一键在 Manus 中运行任何 Skill

$pwd:

skillshare-codebase-audit

Name: Skillshare Codebase Audit
Author: runkids

// Cross-validate CLI flags, docs, tests, and targets for consistency across the codebase. Use this skill whenever the user asks to: audit the codebase, check for consistency issues, find undocumented flags, verify test coverage, validate targets.yaml, check handler split conventions, or verify oplog instrumentation. This is a read-only audit — it reports issues but never modifies files. Use after large refactors, before releases, or whenever you suspect docs/code/tests have drifted out of sync.

在 Manus 中运行

$ git log --oneline --stat

stars:2,072

forks:130

updated:2026年3月25日 13:20

SKILL.md

readonly

name	skillshare-codebase-audit
description	Cross-validate CLI flags, docs, tests, and targets for consistency across the codebase. Use this skill whenever the user asks to: audit the codebase, check for consistency issues, find undocumented flags, verify test coverage, validate targets.yaml, check handler split conventions, or verify oplog instrumentation. This is a read-only audit — it reports issues but never modifies files. Use after large refactors, before releases, or whenever you suspect docs/code/tests have drifted out of sync.
metadata	{"targets":["claude","universal"]}

Read-only consistency audit across the skillshare codebase. $ARGUMENTS specifies focus area (e.g., "flags", "tests", "targets") or omit for full audit.

Scope: This skill only READS and REPORTS. It does not modify any files. Use implement-feature to fix issues or update-docs to fix documentation gaps.

Audit Dimensions

Run all 4 dimensions in parallel where possible. For each, produce a summary table.

1. CLI Flag Audit

Compare every flag defined in cmd/skillshare/*.go against website/docs/commands/*.md.

# Find all flags in Go source
grep -rn 'flag\.\(String\|Bool\|Int\)' cmd/skillshare/
grep -rn 'Args\|Usage' cmd/skillshare/

Report:

UNDOCUMENTED: Flag exists in code but not in docs
STALE: Flag documented but not found in code
OK: Flag matches between code and docs

2. Spec vs Code

For each spec in specs/ marked as completed/done:

Verify the described feature exists in source code
Check that the spec's acceptance criteria are testable

Report:

IMPLEMENTED: Spec complete, code exists
MISMATCH: Spec says done but code missing or partial
PENDING: Spec not yet marked complete (informational)

3. Test Coverage

For each command handler in cmd/skillshare/<cmd>.go:

Check if tests/integration/<cmd>_test.go exists
Check if key behaviors have test cases

# List all command handlers
ls cmd/skillshare/*.go | grep -v '_test.go\|main.go\|helpers.go\|mode.go'

# List all integration tests
ls tests/integration/*_test.go

Report:

COVERED: Command has integration test file with test cases
PARTIAL: Test file exists but missing key scenarios
MISSING: No integration test for this command

4. Target Audit

Verify internal/config/targets.yaml entries:

Each target has both global_path and project_path
Aliases are consistent
No duplicate entries

Report:

OK: Target entry complete and valid
INCOMPLETE: Missing required fields
DUPLICATE: Name or alias collision

Output Format

== Skillshare Codebase Audit ==

### CLI Flags (N issues)
| Command   | Flag        | Status       |
|-----------|-------------|--------------|
| install   | --force     | OK           |
| install   | --into      | UNDOCUMENTED |

### Specs (N issues)
| Spec File            | Status      |
|----------------------|-------------|
| copy-sync-mode.md    | IMPLEMENTED |
| some-feature.md      | MISMATCH    |

### Test Coverage (N issues)
| Command   | Status  | Notes              |
|-----------|---------|--------------------|
| sync      | COVERED |                    |
| audit     | PARTIAL | missing edge cases |
| target    | MISSING |                    |

### Targets (N issues)
| Target    | Status     | Notes         |
|-----------|------------|---------------|
| claude    | OK         |               |
| newagent  | INCOMPLETE | no project_path |

== Summary: X OK / Y issues found ==

5. Handler Split Audit

For commands with >300 lines in cmd/skillshare/<cmd>.go, verify the handler split convention is followed:

# Find large command files
wc -l cmd/skillshare/*.go | sort -rn | head -20

Check that large commands are properly split:

Suffix	Expected for large commands
`_handlers.go`	Core logic extracted
`_render.go`	Output rendering separated
`_tui.go`	TUI components isolated

Report:

SPLIT: Large command properly follows handler split convention
MONOLITH: >300 lines without split (should be refactored)
N/A: Small command, no split needed

6. Oplog Coverage

Verify all mutating commands have oplog instrumentation:

# Find commands that modify state
grep -rn 'func handle\|func cmd' cmd/skillshare/*.go

# Check for oplog.Write calls
grep -rn 'oplog.Write' cmd/skillshare/

Mutating commands (install, uninstall, sync, update, init, collect, backup, restore, trash) should all write to oplog. Read-only commands (list, status, check, search, audit, log, version) should not.

