Conducts comprehensive network penetration tests against authorized target environments by performing host discovery, port scanning, service enumeration, vulnerability identification, and controlled exploitation to assess the security posture of network infrastructure. The tester follows PTES methodology from reconnaissance through post-exploitation and reporting. Activates for requests involving network pentest, infrastructure security assessment, internal network testing, or external perimeter testing.
Conducts comprehensive network penetration tests against authorized target environments by performing host discovery, port scanning, service enumeration, vulnerability identification, and controlled exploitation to assess the security posture of network infrastructure. The tester follows PTES methodology from reconnaissance through post-exploitation and reporting. Activates for requests involving network pentest, infrastructure security assessment, internal network testing, or external perimeter testing.
Assessing the security posture of internal or external network infrastructure before or after deployment
Validating firewall rules, network segmentation, and access controls under realistic attack conditions
Identifying exploitable vulnerabilities in network services, protocols, and configurations
Meeting compliance requirements for PCI-DSS, HIPAA, SOC 2, or ISO 27001 that mandate periodic penetration testing
Evaluating the effectiveness of IDS/IPS, SIEM, and SOC detection capabilities against real attack traffic
Do not use for testing networks without explicit written authorization from the asset owner, against production systems without a pre-approved change window and rollback plan, or for denial-of-service testing unless explicitly scoped and authorized.
Prerequisites
Signed Rules of Engagement (RoE) document specifying target IP ranges, excluded hosts, testing hours, and emergency contacts
Written authorization letter (get-out-of-jail letter) from the network owner
Dedicated testing laptop with Kali Linux or equivalent distribution with up-to-date tools
VPN or direct network access to the target scope as defined in the RoE
Out-of-band communication channel with the client's incident response team
Scope document listing in-scope IP ranges, domains, and any explicitly excluded systems (medical devices, SCADA, critical infrastructure)
Workflow
Step 1: Pre-Engagement and Scope Validation
Validate the scope by confirming IP ranges with the client. Verify that all IP addresses in scope are owned by the client using ARIN/RIPE WHOIS lookups. Confirm testing windows, escalation procedures, and any sensitivity constraints. Set up the testing environment with a dedicated VM, VPN connection, and logging enabled on all tools. Create a timestamped activity log that records every command executed, every scan launched, and every exploit attempted throughout the engagement.
Step 2: Host Discovery and Network Mapping
Identify live hosts within the authorized scope using layered discovery techniques:
ICMP sweep: nmap -sn -PE -PP -PM 10.10.0.0/16 -oA discovery_icmp to find hosts responding to ping
ARP scan (internal networks): nmap -sn -PR 10.10.0.0/24 -oA discovery_arp or arp-scan -l for local subnet enumeration
TCP SYN discovery: nmap -sn -PS21,22,25,80,443,445,3389,8080 10.10.0.0/16 -oA discovery_tcp to find hosts with ICMP blocked
Consolidate live hosts into a target list. Map the network topology by identifying gateways, VLAN boundaries, and trust relationships using traceroute and SNMP community string guessing where authorized.
Step 3: Port Scanning and Service Enumeration
Perform detailed port scanning on discovered hosts:
Full TCP scan: nmap -sS -p- --min-rate 1000 -T4 -oA full_tcp <target> to identify all open TCP ports
Top UDP ports: nmap -sU --top-ports 200 -T4 -oA top_udp <target> for commonly exploitable UDP services
Service version detection: nmap -sV -sC -p <open_ports> -oA service_enum <target> to fingerprint service versions and run default NSE scripts
OS fingerprinting: nmap -O --osscan-guess -oA os_detection <target> to identify operating systems
Enumerate discovered services in depth using protocol-specific tools:
SMB: enum4linux -a <target>, crackmapexec smb <target> --shares
SNMP: snmpwalk -v2c -c public <target>
DNS: dig axfr @<dns_server> <domain> for zone transfer attempts
Correlate discovered service versions against known vulnerability databases:
Run nmap --script vuln -p <ports> <target> for NSE vulnerability scripts
Use searchsploit <service> <version> to query the Exploit-DB offline database
Cross-reference with NVD (National Vulnerability Database) and CVE records for confirmed vulnerabilities
Check for default credentials on management interfaces (Tomcat Manager, Jenkins, phpMyAdmin, database consoles)
Test for common misconfigurations: anonymous FTP, open SMTP relays, unrestricted SNMP communities, NFS exports without authentication
Prioritize vulnerabilities by CVSS score, exploitability, and business impact. Document each finding with CVE identifier, affected host, service, and version.
Step 5: Exploitation
Attempt controlled exploitation of validated vulnerabilities using the principle of minimum necessary access:
Metasploit Framework: msfconsole with appropriate exploit modules matched to confirmed vulnerabilities. Set RHOSTS, RPORT, and payload options. Prefer bind/reverse TCP Meterpreter for post-exploitation flexibility.
Manual exploitation: Use public proof-of-concept exploits from Exploit-DB after code review. Compile and modify as needed for the target environment.
Credential attacks: Use hydra or crackmapexec for password spraying against discovered services (SSH, RDP, SMB, HTTP basic auth) using common credential lists. Respect lockout policies.
Pass-the-hash / relay: If NTLM hashes are obtained, attempt pass-the-hash with impacket-psexec or relay attacks with impacket-ntlmrelayx where SMB signing is disabled.
