القائمة
Architectural material properties, durability, sustainability, specification, detailing, life-cycle assessment, and material palettes for building design
التثبيت باستخدام Codex أو Claude انسخ هذا Prompt والصقه في Codex أو Claude أو مساعد آخر ليراجع صفحة Skill ويثبّتها لك.
استنادا إلى تصنيف SOC المهني
Auto-activated foundation layer for the Architect Skills plugin providing practitioner-grade reference across 50+ architects and theorists (Vitruvius through Kere), 100+ quantitative rules of thumb sourced from IBC, ASHRAE 90.1, ADA/ABA, NFPA 101, BS EN 1991-1995, Neufert Architects' Data, and Architectural Graphic Standards. Covers all major building typologies (residential, commercial, institutional, industrial, special), design quality frameworks (RIBA Plan of Work 2020, AIA Framework for Design Excellence, CABE Building for Life 12), sustainability rating systems (LEED BD+C v4.1, BREEAM New Construction 2024, Passive House Classic/Plus/Premium, WELL v2, Living Building Challenge 4.0, Fitwel), fire and life safety codes (NFPA 101, IBC Ch. 7-10, BS 9999, Approved Document B), accessibility standards (ADA 2010, BS 8300, EN 17210, DDA), acoustic performance (ASTM E90 STC, ASTM E492 IIC, BB93, DIN 4109), structural systems, envelope performance, daylighting metrics, and an anti-pattern catalog of common design
Australia architectural code and regulatory reference. Covers the National Construction Code 2022 (NCC 2022, published by Australian Building Codes Board ABCB) -- Volume One (Class 2-9 Building Code of Australia), Volume Two (Class 1 + 10 -- Housing Provisions), Volume Three (Plumbing Code of Australia); Australian Standards including AS/NZS 1170.0-2002 + 1170.1-2002 + 1170.2-2021 wind + 1170.3-2003 snow + 1170.4-2007 seismic, AS 3600-2018 concrete, AS 4100-2020 steel, AS 1684-2010 residential timber, AS 1170.4 seismic, AS 1530.1/.2/.3/.4/.8 fire test methods, AS 4072 service penetration sealing, AS 1428.1-2021 accessibility, AS 1428.4 tactile, AS/NZS 4586 slip resistance, AS 1668 ventilation, AS 1680 lighting; the Disability (Access to Premises -- Buildings) Standards 2010 + Disability Discrimination Act 1992; the 7-star NatHERS (Nationwide House Energy Rating Scheme) mandatory for new Class 1 housing from 2022; state-specific overlays (NSW Planning + Environmental Planning Instruments, Victoria Plumbing Reg
People's Republic of China architectural code and regulatory reference. Covers the GB (Guojia Biaozhun -- National Standard) series of mandatory codes including GB 50352-2019 Civil Buildings Unified Design Standard (replaces 2005), GB 50016-2014 (2018 ed.) Fire Protection Design of Buildings, GB 51251-2017 Smoke Control + Prevention, GB 50045 (legacy high-rise fire), GB 50011-2010 Seismic Design (with 2016 amendments), GB 50009-2012 Building Structural Loads, GB 55015-2021 General Code for Building Energy + Renewable Energy, GB 50189-2015 Public Building Energy Design, JGJ 26-2018 + JGJ 75-2012 + JGJ 134-2010 Residential Energy Design (by climate zone), GB 50763-2012 Code for Design Accessibility, GB 50352 civil building, plus the supplementary JGJ (Industry Standard) codes. Includes the five thermal climate zones per GB 50176-2016 (Severe Cold, Cold, Hot Summer Cold Winter, Hot Summer Warm Winter, Temperate), the eight seismic intensity zones (degree 6-9), the sunlight rights (Rizhao) regulation governing re
Germany architectural code and regulatory reference. Covers the Musterbauordnung (MBO 2002, last amended 2019) federal model plus the 16 binding Landesbauordnungen (LBO) for each Bundesland (BayBO Bavaria, BauO NRW North Rhine-Westphalia, BauO Bln Berlin, HBauO Hamburg, BauO Bbg Brandenburg, NBauO Lower Saxony, HBO Hesse, BauO LSA Saxony-Anhalt, SaechsBO Saxony, ThuerBO Thuringia, LBauO Rheinland-Pfalz, LBO BW Baden-Wuerttemberg, BauO SH Schleswig-Holstein, BauO M-V Mecklenburg-Vorpommern, LBO Saarland, BauO Bremen), the federal Gebaeudeenergiegesetz GEG 2023, the German Eurocode national annexes (DIN EN 1990-1999/NA), the DIN 18040 series for accessibility (Part 1 public buildings, Part 2 dwellings, Part 3 public space), DIN 4109 for sound insulation, DIN 4108 thermal insulation, DIN 4102/EN 13501 for fire classification, Musterhochhausrichtlinie + Sonderbauordnungen for special buildings, Versammlungsstaettenverordnung for assembly buildings, Industriebaurichtlinie for industrial, KrPflVO/HHRRL for hospital