Report:

INSTRUMENTED: Mutating command has oplog.Write
MISSING: Mutating command lacks oplog instrumentation
N/A: Read-only command (no oplog expected)

7. Web API Consistency

Verify internal/server/handler_*.go routes match CLI commands:

# List all handler files
ls internal/server/handler_*.go | grep -v _test.go

# Check route registration in server.go
grep -n 'HandleFunc\|Handle(' internal/server/server.go

Report:

SYNCED: CLI command has corresponding API handler
CLI-ONLY: Command exists in CLI but not in Web API (may be intentional)
API-ONLY: API handler without CLI counterpart (unusual)

Output Format

== Skillshare Codebase Audit ==

### CLI Flags (N issues)
| Command   | Flag        | Status       |
|-----------|-------------|--------------|
| install   | --force     | OK           |
| install   | --into      | UNDOCUMENTED |

### Specs (N issues)
| Spec File            | Status      |
|----------------------|-------------|
| copy-sync-mode.md    | IMPLEMENTED |
| some-feature.md      | MISMATCH    |

### Test Coverage (N issues)
| Command   | Status  | Notes              |
|-----------|---------|--------------------|
| sync      | COVERED |                    |
| audit     | PARTIAL | missing edge cases |
| target    | MISSING |                    |

### Targets (N issues)
| Target    | Status     | Notes         |
|-----------|------------|---------------|
| claude    | OK         |               |
| newagent  | INCOMPLETE | no project_path |

### Handler Split (N issues)
| Command   | Lines | Status    | Notes              |
|-----------|-------|-----------|--------------------|
| install   | 450   | SPLIT     | 6 sub-files        |
| audit     | 320   | MONOLITH  | should split render |
| status    | 80    | N/A       |                    |

### Oplog (N issues)
| Command   | Mutating? | Status        |
|-----------|-----------|---------------|
| install   | Yes       | INSTRUMENTED  |
| trash     | Yes       | MISSING       |
| list      | No        | N/A           |

### Web API (N issues)
| Command   | CLI | API | Status   |
|-----------|-----|-----|----------|
| install   | Yes | Yes | SYNCED   |
| diff      | Yes | No  | CLI-ONLY |

== Summary: X OK / Y issues found ==

Rules

Read-only — never modify files, only report
Evidence-based — every finding must include file path and line number
No false positives — verify with grep before flagging
Scope $ARGUMENTS — if user specifies "flags", only run dimension 1; "handlers" for dimension 5, "oplog" for dimension 6, "api" for dimension 7

related-skills.json

同仓库

skillshare.md

from "runkids/skillshare"

Manages and syncs AI CLI skills and agents across 50+ tools from a single source. Use this skill whenever the user mentions "skillshare", runs skillshare commands, manages skills or agents (install, update, uninstall, sync, commit, audit, analyze, check, diff, search), or troubleshoots skill/agent configuration (orphaned symlinks, broken targets, sync issues). Covers both global (~/.config/skillshare/) and project (.skillshare/) modes. Also use when: adding new AI tool targets (Claude, Cursor, Windsurf, etc.), setting target include/exclude filters or copy vs symlink mode, using backup/restore or trash recovery, piping skillshare output to scripts (--json), setting up CI/CD audit pipelines, building/sharing skill hubs (hub index, hub add), or working with agents (single .md files synced to agent-capable targets like Claude, Cursor, Augment, OpenCode) via positional `agents` filter or `--kind agent`, plus `.agentignore` and `enable`/`disable` for per-agent toggles.

2026-05-302.1k

skillshare-changelog.md

from "runkids/skillshare"

Generate CHANGELOG.md entry from recent commits in conventional format. Also syncs the website changelog page. Use this skill whenever the user asks to: generate a changelog, document what changed between tags, or create a new CHANGELOG entry. If you see requests like "write the changelog for v0.17", "what changed since last release", this is the skill to use. Do NOT manually edit CHANGELOG.md without this skill — it ensures proper formatting, user-perspective writing, and website changelog sync. For full release workflows (tests, changelog, release notes, version bump, announcements), use /release instead.

2026-04-052.1k

skillshare-release.md

from "runkids/skillshare"

End-to-end release workflow for skillshare. Runs tests, generates changelog (via /changelog), writes RELEASE_NOTES, updates version numbers, commits, and drafts announcements. Use when the user says "release", "prepare release", "cut a release", "release v0.19", or any request to publish a new version. For changelog-only tasks, use /changelog instead.

