gearsystem-debugging

name	gearsystem-debugging
description	Debug and trace Sega Master System, Game Gear, and SG-1000 games using the Gearsystem emulator MCP server. Provides workflows for Z80 CPU debugging, breakpoint management, VDP/PSG/YM2413 hardware inspection, disassembly analysis, execution tracing, and rewind/time-travel debugging. Use when the user wants to debug an SMS/GG/SG-1000 game, trace code execution, inspect Z80 CPU registers or hardware state, set breakpoints, analyze interrupts, step through Z80 instructions, reverse engineer game code, examine VDP registers, view sprites, inspect PSG or YM2413 FM audio, view the call stack, rewind to earlier execution points, or diagnose rendering, audio, or timing issues. Also use when the user mentions Master System development, Game Gear homebrew testing, or Z80 debugging with Gearsystem.
compatibility	Requires the Gearsystem MCP server. Before installing or configuring, call debug_get_status to check if the server is already connected. If it responds, the server is ready — skip setup entirely.
metadata	{"author":"drhelius","version":"1.0"}

Sega Master System / Game Gear / SG-1000 Debugging with Gearsystem

Overview

Debug Sega Master System, Game Gear, and SG-1000 games using the Gearsystem emulator as an MCP server. Control execution (pause, step, breakpoints), inspect the Z80 CPU and hardware (VDP, PSG, YM2413), read/write memory across multiple areas (ROM+RAM, VRAM, CRAM), disassemble code, trace instructions, rewind to earlier states, view sprites, and capture screenshots — all through MCP tool calls. Hardware documentation is available in the references/ directory and also at SMS Power! Development Documents.

MCP Server Prerequisite

IMPORTANT — Check before installing: Before attempting any installation or configuration, you MUST first verify if the Gearsystem MCP server is already connected in your current session. Call debug_get_status — if it returns a valid response, the server is active and ready.

Only if the tool is not available or the call fails, you need to help install and configure the Gearsystem MCP server:

Installing Gearsystem

Run the bundled install script (macOS/Linux):

bash scripts/install.sh

This installs Gearsystem via Homebrew on macOS or downloads the latest release on Linux. It prints the binary path on completion. You can also set INSTALL_DIR to control where the binary goes (default: ~/.local/bin).

Alternatively, download from GitHub Releases or install with brew install --cask drhelius/geardome/gearsystem on macOS.

Connecting as MCP Server

Configure your AI client to run Gearsystem as an MCP server via STDIO transport. Example for Claude Desktop (~/Library/Application Support/Claude/claude_desktop_config.json):

{
  "mcpServers": {
    "gearsystem": {
      "command": "/path/to/gearsystem",
      "args": ["--mcp-stdio"]
    }
  }
}

Replace /path/to/gearsystem with the actual binary path from the install script. Add --headless before --mcp-stdio on headless machines.

Hardware Documentation (References)

SMS/GG/SG-1000 hardware documentation is available in the references/ directory. Load them into your context when investigating specific hardware. Additional community documentation is available at SMS Power! Development Documents.

Reference	File	Quality	Load when...
SMS VDP (MacDonald)	references/msvdp.md	PRIMARY — hardware-tested, definitive	VDP registers, display modes, Mode 4, CRAM, sprites, scrolling, display timing, interrupts, GG/Genesis VDP
SMS/GG Hardware (MacDonald)	references/smstech.md	PRIMARY — hardware-tested, definitive	I/O ports, memory map, memory control, nationalization, interrupts (IM 0/1/2), BIOS, GG stereo, YM2413 detection
SMS Technical Info (Talbot-Watkins)	references/richard.md	HIGH — comprehensive, best YM2413 detail	YM2413 FM registers, SN76489 PSG, paging registers, line interrupt examples, VDP overview
TMS9918A VDP (Sean Young)	references/tms9918a.md	HIGH — detailed TMS9918 reference	SG-1000 video modes, TMS9918 legacy modes on SMS, Graphic I/II, Text, Multicolor, undocumented modes
SG-1000 Specs (Cornut)	references/sg1000.md	MEDIUM — concise SG-1000 quick ref	SG-1000 memory map, TMS9918 palette, basic VDP/PSG, SG-1000 specifics
SMS/GG Technical (Jon)	references/jon.md	MEDIUM — unique GG serial link info	Game Gear Gear-to-Gear cable protocol, GG Start button, GG serial communication

