commit

name	commit
description	Use this skill when the user asks to "commit", "make a commit", "commit my changes", "create a commit", or invokes /commit. Detects the active VCS (git, jj, or hg), inspects the working copy, drafts a commit message in the project's standard format (terse summary + detailed paragraph + test plan), and creates the commit. Honors staged-files-only when files are already staged in git. Handles jj-specific traps (interactive editors, conflict states, the operation log, the post-commit working copy gotcha) without dropping into TUIs that block non-interactive shells.
version	0.2.0

Commit

Create a commit for the current changes in a consistent format, regardless of which version control system is in use.

Detect VCS

Try in this order; use the first that succeeds:

1. git status
2. jj status
3. hg status

Inspect changes

VCS	Status	Diff
git	git status -s	git diff --cached (staged) or git diff (unstaged)
jj	jj status	jj diff
hg	hg status	hg diff

For git, also check git diff --cached --name-only vs git diff --name-only to know whether anything is staged. If something is staged, only commit those files; if nothing is staged, git add -A first.

For jj, the entire working copy is the change — there's no staging step. jj status shows everything that will land in the commit.

For hg, hg status shows everything; hg commit commits all changes by default.

Commit message format

<terse-summary>

<detailed-summary>

Test Plan:
<test-plan>

• Terse summary (first line): one-line description, max 72 chars. This line is what shows up in jj log / git log --oneline and is the load-bearing field — make it count.
• Detailed summary: brief paragraph(s) explaining what changed and why. Terse, avoid flowery language. Bullet lists are fine for multiple discrete points.
• Test plan: how this was tested. Acceptable values:
  • CI — covered by existing CI tests.
  • Ran tests — ran the test suite locally.
  • Specific commands or manual steps if applicable.

Create the commit

Use the non-interactive form for every VCS — never invoke a command that would drop into $EDITOR, because this skill may run inside a non-interactive shell where TUIs hang.

VCS	Command
git	git commit -m "<terse>" -m "<detailed-and-test-plan>" (or use -F - and pipe a heredoc for full multi-line control)
jj	jj commit -m "$(cat <<'EOF' ... EOF)" (heredoc inside $() keeps the multi-line message intact)
hg	hg commit -m "<message>"

For multi-line messages with shell metacharacters or backticks, always use a heredoc inside $(cat <<'EOF' ... EOF) rather than escaping inline. The single-quoted 'EOF' delimiter prevents shell expansion inside the heredoc body, so backticks, $, etc. survive.

VCS notes

jj-specific traps and idioms

jj has several commands that drop into $EDITOR by default and will hang a non-interactive shell. Always pass the non-interactive equivalent.

Command	Trap	Use instead
jj describe	opens $EDITOR	jj describe -m "..." or jj describe --stdin <<<"..."
jj commit	opens $EDITOR for the new description	jj commit -m "..."
jj squash	opens $EDITOR to merge source + dest messages	jj squash -m "..." (use a fresh combined message) or jj squash --use-destination-message (keep the dest's existing message and discard the source's)
jj split	opens TUI to pick which changes go where	Don't run interactively. Either tell the user "I'll leave the split to you" or do it manually: jj new -B @ to insert an empty parent, then jj move --from @ --to @- <paths>
jj resolve	opens the configured merge tool (often a TUI)	Edit conflict markers in files directly, then jj squash the resolution into the conflicted commit
jj diffedit / jj absorb	TUIs	Avoid in scripted use

The post-commit working copy gotcha (READ THIS). After jj commit -m, jj describe -m, or jj squash -m, the working copy is left sitting on the just-finalized commit, not on a fresh empty commit. Any further edit you make becomes additional content on that same commit, not a new commit on top. This is the single most common rake to step on.

The fix: jj new immediately after every "finalize this commit" operation to create a fresh empty WC on top.

jj describe -m "..."   # set the description of @
jj new                 # CRITICAL: create a fresh WC; otherwise next
                       #           edit lands inside the just-described
                       #           commit

jj commit -m "..." does create a new empty WC automatically as part of its semantics ("commit @ and start a new one") — so you don't need jj new after jj commit. You DO need it after jj squash, jj describe, and jj edit <rev>.

When in doubt: run jj st and check what Working copy (@) reports. If it has a description that looks like the work you just finalized, you're sitting on it — jj new to escape.