India-specific architectural code and regulatory reference. Covers the National Building Code of India (NBC 2016), Energy Conservation Building Code (ECBC 2017) and ECBC for Residential Buildings (ECBC-R 2018, also called Eco-Niwas Samhita), Indian Standards for structural design (IS 456:2000 concrete, IS 800:2007 steel, IS 875 Parts 1-5 loads, IS 1893:2016 seismic, IS 13920:2016 ductile detailing, IS 1904 foundations), the Rights of Persons with Disabilities Act 2016 and Harmonised Guidelines & Space Standards for Universal Accessibility 2021 (MoHUA), state-level Development Control Regulations (Mumbai DCPR 2034, Delhi MPD 2041, Bangalore BBMP, Chennai CMDA, Hyderabad GHMC, Kolkata KMC, Pune PMC, Ahmedabad AUDA), municipal building bye-laws, GRIHA and IGBC green rating systems, RERA (Real Estate Regulatory Authority) under the RERA Act 2016, fire safety per NBC Part 4 and state fire services rules, and the approval workflow involving Municipal Corporations, Development Authorities, State Fire Services NOC, a
Japan architectural code and regulatory reference. Covers the Building Standards Act (Kenchiku Kijun Ho, 1950, fundamentally revised 1998 toward performance-based regulation and 2007 strengthening post-Aneha incident), Building Standards Law Enforcement Order (Kenchiku Kijun Ho Shiko Rei) and MLIT Notifications (Kokuji); the parallel Fire Service Act and Fire Service Law Enforcement Order administered by Fire Department (Shobosho); Energy Conservation Act 1979 superseded by Act on the Improvement of Energy Consumption Performance of Buildings (Kenchikubutsu Sho-Energy Ho) 2015 + amendment 2022; Heart Building Law 2006 (Barrier-Free Law) and JIS S 0026 accessibility standards; City Planning Act with 12 use districts and ratio-based regulation (Yoseki-ritsu volumetric, Kenpei-ritsu coverage, daylighting + setback ratios); the unique two-level seismic design philosophy (Level 1 475-year + Level 2 2475-year), 1981 New Seismic Standard (Shintaishin), Energy Absorption Member design + base isolation + damper system
| name | material-selection |
| description | Architectural material properties, durability, sustainability, specification, detailing, life-cycle assessment, and material palettes for building design |
| user-invocable | true |
Comprehensive knowledge base for architectural material selection covering structural performance, durability, thermal and acoustic properties, fire resistance, embodied carbon, cost, and aesthetic quality. Invoke this skill when addressing questions about material specification, material comparison, life-cycle assessment, embodied carbon targets, material detailing, finish selection, or material-appropriate design strategies.
Every architectural material decision should be evaluated against eight performance criteria. Weight each criterion according to project priorities (structural warehouse vs. cultural institution vs. social housing).
Criterion 1: Structural Performance
Criterion 2: Durability and Weathering
Criterion 3: Thermal Properties
Criterion 4: Acoustic Properties
Criterion 5: Fire Performance
Criterion 6: Embodied Carbon and Sustainability
Criterion 7: Cost
Criterion 8: Aesthetic Quality
Scoring: 1 (poor) to 5 (excellent) per criterion. Apply weighting multipliers (1.0-3.0) based on project priorities.
| Criterion | Weight | Option A (Score) | A Weighted | Option B (Score) | B Weighted | Option C (Score) | C Weighted |
|---|---|---|---|---|---|---|---|
| Structural | 1.5 | ||||||
| Durability | 2.0 | ||||||
| Thermal | 1.5 | ||||||
| Acoustic | 1.0 | ||||||
| Fire | 2.0 | ||||||
| Embodied Carbon | 2.5 | ||||||
| Cost | 2.0 | ||||||
| Aesthetic | 1.5 | ||||||
| TOTAL | 14.0 | Σ | Σ | Σ |
Interpretation: Highest weighted total = preferred option. Sensitivity analysis: vary weights ±0.5 to test robustness. If options score within 5%, treat as equivalent and decide on qualitative factors.
