approve_plan	0/1 boolean - auto approve plans
review	0/1 boolean
auto_commit	0/1 boolean
delete_worktree	0/1 boolean
status	Task status string
requirements	JSON array string of task ids
agent_output	Aggregated output
review_count	Number of review attempts
session_id	Workflow session id
session_url	Session URL
worktree_dir	Worktree path
error_message	Failure details
created_at	Unix timestamp
updated_at	Unix timestamp
completed_at	Unix timestamp or null
thinking_level	default, low, medium, high
execution_phase	Internal plan-mode phase
awaiting_plan_approval	0/1 boolean
plan_revision_count	Number of plan revisions
execution_strategy	standard or best_of_n
best_of_n_config	JSON config for worker/reviewer/final-applier runs
best_of_n_substage	Internal best-of-n substage
skip_permission_asking	0/1 boolean
max_review_runs_override	Override max reviews
smart_repair_hints	Hints for repair
review_activity	idle or running
is_archived	0/1 boolean
archived_at	Unix timestamp or null

Indexes:

• idx_tasks_status on status
• idx_tasks_idx on idx
• idx_tasks_status_idx on status, idx
• idx_tasks_execution_strategy on execution_strategy

options

Key-value store used for workflow defaults.

Important keys:

Key	Meaning
commit_prompt	Commit instructions
branch	Default branch
plan_model	Default plan model
execution_model	Default execution model
review_model	Default review model
repair_model	Default repair model
extra_prompt	Extra prompt appended to all tasks
command	Pre-execution command
parallel_tasks	Parallelism limit
port	Kanban server port
thinking_level	Default thinking level
plan_thinking_level	Thinking level for planning phase
execution_thinking_level	Thinking level for execution phase
review_thinking_level	Thinking level for review phase
repair_thinking_level	Thinking level for repair phase
max_reviews	Maximum review cycles
max_json_parse_retries	Max JSON parse retry attempts (default: 5)
auto_delete_normal_sessions	Auto-delete normal sessions
auto_delete_review_sessions	Auto-delete review sessions
show_execution_graph	Show execution graph in UI
telegram_bot_token	Telegram bot token
telegram_chat_id	Telegram chat ID
telegram_notifications_enabled	Enable Telegram notifications
column_sorts	JSON column sort preferences
container_enabled	Enable container isolation mode
container_image	Container image name
container_auto_prepare	Auto-build/pull image on startup

task_runs

Child run records for best-of-n internals.

Column	Notes
id	Text primary key
task_id	Parent logical task id
phase	worker, reviewer, final_applier
slot_index / attempt_index	Expanded slot position and attempt
model	Model used for the run
task_suffix	Optional slot-specific prompt suffix
status	pending, running, done, failed, skipped
session_id / session_url	Session metadata
worktree_dir	Worktree path
summary	Short run summary
error_message	Run-level error details
candidate_id	Linked candidate id (worker runs)
metadata_json	Structured metadata (reviewer output, verification, etc.)
created_at	Unix timestamp
updated_at	Unix timestamp
completed_at	Unix timestamp or null

task_candidates

Successful worker candidate artifacts for best-of-n.

Column	Notes
id	Text primary key
task_id	Parent logical task id
worker_run_id	Source worker run
status	available, selected, rejected
changed_files_json	JSON array of changed file paths
diff_stats_json	JSON diff stats map
verification_json	JSON verification result
summary	Candidate summary
error_message	Candidate artifact error detail
created_at	Unix timestamp
updated_at	Unix timestamp

workflow_runs

Workflow run records for batch execution.

Column	Notes
id	Text primary key
kind	all_tasks, single_task, workflow_review
status	running, paused, stopping, completed, failed
display_name	Human-readable run name
target_task_id	Target task for single-task runs
task_order_json	JSON array of task IDs in execution order
current_task_id	Currently executing task
current_task_index	Index in task order
pause_requested	0/1 boolean
stop_requested	0/1 boolean
error_message	Failure details
created_at	Unix timestamp
started_at	Unix timestamp
updated_at	Unix timestamp
finished_at	Unix timestamp or null
is_archived	0/1 boolean
archived_at	Unix timestamp or null
color	Hex color for UI

workflow_sessions

Workflow session records linking to PI sessions.

