executing-plans

name	executing-plans
description	Use when you have a plan directory from decomposing-specs and need to execute it — loads phases on demand, dispatches phase-elaborator for sketched phases, runs implementers with size-scaled phase reviews, and validates the full spec at the end

Executing Plans

Orchestrate execution of a multi-file plan produced by decomposing-specs. The plan lives at docs/plans/<topic>/ with plan.md, standards.md, and phases/NN-<name>.md files. Phase 1 and Verification are pre-elaborated; phases 2..N-1 start as sketches and are elaborated just-in-time. The orchestrator never writes code — it only coordinates.

Efficiency posture: subagent dispatch is expensive. Load only what you need (plan.md + the active phase file), batch consecutive cohesive tasks, scale phase-boundary review to phase size, and gate re-reviews on severity. Reviewer cycles can outnumber implementer cycles if you're not careful.

Process

State-machine diagram: flow.md. Open it once for orientation if you need it.

Step 1: Setup

Read only these two files into context at startup:

• docs/plans/<topic>/plan.md — phases table, summaries, coverage matrix
• docs/plans/<topic>/standards.md — shared codebase context

Do not read all phase files at startup. Each phase file is loaded only when its turn comes.

Extract from plan.md:

• Ordered list of phases with file paths and status (elaborated | sketch)
• Coverage matrix (full EARS list mapped to phases + tentative task numbers)
• Source spec path

Step 2: Per-Phase Loop

For each phase in order:

2a. Elaborate if needed

If the phase status is sketch, dispatch the phase-elaborator agent:

Spec path: <from plan.md>
Plan path: docs/plans/<topic>/plan.md
Standards path: docs/plans/<topic>/standards.md
Phase file path: docs/plans/<topic>/phases/NN-<name>.md
Prior phase summary: <one paragraph: what phase N-1 actually built — files created/modified, key decisions, any drift from its sketch>
Repo root: <pwd>

The elaborator overwrites the sketch in-place and returns a short summary. If it reports drift (anticipated files turned out wrong, EARS coverage shift, task count changed), update plan.md's phase row + coverage matrix accordingly. If the drift is structural (new dependency between phases, scope change), pause and surface to the user.

If the phase is already elaborated (Phase 1 or Verification), skip this step.

2b. Read the phase file

Read docs/plans/<topic>/phases/NN-<name>.md into context now. This is the only phase file in your context — older phase files were dropped after their phase completed (they're on disk if needed).

2c. Execute tasks

Walk tasks top to bottom within the phase. For each task (or batch — see below), dispatch the implementer agent with:

1. Task text — full content from the phase file (files, codebase context deltas, verification cycles, code snippets). For a batch, inline all tasks in order.
2. Standards reference — paste the relevant rows from standards.md (or hand the path; small files are fine to inline). Implementers must cite standards.md for shared context but only act on the deltas in the task.
3. Context — what this task is building toward, what prior tasks built, relevant architectural decisions from the spec
4. Constraints — working directory, commit conventions, files not to touch

Batched Task Dispatch (sequential)

Default to batching when consecutive sequential tasks within a phase share context. One implementer running 2-4 cohesive tasks is dramatically cheaper than 2-4 separate dispatches — context loads once.

Batch consecutive tasks N..N+k when ALL of these hold:

• Same phase, in order, no [P] markers between them
• Their Files: lists overlap by ≥50%, OR they share the same pattern-to-mirror citation
• Combined work ≤4 hours of implementer time (roughly 2-4 tasks)
• No task in the batch is flagged **Risk:** high

The implementer reports per-task DONE/BLOCKED in the result. If any task in the batch returns BLOCKED or NEEDS_CONTEXT, the implementer reports which task and what it completed; resume the rest as a smaller batch or individual dispatch.

Do NOT batch when tasks touch disjoint subsystems, an intermediate task is high-risk, or a task is flagged **Risk:** high.

Parallel Task Dispatch

Tasks marked [P] within a phase have no intra-phase dependencies and may be dispatched concurrently:

1. Identify all [P] tasks in the phase
2. Bundle small [P] tasks before parallelizing. If two [P] tasks are each <1 hour and touch disjoint files, hand both to a single implementer to run sequentially. Reserve concurrent dispatch for [P] tasks ≥1 hour each or that benefit from isolation.
3. Dispatch the resulting set (some bundled, some solo) concurrently
4. Wait for all to complete before proceeding
5. Non-[P] tasks execute sequentially (or batched) after all parallel tasks complete

If any parallel task fails or blocks, handle individually — don't block the others. Concurrent dispatch is advisory; sequential is the safe fallback.

Handling Implementer Results

Status	Response
DONE	Proceed to next task or phase review
DONE_WITH_CONCERNS	Read concerns. Correctness/scope issues → dispatch fix. Observations → note and proceed.
NEEDS_CONTEXT	Provide missing context (often a row from standards.md), re-dispatch same task
BLOCKED	Context problem → provide more context. Too hard → break task down. Plan wrong → generate fix task or re-elaborate phase.

