collision

name	collision
description	Enable contact detection using the correct contact material for NSC or SMC systems.
compatibility	pychrono >= 8.0
metadata	{"domain":"mbs"}

Skill: MBS Collision

Purpose

Enable contact detection between bodies using the correct contact material for the system type (NSC or SMC), and attach collision shapes to bodies.

When to Use

When bodies should interact physically through contacts (floors, walls, falling objects, mixers, etc.).

Key Concepts

Rule: Material must match system type

• ChSystemNSC → use ChContactMaterialNSC
• ChSystemSMC → use ChContactMaterialSMC Mixing them causes silent errors or crashes.

Required: enable the collision system

sys.SetCollisionSystemType(chrono.ChCollisionSystem.Type_BULLET)

This must be called once on the system before any bodies with collision are stepped.

NSC (Non-Smooth Contact)

Material

friction = float     # friction coefficient
restitution = float  # restitution coefficient
mat = chrono.ChContactMaterialNSC()
mat.SetFriction(friction)
mat.SetRestitution(restitution)

Easy bodies (material passed to factory)

# Sphere
sph_radius = float   # sphere radius [m]
sph_density = float  # sphere density [kg/m³]
sphere = chrono.ChBodyEasySphere(sph_radius, sph_density, True, True, mat)
sphere.SetPos(chrono.ChVector3d(x, y, z))
sys.Add(sphere)

# Box
box_sx = float      # box width [m]
box_sy = float      # box height [m]
box_sz = float      # box depth [m]
box_density = float # box density [kg/m³]
box = chrono.ChBodyEasyBox(box_sx, box_sy, box_sz, box_density, True, True, mat)
sys.Add(box)

# Cylinder
cyl_radius = float   # cylinder radius [m]
cyl_height = float   # cylinder height [m]
cyl_density = float  # cylinder density [kg/m³]
cyl = chrono.ChBodyEasyCylinder(chrono.ChAxis_Y, cyl_radius, cyl_height, cyl_density, True, True, mat)
sys.Add(cyl)

Visual material (texture on contact body)

vis_mat = chrono.ChVisualMaterial()
vis_mat.SetKdTexture(chrono.GetChronoDataFile("textures/concrete.jpg"))
body.GetVisualShape(0).SetMaterial(0, vis_mat)

SMC (Smooth/Penalty Contact)

Material

friction = float  # friction coefficient
mat = chrono.ChContactMaterialSMC()
mat.SetFriction(friction)
# mat.SetYoungModulus(2e7)   # optional
# mat.SetPoissonRatio(0.3)   # optional

Manual body with explicit collision shapes

mass = float    # body mass [kg]
radius = float  # collision sphere radius [m]
body = chrono.ChBody()
body.SetMass(mass)
body.SetPos(chrono.ChVector3d(x, y, z))

# Add collision shape (SMC material embedded in shape)
shape = chrono.ChCollisionShapeSphere(mat, radius)
body.AddCollisionShape(shape)
body.EnableCollision(True)

# Add visual shape separately
sphere_vs = chrono.ChVisualShapeSphere(radius)
sphere_vs.SetTexture(chrono.GetChronoDataFile("textures/bluewhite.png"))
body.AddVisualShape(sphere_vs)

sys.AddBody(body)

SMC collision shapes

chrono.ChCollisionShapeSphere(mat, radius)
chrono.ChCollisionShapeBox(mat, sx, sy, sz)
# Attach at offset: body.AddCollisionShape(shape, chrono.ChFramed(pos, rot))

When to Use NSC vs SMC

Scenario	Recommended
Rigid/hard impacts (balls, blocks)	NSC
Many simultaneous contacts (granular)	NSC
Soft/compliant contacts	SMC
Need continuous force (no impulsive)	SMC