Column	Notes
id	Text primary key
task_id	Associated task
task_run_id	Associated task run (for best-of-n)
session_kind	task, task_run_worker, task_run_reviewer, task_run_final_applier, review_scratch, repair, plan, plan_revision
status	starting, active, paused, completed, failed, aborted
cwd	Working directory
worktree_dir	Worktree path
branch	Git branch
pi_session_id	PI session ID
pi_session_file	PI session file path
process_pid	Process PID
model	Model used
thinking_level	Thinking level
started_at	Unix timestamp
updated_at	Unix timestamp
finished_at	Unix timestamp or null
exit_code	Exit code or null
exit_signal	Exit signal or null
error_message	Error message or null

session_messages

Normalized session message log with pi-native event schema.

Column	Notes
id	Integer primary key
seq	Sequence number within session
message_id	Message UUID
session_id	Workflow session ID
timestamp	Unix timestamp
role	user, assistant, system, tool
event_name	Event name
message_type	Message type
content_json	JSON content
model_provider	Model provider
model_id	Model ID
agent_name	Agent name
prompt_tokens	Token count
completion_tokens	Token count
cache_read_tokens	Token count
cache_write_tokens	Token count
total_tokens	Token count
cost_json	Cost breakdown JSON
cost_total	Total cost
tool_call_id	Tool call ID
tool_name	Tool name
tool_args_json	Tool arguments JSON
tool_result_json	Tool result JSON
tool_status	Tool status
edit_diff	Edit diff
edit_file_path	Edited file path
session_status	Session status
workflow_phase	Workflow phase
raw_event_json	Raw event JSON

session_io

Raw session I/O capture stream.

Column	Notes
id	Integer primary key
session_id	Workflow session ID
seq	Sequence number
stream	stdin, stdout, stderr, server
record_type	rpc_command, rpc_response, rpc_event, stderr_chunk, lifecycle, snapshot, prompt_rendered
payload_json	JSON payload
payload_text	Text payload
created_at	Unix timestamp

prompt_templates

Prompt template storage.

Column	Notes
id	Integer primary key
key	Template key (unique)
name	Human-readable name
description	Description
template_text	Template text
variables_json	JSON array of variable names
is_active	0/1 boolean
created_at	Unix timestamp
updated_at	Unix timestamp

prompt_template_versions

Version history for prompt templates.

Column	Notes
id	Integer primary key
prompt_template_id	Reference to template
version	Version number
template_text	Template text at this version
variables_json	Variables JSON
created_at	Unix timestamp

Preferred Write Path

Prefer the HTTP API when the kanban server is running, because API writes also broadcast UI updates.

New task creation appends to the end of the board using max(idx) + 1; use the reorder endpoint if the final order matters.

Base URL:

http://localhost:<port>

The port is read from the options table under the port key (default: 3789).