2026-04-052.1k

skillshare-cli-e2e-test.md

from "runkids/skillshare"

Run isolated E2E tests in devcontainer from ai_docs/tests runbooks. Use this skill whenever the user asks to: run an E2E test, execute a test runbook, validate a feature end-to-end, create a new runbook, or test CLI behavior in isolation. If you need to run a multi-step CLI validation sequence (init → install → sync → verify), this is the skill — it handles ssenv isolation, flag verification, and structured reporting. Prefer this over ad-hoc docker exec sequences for any test that follows a runbook or needs reproducible isolation.

2026-03-252.1k

skillshare-devcontainer.md

from "runkids/skillshare"

Run CLI commands, tests, and debugging inside the skillshare devcontainer. Use this skill whenever you need to: execute skillshare CLI commands for verification, run Go tests (unit or integration), reproduce bugs, test new features, start the web UI, or perform any operation that requires a Linux environment. All CLI execution MUST happen inside the devcontainer — never run skillshare commands on the host. If you are about to use Bash to run `ss`, `skillshare`, `go test`, or `make test`, stop and use this skill first to ensure correct container execution.

2026-03-252.1k

skillshare-implement-feature.md

from "runkids/skillshare"

Implement a feature from a spec file or description using TDD workflow. Use this skill whenever the user asks to: add a new CLI command, implement a feature from a spec, build new functionality, add a flag, create a new internal package, or write Go code for skillshare. This skill enforces test-first development, proper handler split conventions, oplog instrumentation, and dual-mode (global/project) patterns. If the request involves writing Go code and tests, use this skill — even if the user doesn't explicitly say "implement".

2026-03-252.1k

package.json

"author": "runkids"

"repository": "runkids/skillshare"

打开 GitHub 仓库查看创作者相关仓库

$ install --global

$ download --local

在 Manus 中运行

$ useful --forSOC

软件质量保证分析师与测试员计算机与数学类职业15-1253L4

name	skillshare-codebase-audit
description	Cross-validate CLI flags, docs, tests, and targets for consistency across the codebase. Use this skill whenever the user asks to: audit the codebase, check for consistency issues, find undocumented flags, verify test coverage, validate targets.yaml, check handler split conventions, or verify oplog instrumentation. This is a read-only audit — it reports issues but never modifies files. Use after large refactors, before releases, or whenever you suspect docs/code/tests have drifted out of sync.
metadata	{"targets":["claude","universal"]}

Read-only consistency audit across the skillshare codebase. $ARGUMENTS specifies focus area (e.g., "flags", "tests", "targets") or omit for full audit.

Scope: This skill only READS and REPORTS. It does not modify any files. Use implement-feature to fix issues or update-docs to fix documentation gaps.

Audit Dimensions

Run all 4 dimensions in parallel where possible. For each, produce a summary table.

1. CLI Flag Audit

Compare every flag defined in cmd/skillshare/*.go against website/docs/commands/*.md.

# Find all flags in Go source
grep -rn 'flag\.\(String\|Bool\|Int\)' cmd/skillshare/
grep -rn 'Args\|Usage' cmd/skillshare/

Report:

UNDOCUMENTED: Flag exists in code but not in docs
STALE: Flag documented but not found in code
OK: Flag matches between code and docs

2. Spec vs Code

For each spec in specs/ marked as completed/done:

Verify the described feature exists in source code
Check that the spec's acceptance criteria are testable

Report:

IMPLEMENTED: Spec complete, code exists
MISMATCH: Spec says done but code missing or partial
PENDING: Spec not yet marked complete (informational)

3. Test Coverage

For each command handler in cmd/skillshare/<cmd>.go:

Check if tests/integration/<cmd>_test.go exists
Check if key behaviors have test cases

# List all command handlers
ls cmd/skillshare/*.go | grep -v '_test.go\|main.go\|helpers.go\|mode.go'

# List all integration tests
ls tests/integration/*_test.go

Report:

COVERED: Command has integration test file with test cases
PARTIAL: Test file exists but missing key scenarios
MISSING: No integration test for this command

4. Target Audit

Verify internal/config/targets.yaml entries:

Each target has both global_path and project_path
Aliases are consistent
No duplicate entries

Report:

OK: Target entry complete and valid
INCOMPLETE: Missing required fields
DUPLICATE: Name or alias collision

Output Format

== Skillshare Codebase Audit ==

### CLI Flags (N issues)
| Command   | Flag        | Status       |
|-----------|-------------|--------------|
| install   | --force     | OK           |
| install   | --into      | UNDOCUMENTED |