---

Debugging Workflow

1. Load and Orient

load_media → get_media_info → get_z80_status → get_screenshot

Start every session by loading the ROM, confirming it loaded correctly (file path, type, size, mapper, zone, system), then checking Z80 CPU state and taking a screenshot to understand the current game state. If a .sym file exists alongside the ROM, symbols are loaded automatically. Gearsystem supports sjasmplus/Pasmo (EQU), SDCC/NoICE (.noi), wla-dx, and vasm/generic symbol formats.

Load additional symbols with load_symbols or add individual labels with add_symbol.

2. Pause and Inspect

Always call debug_pause before inspecting state. While paused:

• CPU state: get_z80_status — registers AF, BC, DE, HL, AF', BC', DE', HL', IX, IY, SP, PC, WZ, I, R, flags (S, Z, H, P/V, N, C), interrupt state, halt status, interrupt mode (0/1/2)
• Disassembly: get_disassembly with a start/end address range
• Call stack: get_call_stack — current subroutine hierarchy
• Memory: read_memory with area name and address/length. Use list_memory_areas to see all available areas
• Sprites: list_sprites — all 64 sprites with position, size, pattern index

3. Set Breakpoints

Use breakpoints to stop execution at points of interest:

Breakpoint Type	Tool	Use Case
Execution	set_breakpoint (type: exec)	Stop when PC reaches address
Read	set_breakpoint (type: read)	Stop when memory address is read
Write	set_breakpoint (type: write)	Stop when memory address is written
Range	set_breakpoint_range	Cover an address range (exec/read/write)
IRQ	toggle_irq_breakpoints	Break on RESET, NMI, or INT interrupts

Breakpoints support 4 memory areas: rom_ram, vram, cram, vdp_reg. Use the appropriate area depending on what you're debugging.

Important: Read/write breakpoints stop with PC at the instruction after the memory access.

Manage breakpoints with list_breakpoints and remove_breakpoint.

4. Step Through Code

After hitting a breakpoint or pausing:

Action	Tool	Behavior
Step Into	debug_step_into	Execute one Z80 instruction, enter subroutines
Step Over	debug_step_over	Execute one instruction, skip CALL subroutines
Step Out	debug_step_out	Run until RET returns from current subroutine
Step Frame	debug_step_frame	Execute until next frame
Run To	debug_run_to_cursor	Continue until PC reaches target address
Continue	debug_continue	Resume normal execution

After each step, call get_z80_status and get_disassembly to see where you are.

5. Trace Execution

The trace logger records Z80 instructions interleaved with hardware events (VDP, PSG, YM2413, I/O, bank switching).

1. set_trace_log with enabled: true to start recording (optionally filter event types)
2. Let the game run or step through code
3. set_trace_log with enabled: false to stop (entries are preserved)
4. get_trace_log to read recorded entries

Tracing is essential for understanding timing-sensitive code, interrupt handlers, VDP timing, and hardware interaction sequences.

---

Rewind (Time Travel Debugging)

• get_rewind_status reports whether rewind is enabled, how many snapshots are available, total capacity, and how many seconds are currently buffered.
• rewind_seek jumps to a specific buffered snapshot. The emulator must be paused first.
• Use rewind when you need to compare two nearby execution points without managing manual save states.