The operation log is your friend. Every state-changing jj command (commit, describe, squash, rebase, abandon, even jj edit) is reversible via jj undo. If something goes wrong:

jj undo               # rewind the most recent operation
jj op log             # see the operation history
jj op restore <id>    # rewind to a specific operation (more surgical
                      # than a chain of jj undo's, especially when the
                      # operation you want to undo is several steps back)

Use this aggressively. It's especially useful when:

• A jj squash merged things you didn't want merged, or sent content to the wrong commit.
• A jj rebase produced unexpected conflicts and you want to back out.
• You ran jj abandon on the wrong commit.
• An interactive command hung and you killed it mid-state.
• You forgot jj new after a finalize operation and accumulated edits in the wrong commit.

jj op restore <id> is often cleaner than jj undo-ing N times. Find the snapshot before the bad operation in jj op log and restore directly.

Conflict states are silent. A jj rebase (or implicit rebase from jj edit-ing a non-leaf commit) can leave descendants in conflict without aborting. Always check jj st after operations that touch the commit graph; look for (conflict) markers. Resolve by editing the conflict markers in-place. jj uses its own conflict marker format for 2-sided conflicts:

<<<<<<< conflict 1 of 1
+++++++ <commit-id> "description" (rebase destination)
<dest content>
%%%%%%% diff from: <ancestor> ... to: <source>
 <unchanged context>
-<removed line>
+<added line>
>>>>>>> conflict 1 of 1 ends

Pick the right side (or merge them by hand), delete all the marker lines, then jj squash the WC into the conflicted commit to fold the resolution back.

jj edit <rev> is destructive. It makes the named rev your working copy, and every save mutates that rev's contents directly. Descendants get auto-rebased and may conflict. Prefer jj new <rev> ("branch off this rev as a new working commit") unless the user explicitly wants to amend <rev> in place.

jj commit vs jj describe:

• jj commit -m "..." finalizes the current WC as a commit and creates a fresh empty WC on top. Use this when the work is done and you want to start the next thing.
• jj describe -m "..." only sets the description of the current WC; doesn't create a new WC. Use this when you want to keep iterating on the same change. Follow with jj new if you want to start a new change after.

Verify the squash landed where you think. Especially when iterating on a stack, run jj log -r 'mutable() & ~empty()' after a squash to confirm the destination commit's description and content are what you expect. Easy mistake: squashing into @- (the parent of WC) lands in the wrong commit if you're confused about where the WC is parented.

Stack inspection cheat sheet:

jj log -r 'mutable()'                # all your local commits up to the trunk
jj log -r 'mutable() & ~empty()'     # same, but skip empty WC commits
jj log -r '@-..@ | conflicts()'      # focus on conflicted commits
jj st                                # working copy + parent summary
jj diff -r <rev>                     # what's in a specific commit
jj diff -r <rev> --stat              # just the file list

git-specific notes

• git commit -m only takes the first -m as the subject. Use multiple -m flags to add paragraphs (each -m becomes a separate paragraph), OR pipe a full message via git commit -F -.
• If the user has staged files, commit only those (git commit without -a). If nothing is staged, git add -A && git commit ....
• Don't git push unless the user explicitly asks.

hg-specific notes

• hg commit with no -m opens $EDITOR; always pass -m "...".
• hg commit commits everything by default; there's no staging area.

Example

Add user authentication middleware

JWT auth for API routes. Middleware validates tokens on protected
endpoints and attaches user context to requests.

Test Plan:
Ran tests

When things go wrong

• A jj command hung? It probably opened $EDITOR or a TUI. Kill it (Ctrl-C if interactive; the operation log will show whether the state was committed). Then re-run with the appropriate -m / --use-destination-message / --stdin flag.
• Created the wrong commit? jj undo (jj) or git reset --soft HEAD~1 (git) or hg rollback (hg, if no other operations have happened since).
• Working copy in a conflict state after a rebase? Inspect jj st for affected files, edit the conflict markers, jj squash to fold the resolution back into the conflicted commit. Or jj undo the rebase if you want to back out entirely.
• Forgot jj new after jj describe/jj squash and now your latest edits landed in the wrong commit? Either: (a) jj split <paths> to peel them out into a fresh commit (non-interactive form); or (b) jj op restore <pre-edit-snapshot> to rewind, then redo with proper jj new discipline.
• Pushed to the wrong branch? Out of scope for this skill — handle separately.