菜单
Use when querying or changing UniFi Network configuration with `unifly`; inspecting firewall policies, networks, clients, zones, or site settings; using `scripts/unifi-ssh.sh`; or diagnosing a UniFi API limitation. Do NOT use for Kubernetes networking or application HTTPRoutes.
默认使用会先检查来源的 Prompt；你也可以切换为直接命令，或下载本地副本。
决定是否安装前，请先阅读 SKILL.md，以及 SkillsMP 当前展示的配套文件。
用 Codex 或 Claude 帮你安装 复制这段 Prompt，粘贴到 Codex、Claude 或其他助手里，让它检查 Skill 页面并帮你完成安装。
直接命令不会经过审查 Prompt；运行前请先检查来源。
npx skills add https://github.com/rcdailey/home-ops --skill unifi-operations命令会保持在同一行。复制前请横向滚动并检查完整内容。
想先保存到本地？可下载 SkillsMP 当前能够提供的文件。
Use when adding, restructuring, or reviewing an application under `kubernetes/apps/`; creating Flux Kustomizations, HelmReleases, PVCs, ExternalSecrets, HTTPRoutes, or app-template values; or choosing repository patterns for a new workload. Do NOT use for a narrow value change whose pattern is already established in the app.
Use when diagnosing DNS resolution failures, investigating blocked domains, debugging website or app connectivity problems reported by users, querying Blocky DNS query logs, or editing Blocky allowlist/denylist configuration in `kubernetes/apps/dns-private/blocky/`. Covers `./scripts/hops.sh dns` subcommands (`search`, `logs`, `blocked`, `test`) and the `log_entries` table in the Blocky CNPG cluster. Triggers on phrases like "site X is broken", "DNS isn't working", "why is this domain blocked", "check Blocky logs", "allowlist this domain", or any edit to `blocky/data/config.yaml`. Do NOT use for authoritative/external-dns troubleshooting (different providers, different tooling).
Use when testing, benchmarking, or assessing SSDs and HDDs; interpreting SMART or fio results; running badblocks; working through a USB-to-SATA dock; or invoking `/drive-test`. Do NOT use for Kubernetes or Ceph volume performance diagnosis.
正在显示 SKILL.md
| name | unifi-operations |
| description | Use when querying or changing UniFi Network configuration with `unifly`; inspecting firewall policies, networks, clients, zones, or site settings; using `scripts/unifi-ssh.sh`; or diagnosing a UniFi API limitation. Do NOT use for Kubernetes networking or application HTTPRoutes. |
Use unifly before lower-level access. Run the relevant --help, request structured output when
available, and read current state before changing it.
unifly for firewall policies, networks, clients, zones, and settings.scripts/unifi-ssh.sh only when device-level inspection is required.unifly lacks the operation and the task cannot be
completed through supported interfaces.Do not replace a failed supported operation with raw HTTP or database access. Stop and report the failure unless a known limitation below applies.
unifly settings set <key> <field> <value> uses the session API. Re-read the setting after every
mutation and verify the requested value took effect.
The mDNS site setting is a known exception. All available API paths silently ignore changes to
enabled_for_network_ids. Change mDNS VLAN scope through the UniFi UI at Settings, Networks,
Gateway mDNS Proxy. Do not claim an API mutation succeeded based only on its exit status.
The UDM is at 192.168.1.1. Its MongoDB service uses port 27117 and database ace. Treat direct
queries as a read-only diagnostic fallback unless the user explicitly approves a mutation and no
supported interface exists.