### Specs (N issues)
| Spec File            | Status      |
|----------------------|-------------|
| copy-sync-mode.md    | IMPLEMENTED |
| some-feature.md      | MISMATCH    |

### Test Coverage (N issues)
| Command   | Status  | Notes              |
|-----------|---------|--------------------|
| sync      | COVERED |                    |
| audit     | PARTIAL | missing edge cases |
| target    | MISSING |                    |

### Targets (N issues)
| Target    | Status     | Notes         |
|-----------|------------|---------------|
| claude    | OK         |               |
| newagent  | INCOMPLETE | no project_path |

== Summary: X OK / Y issues found ==

5. Handler Split Audit

For commands with >300 lines in cmd/skillshare/<cmd>.go, verify the handler split convention is followed:

# Find large command files
wc -l cmd/skillshare/*.go | sort -rn | head -20

Check that large commands are properly split:

Suffix	Expected for large commands
`_handlers.go`	Core logic extracted
`_render.go`	Output rendering separated
`_tui.go`	TUI components isolated

Report:

SPLIT: Large command properly follows handler split convention
MONOLITH: >300 lines without split (should be refactored)
N/A: Small command, no split needed

6. Oplog Coverage

Verify all mutating commands have oplog instrumentation:

# Find commands that modify state
grep -rn 'func handle\|func cmd' cmd/skillshare/*.go

# Check for oplog.Write calls
grep -rn 'oplog.Write' cmd/skillshare/

Report:

INSTRUMENTED: Mutating command has oplog.Write
MISSING: Mutating command lacks oplog instrumentation
N/A: Read-only command (no oplog expected)

7. Web API Consistency

Verify internal/server/handler_*.go routes match CLI commands:

# List all handler files
ls internal/server/handler_*.go | grep -v _test.go

# Check route registration in server.go
grep -n 'HandleFunc\|Handle(' internal/server/server.go

Report:

SYNCED: CLI command has corresponding API handler
CLI-ONLY: Command exists in CLI but not in Web API (may be intentional)
API-ONLY: API handler without CLI counterpart (unusual)

Output Format

== Skillshare Codebase Audit ==

### CLI Flags (N issues)
| Command   | Flag        | Status       |
|-----------|-------------|--------------|
| install   | --force     | OK           |
| install   | --into      | UNDOCUMENTED |

### Specs (N issues)
| Spec File            | Status      |
|----------------------|-------------|
| copy-sync-mode.md    | IMPLEMENTED |
| some-feature.md      | MISMATCH    |

### Test Coverage (N issues)
| Command   | Status  | Notes              |
|-----------|---------|--------------------|
| sync      | COVERED |                    |
| audit     | PARTIAL | missing edge cases |
| target    | MISSING |                    |

### Targets (N issues)
| Target    | Status     | Notes         |
|-----------|------------|---------------|
| claude    | OK         |               |
| newagent  | INCOMPLETE | no project_path |

### Handler Split (N issues)
| Command   | Lines | Status    | Notes              |
|-----------|-------|-----------|--------------------|
| install   | 450   | SPLIT     | 6 sub-files        |
| audit     | 320   | MONOLITH  | should split render |
| status    | 80    | N/A       |                    |

### Oplog (N issues)
| Command   | Mutating? | Status        |
|-----------|-----------|---------------|
| install   | Yes       | INSTRUMENTED  |
| trash     | Yes       | MISSING       |
| list      | No        | N/A           |

### Web API (N issues)
| Command   | CLI | API | Status   |
|-----------|-----|-----|----------|
| install   | Yes | Yes | SYNCED   |
| diff      | Yes | No  | CLI-ONLY |

== Summary: X OK / Y issues found ==

Rules

Read-only — never modify files, only report
Evidence-based — every finding must include file path and line number
No false positives — verify with grep before flagging
Scope $ARGUMENTS — if user specifies "flags", only run dimension 1; "handlers" for dimension 5, "oplog" for dimension 6, "api" for dimension 7

skillshare-codebase-audit

Audit Dimensions

1. CLI Flag Audit

2. Spec vs Code

3. Test Coverage

4. Target Audit

Output Format

5. Handler Split Audit

6. Oplog Coverage

7. Web API Consistency

Output Format

Rules

同仓库更多 Skills

同仓库更多 Skills

Audit Dimensions

1. CLI Flag Audit

2. Spec vs Code

3. Test Coverage

4. Target Audit

Output Format

5. Handler Split Audit

6. Oplog Coverage

7. Web API Consistency

Output Format

Rules