Track any Ephemeral Tests entries reported by implementers. If the report lists anything other than None, record the file path, test name, originating task, and whether durable behavioral coverage already exists. Do not treat the presence of ephemeral tests as a task failure during the phase, but do not lose the list — final validation must clean them up.

If an implementer fails the same task 3 times, stop execution and report to the user.

2d. Phase boundary review

After all tasks in the phase complete, scale review depth to phase size and risk.

One-Phase-Ahead Elaboration

When the current phase will run Tier B or Tier C review and the next phase exists with status sketch, dispatch the next phase's phase-elaborator at the same time as the phase-boundary reviewers. This is the only permitted speculative elaboration: at most one upcoming phase, only while review agents are already running, and never while current-phase implementation is still in progress.

Use the normal elaborator prompt from Step 2a, with the current phase summary marked as pending review:

Prior phase summary: <one paragraph: what phase N actually built before review — files created/modified, key decisions, any known concerns>
Review status: Phase N review is in progress; this elaboration may need a small follow-up adjustment if review fixes materially change files, APIs, dependencies, or EARS coverage.

Do not read the next phase file into the orchestrator's context yet. Let the elaborator overwrite the sketch in-place and report drift in the background while the current phase review continues.

After review and any review-triggered fixes complete:

• If the review caused no material implementation changes, keep the elaborated next phase and process any drift report normally before entering that phase.
• If fixes materially changed files, APIs, dependencies, task ordering, or EARS coverage that the next phase depends on, send the final phase summary and changed-file delta back to the same phase-elaborator for a quick adjustment before Step 2b reads the next phase file.
• Before entering the next phase, update plan.md so the phase row has status elaborated and the final task count from the elaborator. If the material changes alter phase boundaries or the coverage matrix, update those rows too. Structural scope changes still pause for the user.

If the current phase is Tier A, skip this optimization; there is no review window to hide the elaboration behind, so the normal Step 2a just-in-time elaboration is cheaper and simpler.

Review Tier Selection

Phase shape	Review tier
1-2 tasks, no **Risk:** high flag	Tier A — defer. Skip phase-boundary review entirely. The final spec-reviewer pass at Step 3 covers correctness; design/security/test concerns fold into the next phase's review or the final pass.
1-2 tasks BUT flagged **Risk:** high	Tier B — focused. Dispatch only the reviewers relevant to the risk (e.g., security-reviewer + correctness-reviewer for an auth boundary). Skip the full 4-agent suite.
3+ tasks, normal risk	Tier C — full suite (4 reviewers in parallel + test-coverage-reviewer).
3+ tasks, includes **Risk:** high	Tier C with extra weight on the relevant specialized reviewer.

Stage 1: Parallel Code Review (Tier C)

Dispatch all 4 specialized reviewers in parallel, each with the files changed during the phase, the phase file (for plan alignment), and the standards file (for convention reference):

1. correctness-reviewer — plan alignment, logic, completeness, edge cases
2. design-reviewer — patterns, naming, reuse, deduplication, complexity
3. security-reviewer — vulnerabilities, input validation, auth, secrets
4. test-quality-reviewer — assertion quality, test design, edge cases, anti-patterns

Wait for all 4. Aggregate and deduplicate findings: when multiple reviewers flag the same file:line, merge into one finding noting which reviewers reported it.

• ALL APPROVED → proceed to Stage 2
• ANY ISSUES → dispatch implementer with deduplicated findings, then continue the same reviewer agents via SendMessage for re-review. Only re-run reviewers that failed.
• Severity-gated re-review. Only re-dispatch a reviewer when its findings include CRITICAL or MAJOR. MINOR/style/nit findings are noted in the phase report and not re-reviewed — they fold into final spec review or are accepted.
• Re-review fix cap: 2 cycles per phase. After 2 cycles, accept remaining MAJOR-and-below findings as noted concerns. CRITICAL findings still block — escalate to user.

Stage 2: Test Coverage Review

After code review passes, dispatch test-coverage-reviewer with:

• EARS requirements mapped to this phase (from the coverage matrix in plan.md)
• Files changed during the phase
• Test files created during the phase

PASS → proceed to next phase. FAIL → dispatch implementer to write missing tests, continue the same coverage reviewer for re-check. Max 2 fix cycles.

Skip Stage 2 in Tier A. The final spec-reviewer at Step 3 covers requirement-to-test mapping for deferred phases.

Spec compliance is not checked at phase boundaries — only at Step 3 (final validation).

2e. Drop the phase file

After phase review passes, the phase file's contents are no longer needed in context. The next phase's elaboration + reading replaces it. (You don't have to actively unload — just don't carry phase N's task text forward.)

Step 3: Final Validation

After all phases complete, run three-stage final validation.

Stage 1: Ephemeral Test Cleanup

Before running final CI, remove or rewrite any tests marked or reported as ephemeral during implementation.