Document every exploitation attempt including failures. Capture screenshots of successful compromises showing hostname, IP, current user, and privilege level.
Step 6: Post-Exploitation and Pivoting
After gaining access to a host, demonstrate business impact:
Privilege escalation: Check for local privilege escalation paths using linpeas.sh (Linux) or winPEAS.exe (Windows). Look for misconfigured services, SUID binaries, unquoted service paths, or kernel exploits.
Credential harvesting: Extract stored credentials from memory (mimikatz), files (config files, browser stores), or cached hashes (hashdump).
Lateral movement: Use obtained credentials to pivot to additional systems. Test network segmentation by attempting to reach out-of-scope networks from compromised hosts.
Data access demonstration: Identify sensitive data accessible from compromised systems (PII databases, file shares, backup files) and document access without exfiltrating actual data.
Maintain detailed notes on every pivot point, credential obtained, and system accessed to build the attack chain narrative.
Step 7: Cleanup and Reporting
Remove all testing artifacts from compromised systems:
Delete uploaded tools, shells, and temporary files
Remove any accounts created during testing
Revert configuration changes made during exploitation
Verify cleanup by re-scanning affected hosts
Prepare the penetration test report with executive summary, methodology description, finding details with CVSS scores, proof-of-concept evidence, and prioritized remediation recommendations.
Key Concepts
Term
Definition
Rules of Engagement (RoE)
Formal document defining the scope, boundaries, testing hours, authorized actions, and escalation procedures for a penetration test
Pivot
Using a compromised host as a relay point to access additional network segments not directly reachable from the tester's position
Service Enumeration
The process of identifying running services, their versions, and configurations on discovered hosts to map the attack surface
Credential Spraying
Testing a small number of commonly used passwords against many accounts simultaneously to avoid account lockout thresholds
CVSS
Common Vulnerability Scoring System; an industry-standard framework for rating the severity of vulnerabilities on a 0-10 scale
Lateral Movement
Techniques used to move from one compromised system to another within a network, expanding the scope of access
Post-Exploitation
Activities performed after initial compromise including privilege escalation, persistence, credential harvesting, and data access
Tools & Systems
Nmap: Network discovery, port scanning, service enumeration, and vulnerability detection via the Nmap Scripting Engine (NSE)
Metasploit Framework: Exploitation framework providing exploit modules, payloads, encoders, and post-exploitation tools for validated vulnerability exploitation
CrackMapExec: Swiss-army knife for Windows/Active Directory environments supporting SMB, WinRM, LDAP, and MSSQL enumeration and exploitation
Impacket: Python library providing low-level programmatic access to network protocols (SMB, MSRPC, Kerberos) used for relay attacks and remote execution
Burp Suite: Web application proxy used when network services expose HTTP-based management interfaces
Common Scenarios
Scenario: Internal Network Penetration Test for a Financial Institution
Context: The client is a mid-size bank requiring PCI-DSS compliance. Scope includes the internal corporate network (10.10.0.0/16), excluding payment processing systems in a separate VLAN. Testing window is Monday-Friday 20:00-06:00 to minimize impact on operations.
Approach:
Perform ARP-based host discovery on accessible subnets and TCP SYN discovery for hosts with ICMP disabled
Conduct full port scans on all discovered hosts, prioritizing Windows servers and domain controllers
Enumerate SMB shares, SNMP communities, and web management interfaces for quick wins
Identify and exploit an unpatched Apache Tomcat instance with default credentials to gain initial foothold
Escalate privileges via a local Windows kernel vulnerability, then extract cached domain credentials with Mimikatz
Demonstrate lateral movement to the database server containing customer records, proving inadequate network segmentation
Document the complete attack path from initial access to sensitive data, with remediation steps for each vulnerability
Pitfalls:
Scanning too aggressively during business hours and triggering IDS alerts or service disruptions
Failing to verify that all target IPs are actually owned by the client before scanning
Not documenting exploitation attempts that failed, missing the opportunity to report on effective controls
Forgetting to clean up Meterpreter sessions and uploaded tools after testing
Output Format
## Finding: Unpatched Apache Tomcat with Default Credentials
**ID**: NET-001
**Severity**: Critical (CVSS 9.8)
**Affected Host**: 10.10.5.23 (tomcat-prod.internal.corp)
**Service**: Apache Tomcat 8.5.31 on port 8080
**CVE**: CVE-2019-0232
**Description**:
The Apache Tomcat instance on 10.10.5.23:8080 is running version 8.5.31, which is
vulnerable to CVE-2019-0232 (remote code execution via CGI Servlet). Additionally,
the Tomcat Manager interface is accessible with default credentials (tomcat:tomcat),
allowing deployment of arbitrary WAR files.
**Proof of Concept**:
1. Accessed http://10.10.5.23:8080/manager/html with credentials tomcat:tomcat
2. Deployed malicious WAR file containing a reverse shell payload
3. Obtained command execution as NT AUTHORITY\SYSTEM
**Impact**:
Full system compromise of the Tomcat server. From this host, the tester
pivoted to 3 additional systems on the same subnet using harvested credentials,
ultimately accessing the customer database containing 50,000+ records.
**Remediation**:
1. Immediately change default Tomcat Manager credentials
2. Upgrade Apache Tomcat to the latest stable release (currently 10.1.x)
3. Restrict access to the Tomcat Manager interface to authorized management IPs only
4. Implement network segmentation between web servers and database tier