Useful Endpoints

Method	Path	Purpose
GET	/api/tasks	List tasks
POST	/api/tasks	Create task
GET	/api/tasks/:id	Get single task
PATCH	/api/tasks/:id	Update task
DELETE	/api/tasks/:id	Delete/archive task
PUT	/api/tasks/reorder	Reorder by idx
POST	/api/tasks/:id/reset	Reset task to backlog
POST	/api/tasks/:id/start	Start single task
POST	/api/tasks/:id/approve-plan	Approve a plan-mode task
POST	/api/tasks/:id/request-plan-revision	Request plan revision
POST	/api/tasks/:id/request-revision	Alias for request-plan-revision
GET	/api/tasks/:id/review-status	Get review status
POST	/api/tasks/:id/repair-state	Repair task state
GET	/api/tasks/:id/runs	List best-of-n child runs for task
GET	/api/tasks/:id/candidates	List best-of-n candidate artifacts
GET	/api/tasks/:id/best-of-n-summary	Aggregated best-of-n progress/status
POST	/api/tasks/:id/best-of-n/select-candidate	Manually select a candidate
POST	/api/tasks/:id/best-of-n/abort	Abort best-of-n execution
GET	/api/tasks/:id/messages	Get session messages for task
DELETE	/api/tasks/done/all	Archive/delete all done tasks
GET	/api/options	Read workflow defaults
PUT	/api/options	Update workflow defaults
GET	/api/branches	List git branches
GET	/api/models	List available PI models
GET	/api/runs	List workflow runs
DELETE	/api/runs/:id	Archive a workflow run
POST	/api/runs/:id/pause	Pause a workflow run
POST	/api/runs/:id/resume	Resume a workflow run
POST	/api/runs/:id/stop	Stop a workflow run
POST	/api/start	Start all tasks
POST	/api/execution/start	Start all tasks (alt)
POST	/api/stop	Stop execution
POST	/api/execution/stop	Stop execution (alt)
POST	/api/execution/pause	Pause execution
GET	/api/execution-graph	Get execution graph
GET	/api/sessions/:id	Get workflow session
GET	/api/sessions/:id/messages	Get session messages
GET	/api/sessions/:id/timeline	Get session timeline entries
GET	/api/sessions/:id/usage	Get session usage rollup
GET	/api/sessions/:id/io	Get session I/O records
GET	/api/task-runs/:id/messages	Get messages for task run
POST	/api/pi/sessions/:id/events	Ingest PI session events
POST	/api/tasks/create-and-wait	Create task and wait for completion
GET	/api/version	Get server version info
GET	/api/prompt-templates	List prompt templates
POST	/api/prompt-templates	Create/update prompt template
GET	/api/planning/sessions	List planning sessions
POST	/api/planning/sessions	Create planning session
GET	/api/task-groups	List all task groups
POST	/api/task-groups	Create a new task group
GET	/api/task-groups/:id	Get group with tasks
PATCH	/api/task-groups/:id	Update group (name, color, status)
DELETE	/api/task-groups/:id	Delete group
POST	/api/task-groups/:id/tasks	Add tasks to group
DELETE	/api/task-groups/:id/tasks	Remove tasks from group
POST	/api/task-groups/:id/start	Start group execution
GET	/api/tasks/:id/group	Get task's group membership
POST	/api/tasks/:id/move-to-group	Move task to/from a group
GET	/api/container/image-status	Get container image status
POST	/api/container/config	Update container config
GET	/healthz	Health check
GET	/ws	WebSocket endpoint

API payload field names use camelCase. DB column names use snake_case.

If you must write directly to SQLite (standalone server manages this database):

• requirements must be JSON-encoded text.
• boolean fields are stored as 0 or 1.
• best_of_n_config must be JSON-encoded text when strategy is best_of_n.
• direct DB writes do not broadcast websocket updates.
• creating via raw SQL means you are responsible for idx, timestamps, and field normalization.
• when the server receives a PATCH that sets status = backlog without an explicit executionPhase, it resets executionPhase to not_started and awaitingPlanApproval to false.

Note: The standalone server must be running for the HTTP API to work. If you see connection errors, the server may need to be started with bun start from the project root.

CI/CD Integration

Synchronous task creation for CI/CD pipelines:

# Create task and wait for completion
curl -X POST http://localhost:<port>/api/tasks/create-and-wait \
  -H "Content-Type: application/json" \
  -d '{
    "name": "Run tests",
    "prompt": "Run the test suite and report results...",
    "timeoutMs": 600000,
    "pollIntervalMs": 5000
  }'

The create-and-wait endpoint:

• Creates a task, starts execution, and polls until completion
• Returns full task and run details on completion
• Supports timeoutMs (max 2 hours) and pollIntervalMs (1-30 seconds)
• Returns HTTP 408 on timeout with current status
• Ideal for CI/CD pipelines that need to wait for task completion