In-Situ (Cast-in-Place):
Precast:
Glass-Fibre Reinforced Concrete (GRC/GFRC):
Ultra-High Performance Concrete (UHPC):
Self-Compacting Concrete (SCC):
| Finish | Method | Texture | Typical Cost Premium |
|---|---|---|---|
| Board-marked | Sawn timber formwork; grain transfers | Rough, directional | +10-20% |
| Steel-formed | Steel or resin-coated plywood formwork | Smooth, uniform | Baseline |
| Polished | Diamond grinding after curing | Mirror-like, exposes aggregate | +30-50% |
| Acid-etched | Acid wash removes surface cement paste | Exposed fine aggregate | +15-25% |
| Sandblasted | Abrasive blasting | Exposed coarse aggregate | +20-30% |
| Bush-hammered | Mechanical hammering | Rough, stone-like | +25-40% |
| Pigmented | Integral oxide pigments | Colored throughout | +15-30% |
| White concrete | White Portland cement + white aggregate | Bright white | +40-60% |
| Fabric-formed | Flexible textile formwork | Organic, draped | +20-50% |
| Grade (EN) | Yield Strength (MPa) | Tensile Strength (MPa) | Primary Use |
|---|---|---|---|
| S235 | 235 | 360-510 | Light structures, secondary steelwork |
| S275 | 275 | 410-560 | General building frames |
| S355 | 355 | 470-630 | Most common structural grade; beams, columns |
| S460 | 460 | 540-720 | High-rise, long-span, heavily loaded |
ASTM Equivalents: A36 (≈S235), A992 (≈S345-S355), A572 Gr 50 (≈S345)
| Method | Achievable Rating | Thickness | Cost ($/m² protected) |
|---|---|---|---|
| Intumescent paint | REI 30-120 | 0.5-5.0 mm DFT | $30-120 |
| Sprayed mineral fibre | REI 60-240 | 15-50 mm | $15-40 |
| Board encasement (calcium silicate) | REI 60-240 | 15-50 mm | $40-80 |
| Concrete encasement | REI 120-240 | 25-50 mm | $25-50 |
| Water-filled hollow sections | REI 120+ | N/A (hollow section) | $50-100 (system) |
| Species | Density (kg/m³) | Strength Class | Durability (EN 350) | Primary Use |
|---|---|---|---|---|
| European Spruce (Picea abies) | 380-450 | C16-C24 | 4 (poor) | Structural framing, CLT |
| Scots Pine (Pinus sylvestris) | 440-530 | C18-C27 | 3-4 | Joinery, structural |
| Douglas Fir (Pseudotsuga menziesii) | 480-560 | C24-C30 | 3 (moderate) | Heavy structural, glulam |
| Western Red Cedar (Thuja plicata) | 330-380 | C14-C16 | 2 (durable) | External cladding, shingles |
| Larch (Larix decidua) | 470-560 | C24-C27 | 3 (moderate) | External cladding, decking |
| Sitka Spruce (Picea sitchensis) | 380-440 | C16-C20 | 4 (poor) | Structural framing |
| Species | Density (kg/m³) | Durability (EN 350) | Hardness (Janka, N) | Primary Use |
|---|---|---|---|---|
| European Oak (Quercus robur) | 600-720 | 2 (durable) | 5,600 | Structural, flooring, joinery |
| Iroko (Milicia excelsa) | 550-680 | 1-2 (very durable) | 5,100 | External joinery, cladding |
| Teak (Tectona grandis) | 580-680 | 1 (very durable) | 4,700 | Marine, premium external |
| Accoya (modified Radiata Pine) | 510 | 1 (very durable) | 4,000 | External, ground contact |
| American White Ash (Fraxinus americana) | 600-680 | 4 (poor) | 5,900 | Internal flooring, furniture |
| American Black Walnut | 560-640 | 3 (moderate) | 4,500 | Premium joinery, paneling |
| European Beech | 660-740 | 5 (non-durable) | 6,400 | Internal flooring, furniture |
Glulam (Glued Laminated Timber):
Cross-Laminated Timber (CLT):
Laminated Veneer Lumber (LVL):
Plywood:
EN 350 Durability Classes:
Preservation Methods:
Types:
Standard Sizes:
Bond Patterns:
| Stone Type | Density (kg/m³) | Compressive (MPa) | Porosity | Durability | Embodied Carbon (kgCO2e/kg) |
|---|---|---|---|---|---|
| Limestone (Portland) | 2,000-2,500 | 20-60 | 5-20% | Moderate-Good | 0.09 |
| Sandstone (Yorkstone) | 2,000-2,400 | 20-70 | 5-25% | Variable | 0.06 |
| Granite | 2,600-2,800 | 100-250 | 0.5-2% | Excellent | 0.70 |
| Marble (Carrara) | 2,600-2,800 | 50-150 | 0.5-3% | Good (interior) | 0.12 |
| Slate | 2,600-2,800 | 100-200 | 0.1-1% | Excellent | 0.03-0.05 |
| Basalt | 2,800-3,000 | 150-300 | 0.5-2% | Excellent | 0.60 |
| Travertine | 2,200-2,500 | 30-80 | 5-15% | Moderate | 0.12 |
Mortar Designations (BS EN 998-2):
Joint Profiles:
Embodied Carbon:
Float Glass: Basic annealed glass. Breaks into large sharp shards. Not safety glass. VLT 87% (clear 6 mm).
