got-plt-exploitation

name

got-plt-exploitation

description

How to exploit GOT/PLT vulnerabilities in binary exploitation challenges. Use this skill whenever the user mentions GOT overwrites, PLT hijacking, arbitrary write to GOT, libc GOT exploitation, free2system, strlen2system, or any binary exploitation task involving dynamic linking vulnerabilities. Make sure to use this skill for CTF pwn challenges, binary analysis, or when working with dynamically linked binaries that have partial RELRO.

GOT/PLT Exploitation Guide

This skill helps you exploit Global Offset Table (GOT) and Procedure Linkage Table (PLT) vulnerabilities in dynamically linked binaries to achieve arbitrary code execution.

Understanding GOT and PLT

GOT (Global Offset Table)

• Stores addresses of external functions resolved at runtime
• Each entry corresponds to a symbol from external libraries
• First call: dynamic linker resolves address and stores in GOT
• Subsequent calls: use cached GOT address (no re-resolution)

PLT (Procedure Linkage Table)

• Trampoline entries for external function calls
• First call: invokes dynamic linker to resolve address
• After resolution: GOT entry is updated, future calls use GOT directly

Key insight: GOT entries are writable (with partial RELRO), making them targets for exploitation.

Exploitation Workflow

Step 1: Check Binary Protections

First, determine if GOT exploitation is possible:

# Check RELRO status
readelf -l ./binary | grep -i relro
# or
checksec --file=./binary

• Full RELRO: GOT is read-only → GOT overwrite NOT possible
• Partial RELRO: GOT is writable → GOT overwrite IS possible
• No RELRO: GOT is writable → GOT overwrite IS possible

Step 2: Locate GOT Entries

# Get GOT section address
objdump -s -j .got ./binary

# In GEF/pwndbg, examine GOT
gef➤ x/20x 0xADDR_GOT

# Or use GEF's built-in command
gef➤ got

Step 3: Identify PLT Entries

# List PLT entries
objdump -j .plt -d ./binary

# Find specific function PLT address
objdump -j .plt -d ./binary | grep system

Step 4: Choose Target Function

Select a function to overwrite in GOT:

Ideal candidates:

• Functions called with user-controlled parameters
• Functions that will be called after your overwrite
• Common targets: free, strlen, printf, puts, gets

If system is in PLT:

• Overwrite target GOT entry with system PLT address
• Control the parameter to pass /bin/sh

If system is NOT in PLT:

• First leak system address from libc
• Overwrite GOT entry with leaked system address

Common Exploitation Techniques

Technique 1: Free2System

When to use: Heap vulnerabilities where you can control chunk content and overwrite GOT.

Steps:

1. Overwrite free GOT entry with system address
2. Write /bin/sh\x00 into a heap chunk
3. Trigger free() on that chunk
4. Result: system("/bin/sh") executes

Example:

# Overwrite free GOT with system
payload = p64(system_addr)
# Write /bin/sh in chunk
payload += b'/bin/sh\x00'
# Trigger free on that chunk

Technique 2: Strlen2System

When to use: Binary calls strlen or puts with user input.

Steps:

1. Overwrite strlen GOT entry with system address
2. Send /bin/sh as input
3. When strlen is called, it executes system("/bin/sh")

Why it works: puts internally calls strlen with the same argument.

Technique 3: Heap-Based GOT Overwrite

When to use: Fastbin heap vulnerabilities.

Steps:

1. Use fastbin to allocate chunk overlapping GOT
2. Overwrite function pointer (usually free) in GOT
3. Point it to system
4. Free a chunk containing /bin/sh

Practical Commands Reference

Binary Analysis

# Check protections
checksec --file=./binary

# View GOT section
objdump -s -j .got ./binary

# View PLT section
objdump -j .plt -d ./binary

# Find symbol addresses
nm ./binary | grep system
readelf -s ./binary | grep system

Debugging with GEF

# Start debugging
gdb ./binary

# View GOT table
gef➤ got

# Examine GOT at address
gef➤ x/20x 0xADDR

# Set breakpoint on function
gef➤ break function_name

# Continue execution
gef➤ continue

Finding One Gadget

# Find one-gadget RCE payloads
one_gadget /lib/x86_64-linux-gnu/libc.so.6

# Filter for specific constraints
one_gadget /lib/x86_64-linux-gnu/libc.so.6 --no-fd

Exploitation Checklist

Before attempting GOT exploitation, verify:

• Binary has partial or no RELRO (not full RELRO)
• GOT is writable (confirmed via checksec/readelf)
• Target function exists in GOT
• You can control parameters passed to target function
• You have a way to trigger the function call after overwrite
• If using system, either it's in PLT or you can leak libc address

Common Pitfalls

1. Full RELRO: GOT is read-only, cannot overwrite
2. ASLR: Need to leak addresses first if ASLR is enabled
3. Wrong GOT entry: Ensure you're overwriting the correct function
4. Timing: Overwrite must happen before the function is called
5. Parameter control: Target function must accept controllable input

Next Steps

After GOT exploitation:

1. If successful: You have RCE, spawn shell
2. If failed: Check if Full RELRO is enabled, try alternative techniques
3. For libc GOT: Consider targeting internal libc functions
4. For heap vulnerabilities: Combine with fastbin attacks

References

• GOT Overwrite Exploitation
• One Gadgets and Malloc Hook
• CTF Wiki - Heap Exploitation
• Code Execution on Last libc