Container Configuration

Container isolation provides process and filesystem isolation:

# Check container image status
curl http://localhost:<port>/api/container/image-status

# Update container configuration
curl -X POST http://localhost:<port>/api/container/config \
  -H "Content-Type: application/json" \
  -d '{
    "image": "pi-agent:alpine",
    "autoPrepare": true,
    "packages": ["nodejs", "python3"]
  }'

# Add packages to container
curl -X POST http://localhost:<port>/api/container/packages \
  -H "Content-Type: application/json" \
  -d '{"package": "typescript"}'

Container mode features:

• Same-path binding: Worktree paths are identical inside/outside container
• Image preparation: Build/pull images before first use (not during task execution)
• Resume support: Containers can be reattached on resume after pause
• Emergency stop: Kill all containers immediately if needed

Useful Queries

Inspect current tasks:

SELECT id, idx, name, status, execution_phase, awaiting_plan_approval, requirements
FROM tasks
WHERE is_archived = 0
ORDER BY idx ASC;

Inspect only runnable backlog tasks:

SELECT id, idx, name, branch, status, execution_phase
FROM tasks
WHERE status = 'backlog'
  AND execution_phase != 'plan_complete_waiting_approval'
  AND is_archived = 0
ORDER BY idx ASC;

Inspect templates:

SELECT id, idx, name
FROM tasks
WHERE status = 'template'
  AND is_archived = 0
ORDER BY idx ASC;

Inspect workflow defaults:

SELECT key, value
FROM options
ORDER BY key ASC;

Inspect tasks waiting for plan approval:

SELECT id, idx, name, status, execution_phase, awaiting_plan_approval
FROM tasks
WHERE awaiting_plan_approval = 1
  AND is_archived = 0
ORDER BY idx ASC;

Inspect archived tasks:

SELECT id, name, status, archived_at
FROM tasks
WHERE is_archived = 1
ORDER BY archived_at DESC;

Example direct insert shape:

INSERT INTO tasks (
  id, name, idx, prompt, branch, plan_model, execution_model,
  planmode, auto_approve_plan, review, auto_commit, delete_worktree, status,
  requirements, created_at, updated_at, thinking_level,
  execution_phase, awaiting_plan_approval, skip_permission_asking,
  execution_strategy, is_archived, archived_at
) VALUES (
  'task1234',
  'Implement feature X',
  7,
  'Implement feature X according to the user-approved scope...',
  'main',
  'default',
  'default',
  0,
  0,
  1,
  1,
  1,
  'backlog',
  '[]',
  unixepoch(),
  unixepoch(),
  'default',
  'not_started',
  0,
  1,
  'standard',
  0,
  NULL
);

Example API Payloads

Create a normal backlog task:

{
  "name": "Build settings form",
  "prompt": "Implement the settings form described in the user-provided scope. Preserve the existing UI patterns and add only the fields required by the spec.",
  "status": "backlog",
  "branch": "main",
  "planModel": "default",
  "executionModel": "default",
  "planmode": false,
  "autoApprovePlan": false,
  "review": true,
  "autoCommit": true,
  "deleteWorktree": true,
  "skipPermissionAsking": true,
  "requirements": [],
  "thinkingLevel": "default",
  "planThinkingLevel": "medium",
  "executionThinkingLevel": "low"
}

Create a plan-mode task that should pause for approval after planning:

{
  "name": "Design migration strategy",
  "prompt": "Review the source material, produce a migration plan, and stop for approval before implementation.",
  "status": "backlog",
  "planmode": true,
  "autoApprovePlan": false,
  "review": true,
  "autoCommit": true,
  "deleteWorktree": true,
  "skipPermissionAsking": true,
  "requirements": [],
  "thinkingLevel": "medium"
}

Create a best-of-n task:

{
  "name": "Implement API pagination (best-of-n)",
  "prompt": "Add cursor-based pagination to the list endpoint and update tests.",
  "status": "backlog",
  "executionStrategy": "best_of_n",
  "bestOfNConfig": {
    "workers": [
      { "model": "claude-sonnet-4", "count": 2 },
      { "model": "claude-haiku-4", "count": 1, "taskSuffix": "Prefer minimal schema changes." }
    ],
    "reviewers": [
      { "model": "claude-sonnet-4", "count": 1 }
    ],
    "finalApplier": {
      "model": "claude-opus-4",
      "taskSuffix": "Preserve current API response compatibility."
    },
    "minSuccessfulWorkers": 1,
    "selectionMode": "pick_or_synthesize",
    "verificationCommand": "bun test"
  },
  "planmode": false,
  "review": true,
  "autoCommit": true,
  "deleteWorktree": true,
  "skipPermissionAsking": true,
  "requirements": [],
  "thinkingLevel": "medium"
}

Plan-to-Task Heuristics

• If the source describes milestones, map each milestone to one or more executable tasks.
• If the source mixes research, implementation, and validation, split those into separate tasks when they can be reviewed independently.
• If one step exists only to unblock another, make it a dependency.
• If a step is optional, risky, or calls for human approval, consider planmode = true.
• If the user wants reusable scaffolding for future work, create template tasks instead of backlog tasks.
• Keep prompts explicit about files, subsystems, constraints, and verification expectations when those are available in the source.

Prompt Template Customization

Customize prompts for different execution phases:

# List all templates
curl http://localhost:<port>/api/prompt-templates

# Get a specific template
curl http://localhost:<port>/api/prompt-templates/execution

# Create custom template
curl -X POST http://localhost:<port>/api/prompt-templates \
  -H "Content-Type: application/json" \
  -d '{
    "key": "my_custom_execution",
    "name": "My Custom Execution",
    "templateText": "You are an expert {{language}} developer...",
    "variables": ["task", "options", "worktreeDir", "language"]
  }'

# Set as active
curl -X POST http://localhost:<port>/api/prompt-templates/my_custom_execution/set-active \
  -H "Content-Type: application/json" \
  -d '{"version": 1}'

Built-in template keys:

• execution - Main task execution prompt
• planning - Plan mode planning phase
• plan_revision - Plan mode revision
• review - Review loop
• review_fix - Review fix iteration
• commit - Git commit instructions
• repair - Smart repair analysis
• best_of_n_worker - Best-of-n worker
• best_of_n_reviewer - Best-of-n reviewer
• best_of_n_final_applier - Best-of-n final merge

Validation Checklist

Before finishing, verify:

• task names are distinct and readable
• prompts are actionable
• dependencies reference real task ids
• no obvious circular dependency exists
• statuses are appropriate for the user's intent
• plan-mode tasks are only used where an approval pause is actually useful
• best_of_n is only used where candidate fan-out/convergence is useful
• bestOfNConfig is valid (workers present, counts > 0, final applier model present, min successful workers <= total workers)
• planThinkingLevel and executionThinkingLevel are set appropriately if different from default
• maxReviewRunsOverride is set if task needs more/fewer reviews than global default
• maxJsonParseRetries is appropriate for review complexity
• Telegram notifications are configured if user wants status updates
• ordering in idx matches the intended flow

What to Tell the User

After setup, report:

• how many tasks you created or updated
• any templates versus backlog tasks
• any important dependencies you added
• any assumptions you made while translating the source material
• any ambiguities that still need user input

Task Groups

Task Groups are virtual workflows that allow you to execute multiple related tasks together as a coordinated unit. Groups are useful when:

• Multiple tasks need to be executed together in a specific order
• Tasks share a common theme or goal
• You want to track and manage related work as a single unit

Task Group Model

Field	Meaning
id	Unique identifier
name	Display name shown on the virtual card
color	Hex color for visual identification (e.g., #6366f1)
status	active, completed, or archived
createdAt	Unix timestamp when created
updatedAt	Unix timestamp of last update
completedAt	Unix timestamp when completed (null if not done)

