القائمة
Take a single measurement and analyze the frequency response. Compares to target curve if specified.
التثبيت باستخدام Codex أو Claude انسخ هذا Prompt والصقه في Codex أو Claude أو مساعد آخر ليراجع صفحة Skill ويثبّتها لك.
استنادا إلى تصنيف SOC المهني
Run a calibration recipe end-to-end. Lists available recipes, recommends one based on hardware, then reads and executes each step via MCP tools. Saves equipment state and run history for later review.
Interactive recipe builder. Guides the user through creating a calibration recipe, validates it against the template, and saves to recipes/custom/.
Current system state review. Shows EQ state, last measurement, distance from target, and calibration history.
Pre-flight system check. Verifies all hardware is connected and reachable.
Interactive equipment configuration. Asks about hardware (AVR, DSP, subs, mic), generates config.yaml, configures MCP server connection, and verifies connectivity.
| name | avr:measure |
| version | 1.0.0 |
| description | Take a single measurement and analyze the frequency response. Compares to target curve if specified. |
| allowed-tools | ["Bash","Read","Write","Edit","Glob","Grep","Agent","AskUserQuestion"] |
Take a single frequency response measurement and analyze the result.
$ARGUMENTS — optional: target curve name (e.g. "harman") to compare against.check_system to verify hardware is ready.measure MCP tool to trigger a sweep.get_measurement_history with limit=1 to retrieve the result.Report the frequency response analysis:
If a target curve was specified:
If there are previous measurements:
Present results clearly: