example-ios-feature-dev

name	example-ios-feature-dev
description	Use when building or changing a feature inside examples/ios/RemoExamplePackage/ and you need the agentic dev loop — register Remo capabilities for the new surface, then drive and validate it with the remo CLI plus XcodeBuildMCP.

Example iOS Feature Dev

Use this skill when working on the bundled example app at examples/ios/ as a Remo repo contributor. It assumes the SDK itself already builds — its job is the UI feature loop on top.

This skill is repo-internal. Downstream projects consuming the Remo SDK should use remo-setup / remo-capabilities / remo instead.

When to use

• Adding or changing a screen, store, or controller under examples/ios/RemoExamplePackage/Sources/RemoExampleFeature/
• Redesigning an existing demo (e.g. the UIKitDemo* grid) to match a Figma mock
• Any example-app task where you need an agent to both drive state and visually confirm the result

Prerequisites

• XcodeBuildMCP available — always load the xcodebuildmcp-cli skill before calling any XcodeBuildMCP tool (required by AGENTS.md).
• Remo CLI reachable at .remo/bin/remo or on $PATH.
• SDK XCFramework built for the simulator (see step 3 caveat).
• For Figma-driven work, load figma:figma-implement-design first to pull design context.

The loop

scope → register → build → connect → drive/capture → iterate → report

1. Scope the surface

• Read the current implementation of the feature you are changing. For UIKit demos, start from UIKitDemoViewController.swift and the matching *+Remo.swift file — that pair is the template for everything below.
• Identify what the agent needs to be able to do to verify the change: navigation (pick tab, scroll), reads (what is visible, how many items), writes (append, reset, seed).
• Sketch the capability list before touching code. Prefer extending the existing grid.* / <feature>.* namespace over inventing a new one.

2. Register capabilities first

Mirror the pattern in examples/ios/RemoExamplePackage/Sources/RemoExampleFeature/UIKitDemo/UIKitDemoViewController+Remo.swift:

• Put everything behind #if DEBUG. Use the #Remo { … } island — do not wrap nested code in manual #if DEBUG blocks.
• Group names in a <Feature>CapabilityNames enum using <feature>.<group>.<action> (e.g. grid.tab.select).
• Declare RemoCapability types with Request / Response structs that are Encodable / Decodable, Equatable, Sendable.
• Register handlers inside #remoScope(scopedTo: self) { … } so they tear down with the owning object.
• Funnel every handler through a handle<Feature>Capability { … } helper that maps thrown …CapabilityError cases to a structured error response with a status or error field.
• UIKit access must run on the main actor. Use a *CapabilityBridge wrapper (see UIKitDemoCapabilityBridge) so background #remoCap callbacks hop to MainActor cleanly.

Good capabilities to register for a new screen:

• navigation — select tab, push/pop, scroll to position
• state reads — which items are visible, current tab, totals
• state writes / seeding — append, reset, force empty/error
• UI actions — tap specific controls that are hard to reach visually

If a capability would be valuable but is not yet safe to implement, leave a // TODO(remo): comment rather than a half-wired handler.

3. Build for the simulator

Build the SDK XCFramework first, then the example app via XcodeBuildMCP.

Use XcodeBuildMCP (not raw xcodebuild) to build and launch the example app. The xcworkspace is examples/ios/RemoExample.xcworkspace, scheme RemoExample. Boot a simulator, install, and launch before moving on.

4. Connect and verify registration

Read skills/remo/references/cli.md for exact flag syntax. At minimum:

.remo/bin/remo devices
.remo/bin/remo call -a "$ADDR" __ping '{}'
.remo/bin/remo list -a "$ADDR"

remo list must show every new capability you registered. If one is missing, the app did not rebuild or the #remoCap is outside #remoScope — fix before continuing.

5. Drive and capture

Run a checkpoint loop. For each state you want to verify:

1. Drive state with remo call -a "$ADDR" <capability> '<json>'.
2. Wait for animations to settle before capturing. The pager and scroll animations in the demo take ~300 ms; after a tab switch or scroll, allow roughly 3 s before a screenshot so the capture matches the settled state.
3. Capture via XcodeBuildMCP's simulator screenshot tool. Prefer it over remo screenshot when you want the lossless device-native PNG for a design-review diff. Use remo tree -a "$ADDR" -m 4 for structural checks.
4. Read hidden state with the read capabilities you registered (<feature>.visible, counts, selected tab) to assert non-visual behaviour.
5. Compare against the expectation. Record pass/fail.

Save artifacts under .remo/verifications/<task-id>/ (or, for a design review, review/<task-id>/ at repo root — the review/ layout seen in the current branch is the pattern).

6. Iterate

On failure, edit → re-run step 3's build → re-checkpoint. Do not overwrite a failed screenshot or report entry; append a new checkpoint so the retry log is reconstructable.

7. Write the report

Close with a short markdown summary containing:

• target app + scheme + simulator UDID + OS
• Figma node IDs (if design-driven)
• per-file change summary
• per-checkpoint table with pass/fail and the CLI call used to drive it
• known deviations from the design
• retry log (what failed, what you changed)

The review/new-collection-design.md on the current branch is a good reference shape.

Rules

• Capability code lives with the feature it describes, under #if DEBUG, inside #Remo { … }. No #if DEBUG inside the island.
• Capability names use <feature>.<group>.<action> and are centralized in a <Feature>CapabilityNames enum.
• Every handler returns a typed response with status on success and error on failure. Funnel through a single handle…Capability helper.
• UIKit work runs on MainActor — always through a bridge, never directly in the #remoCap callback.
• Load xcodebuildmcp-cli before using XcodeBuildMCP tools, and skills/remo/references/cli.md before using remo commands.
• On Tart / shared-folder worktrees, always set CARGO_TARGET_DIR=/tmp/remo-cargo-target for SDK builds.
• Allow ~3 s settle after a navigation/scroll capability before capturing.
• Don't overwrite failed checkpoint evidence — append.