Group Execution

Groups execute tasks in dependency order, similar to regular workflow execution:

1. Validates all group tasks are in backlog or template status
2. Checks for external dependencies (tasks outside the group that must complete first)
3. Creates a group_tasks workflow run
4. Executes tasks in order with dependency resolution
5. Broadcasts progress updates via WebSocket

Task Group API Endpoints

Method	Path	Purpose
GET	/api/task-groups	List all task groups
POST	/api/task-groups	Create a new group
GET	/api/task-groups/:id	Get group with tasks
PATCH	/api/task-groups/:id	Update group properties
DELETE	/api/task-groups/:id	Delete group
POST	/api/task-groups/:id/tasks	Add tasks to group
DELETE	/api/task-groups/:id/tasks	Remove tasks from group
POST	/api/task-groups/:id/start	Start group execution
GET	/api/tasks/:id/group	Get task's group membership

Creating a Task Group

To create a group with tasks:

# Step 1: Create the tasks first
curl -X POST http://localhost:<port>/api/tasks \
  -H "Content-Type: application/json" \
  -d '{"name": "Task 1", "prompt": "Do thing A", "status": "backlog"}'

curl -X POST http://localhost:<port>/api/tasks \
  -H "Content-Type: application/json" \
  -d '{"name": "Task 2", "prompt": "Do thing B", "status": "backlog"}'

# Step 2: Create the group with task IDs
curl -X POST http://localhost:<port>/api/task-groups \
  -H "Content-Type: application/json" \
  -d '{"name": "Feature X", "color": "#6366f1", "taskIds": ["task-id-1", "task-id-2"]}'

Note: Tasks can only belong to ONE group at a time. Adding a task to a group automatically removes it from any previous group.

Recommended Workflow with Groups

When planning a feature that involves multiple related tasks:

1. Plan the work - Break down the feature into logical tasks
2. Create tasks - Use the task creation API to create each task
3. Create the group - Wrap related tasks in a group with a meaningful name
4. Review the plan - Open the group panel to verify task order and dependencies
5. Start execution - Click "Start Group Workflow" to execute all tasks in order

Creating a Group from Planning Chat

When using the Planning Chat's "Create Tasks" button, the agent will:

1. Analyze the planning conversation to extract implementation tasks
2. Create appropriate tasks using the API
3. Automatically create a Task Group if multiple related tasks are identified
4. Place all tasks inside the group
5. Report the created group and tasks to the user

The agent is instructed to:

• Name the group based on the feature/project being planned
• Choose an appropriate color for visual identification
• Add all related tasks to the group
• Ensure tasks have proper dependencies if specified

Group Status Lifecycle

Status	Meaning
active	Group is ready to execute or is executing
completed	All tasks in the group have finished successfully
archived	Group has been archived (tasks may still be visible)

Group Constraints

• No running workflows: A group cannot start if another workflow is already running
• Valid task status: All tasks must be in backlog or template status
• No external dependencies: Tasks cannot have unmet dependencies on tasks outside the group
• Valid container images: If using container mode, all tasks must have valid container images
• Single membership: Each task can only belong to one group at a time

Debugging Group Issues

Common issues and solutions:

Issue	Cause	Solution
"A workflow is already running"	Another workflow/groups is executing	Stop current workflow first
"Some tasks are not in backlog status"	Tasks moved to review/done/etc	Move tasks back to backlog
"external dependencies" error	Group tasks depend on non-group tasks	Complete dependencies first, or move them into the group
"invalid container images"	Container image not found	Build image or select valid image in task settings

When to Use Groups vs Individual Tasks

Scenario	Recommendation
Single independent task	Create individual task
Multiple related tasks that should run together	Create group with tasks
Tasks that can be executed in parallel	Individual tasks with dependencies
Feature with multiple subtasks	Group containing all subtasks
Template tasks for reuse	Individual template tasks (not grouped)