Typical flow:

1. debug_pause
2. get_rewind_status
3. rewind_seek to an earlier snapshot
4. get_z80_status and get_disassembly to inspect the restored point
5. debug_continue or keep stepping from there

---

Hardware Inspection

VDP (Video Display Processor)

• get_vdp_registers — all 11 VDP registers (R0-R10) with hex values and descriptions
• get_vdp_status — status flags, counters, mode, SG-1000 mode, extended mode 224
• list_sprites — all 64 sprites with position, size, pattern index
• get_sprite_image — get a specific sprite as base64 PNG

PSG (SN76489 Sound)

• get_psg_status — all 4 channels (3 tone + 1 noise): volume, period, frequency, GG stereo panning

YM2413 FM Synthesis (Master System only)

• get_ym2413_status — 9 FM channels with instruments, key-on state, f-number, block, envelope, rhythm mode, user instrument definition

Screen Capture

• get_screenshot — current rendered frame as PNG

Use screenshots after stepping or continuing to see the visual impact of changes.

---

Memory Areas

Use list_memory_areas to discover all available areas. Breakpoints and memory operations support these key areas:

Area	Description
rom_ram	Full Z80 64K address space (ROM + RAM)
vram	Video RAM — tile patterns, nametable, sprite attribute table
cram	Color RAM — palette entries
vdp_reg	VDP register file

Additional areas for read_memory/write_memory include individual ROM banks, external RAM, BIOS, and more — use list_memory_areas for the complete list.

---

Common Debugging Scenarios

Finding an Interrupt Handler

1. toggle_irq_breakpoints to enable breaking on NMI (VBlank) or INT (scanline)
2. debug_continue to run until the interrupt fires
3. get_z80_status + get_disassembly to see the handler code
4. get_call_stack to see the call hierarchy
5. add_symbol to label the handler address and any subroutines it calls

Note: The Z80 NMI vector is fixed at $0066. The INT handler depends on interrupt mode (IM 0/1/2). In IM 1 (most common for SMS), INT jumps to $0038.

Diagnosing Graphics Corruption

1. debug_pause → get_vdp_registers — check mode, nametable, sprite table, and pattern addresses
2. get_vdp_status — verify status flags, line counter, interrupt state
3. read_memory (area: vram) — inspect tile patterns, nametable, and sprite attribute table
4. read_memory (area: cram) — check palette data
5. list_sprites — verify sprite positions, patterns, and ordering
6. Set read/write breakpoints (area: vram) on display data addresses to catch corruption source

Analyzing a Subroutine

1. set_breakpoint at the subroutine entry point
2. debug_continue → when hit, get_z80_status
3. Step through with debug_step_into / debug_step_over
4. After each step: check registers, read relevant memory
5. add_symbol for the routine and any called subroutines
6. add_disassembler_bookmark to mark interesting locations

Tracking a Variable

1. add_memory_watch on the variable's address — watches are visible in the emulator GUI
2. Set a write breakpoint with set_breakpoint (type: write) on that address
3. When hit, get_disassembly reveals what code is modifying it
4. get_call_stack shows the call chain leading to the write

Inspecting VDP Timing

1. toggle_irq_breakpoints to break on INT (scanline interrupt)
2. get_vdp_status to check the line counter and flags
3. get_trace_log to see interleaved Z80 + VDP events
4. Check VDP register writes in the trace for mid-frame register changes (raster effects)

Debugging Sound

1. get_psg_status — check all 4 PSG channels (tone frequencies, volumes, noise mode)
2. get_ym2413_status — check FM synthesis state (instruments, key-on, channels)
3. Set write breakpoints on PSG I/O port ($7E-$7F) or YM2413 ports ($F0-$F1) to catch sound writes
4. Step through the sound driver code and correlate register writes with audio output

---

Organizing Your Debug Session

• Symbols: Use add_symbol liberally to label addresses — makes disassembly readable
• Bookmarks: Use add_disassembler_bookmark for code locations and add_memory_bookmark for data regions
• Watches: Use add_memory_watch for variables you're tracking across steps
• Save states: Use save_state / load_state to snapshot and restore emulator state at interesting points
• Screenshots: Capture visual state with get_screenshot after significant changes
• Modify registers: Use write_z80_register to change register values live (AF, BC, DE, HL, IX, IY, SP, PC, etc.)