Dispatch an implementer with:

• The accumulated Ephemeral Tests list from task reports
• All test files created or modified during execution
• The phase files for completed phases, or the relevant task excerpts containing Test durability: ephemeral
• The EARS requirements and coverage matrix from plan.md

The cleanup implementer must:

1. Delete ephemeral tests that only assert implementation details or temporary scaffolding
2. Replace an ephemeral test with durable behavioral coverage when deleting it would leave an EARS requirement without meaningful test coverage
3. Preserve tests marked durable unless they are mislabeled implementation-detail assertions, in which case rewrite them as behavioral tests
4. Run the affected test files after cleanup
5. Commit cleanup changes with a plain-English message if files changed
6. Report whether any ephemeral tests remain

If no implementer reported ephemeral tests, still do a lightweight scan of changed test files for obvious scaffolding tests: file-existence checks, symbol-name checks, helper-call-only assertions, module-structure assertions, empty stubs, and tautological mock assertions. If found, dispatch the cleanup implementer with those candidates.

If ephemeral tests remain after 2 cleanup attempts, stop final validation and surface the remaining file/test names plus the reason they could not be removed. Do not run final CI/spec compliance while known ephemeral tests remain.

Stage 2: CI Verification

Run the project's full test suite, linter, formatter, and typechecker (commands from standards.md). If anything fails, dispatch implementer to fix. Repeat until green or 3 attempts, then report to user.

Stage 3: Full Spec Compliance

Different from phase reviews. Phase reviews check "did we build what the plan said?" This checks "did we satisfy the original spec?"

Dispatch spec-reviewer with:

• Complete EARS requirements list from the source spec (not the plan)
• Coverage matrix from plan.md
• All files created or modified during execution

It validates:

• Every EARS requirement has a working implementation
• No requirement was lost between spec → plan → code
• Spec non-goals and constraints are not broken

Deviation tolerance: implementations that deviate from the plan are acceptable if the EARS requirement is satisfied and no unrelated functionality breaks.

Remediation

If gaps are found:

1. Take the unmet requirements
2. Generate supplementary tasks (use the elaborated phase format — verification cycles, codebase context deltas, commands)
3. Execute them sequentially with the same implementer dispatch pattern
4. Re-run CI verification, then final spec review

Max 3 remediation cycles. If gaps remain, escalate to auto-debugger.

Auto-Debug Escalation

Dispatch auto-debugger as a last resort. Provide:

• Source spec (EARS requirements)
• Spec-reviewer's failure report
• All files created or modified during execution
• CI output (if relevant)

Critical: auto-debugger gets fresh context — do NOT continue an existing agent or include prior remediation history. Phase-boundary reviewers reuse context for focused re-checks; auto-debugger is the opposite. Fresh context avoids retry loops.

Handling the Verdict

Verdict	Interactive (user present)	Autonomous (coder-task)
RETRY_TASK	Dispatch new implementer with fix plan + current diff, re-run final validation (one attempt)	Same
BLOCK_TASK	Mark task blocked with root cause, continue with remaining work, report blocked items at end	Same
NEEDS_HUMAN	Stop, report root-cause analysis, wait for guidance	Do NOT stop. Post root-cause analysis + specific questions to the GitHub issue. Treat affected tasks as BLOCK_TASK. Continue with remaining unblocked work. Note the gap in the PR description.

Common Mistakes

Mistake	Fix
Reading all phase files at startup	Load only plan.md and standards.md initially. Phase files load one at a time when their turn comes.
Executing a sketched phase without elaborating	If plan.md shows status sketch for the upcoming phase, dispatch phase-elaborator first.
Pre-elaborating future phases speculatively	Only elaborate one phase ahead during Tier B/C phase review. If review fixes materially change the prior phase, send a follow-up adjustment to the elaborator before reading the next phase.
Ignoring elaborator drift reports	If phase-elaborator reports the sketch was wrong, update plan.md's phase row + coverage matrix before continuing.
Orchestrator writes code itself	Only dispatch agents — never write code
One implementer dispatch per task when consecutive tasks share context	Batch consecutive cohesive tasks (≤4 hrs, overlapping files) into one implementer call
Running the full 4-agent suite on a 1-task phase	Use Tier A (defer); the final spec-reviewer covers correctness anyway
Re-dispatching reviewers for MINOR findings	Severity-gate re-review to CRITICAL/MAJOR only
Two [P] tasks each <1 hr dispatched as two parallel agents	Bundle into one implementer running sequentially
Re-running all reviewers when only some failed	Only re-run reviewers that returned ISSUES
Running spec-reviewer at a phase boundary	Spec compliance is checked only during final validation
Pasting the plan directory path instead of task text into the implementer prompt	Inline the task block + relevant standards rows. Implementers don't read plan files.
Ignoring DONE_WITH_CONCERNS	Read concerns before deciding to proceed
Retrying a blocked implementer without changes	Change something: more context, smaller task, or re-elaborate the phase
Treating ephemeral TDD tests as final coverage	Track them from implementer reports and remove or replace them before final CI
Final review checks plan compliance, not spec	Final review must check EARS requirements from the spec
Including prior attempts in auto-debugger prompt	Auto-debugger must get fresh context — spec, failures, code only
Blocking all parallel tasks when one fails	Handle parallel task failures individually after all resolve