Toughened (Tempered): Heat-treated to 4-5× strength of annealed. Breaks into small granules. Safety glass for doors, balustrades, overhead. Cannot be cut after toughening.
Laminated: Two or more glass plies bonded with PVB or SentryGlas interlayer. Holds together when broken. Safety glass; security; acoustic; UV filtering. Structural glazing interlayer (SentryGlas) enables longer spans.
Insulating Glass Unit (IGU): Two or three panes separated by spacer bars and sealed cavity (air, argon, krypton). U-values: double air 2.8, double argon 1.1-1.3, triple argon 0.5-0.7 W/m²K.
Tinted Glass: Body-colored (grey, bronze, green, blue). Reduces VLT and SHGC. Absorbs solar energy (heats up).
Low-E Coated: Metallic oxide coating reflects long-wave infrared radiation. Soft coat (sputtered, pyrolytic) on surface 2 or 3 of IGU. Reduces U-value by 30-50%.
Solar Control: Selective coating that admits visible light while rejecting solar infrared. VLT:SHGC ratio (selectivity) ≥ 1.5 is good; ≥ 2.0 is excellent.
Fire-Rated: Wired glass (30 min integrity, no insulation); intumescent gel-filled (30-120 min integrity + insulation); borosilicate (integrity only).
Patterned/Textured: Rolled pattern on one surface. Obscured vision with light transmission. Reeded, fluted, hammered, stippled.
Printed/Fritted: Ceramic frit screen-printed and fused to glass surface. Solar shading, bird safety, decoration. Frit coverage 20-60%.
Etched/Sandblasted: Acid or abrasive surface treatment for translucency/privacy. VLT reduction 5-15%.
Dichroic: Vacuum-deposited metallic layers create color-shifting effects. Transmitted and reflected colors are complementary.
Copper:
Bronze:
Total carbon = Embodied carbon (A1-A5, B1-B5, C1-C4) + Operational carbon (B6-B7)
As buildings become more energy-efficient, embodied carbon becomes the dominant component (50-80% of whole-life carbon for Passive House-standard buildings).
Product Stage (A1-A3):
Construction Stage (A4-A5):
Use Stage (B1-B7):
End-of-Life Stage (C1-C4):
Beyond Life (Module D):
LETI (London Energy Transformation Initiative) Targets:
| Building Type | 2020 Target (kgCO2e/m² GIA) | 2030 Target | Notes |
|---|---|---|---|
| Office | < 600 | < 350 | A1-A5 upfront carbon |
| Residential | < 500 | < 300 | A1-A5 upfront carbon |
| School | < 500 | < 300 | A1-A5 upfront carbon |
| Retail/Warehouse | < 550 | < 350 | A1-A5 upfront carbon |
RIBA 2030 Climate Challenge:
IStructE Targets (structure only):
| Material | Unit | Embodied Carbon (kgCO2e) | Notes |
|---|---|---|---|
| Concrete (C30/37, OPC) | per m³ | 180-240 | 30-50% GGBS replacement reduces to 100-150 |
| Structural steel (primary) | per kg | 1.55 | World average; UK ~2.0 |
| Structural steel (recycled, EAF) | per kg | 0.47 | Electric arc furnace, 100% scrap |
| Steel rebar | per kg | 1.40 | Often high recycled content |
| Softwood timber (sawn) | per kg | -1.0 to -1.6 | Carbon sequestration exceeds processing |
| CLT panel | per m³ | -500 to -700 | Including biogenic carbon |
| Glulam | per m³ | -450 to -600 | Including biogenic carbon |
| Clay brick | per kg | 0.22 | Range 0.14-0.30 depending on kiln |
| Limestone (Portland) | per kg | 0.09 | Low processing energy |
| Aluminum (primary) | per kg | 8.20 | High energy; use recycled where possible |
| Aluminum (recycled) | per kg | 0.50 | 94% reduction from primary |
| Float glass | per kg | 0.86 | |
| Mineral wool insulation | per kg | 1.20 | |
| PIR insulation | per kg | 4.20 | High due to blowing agents |
| XPS insulation | per kg | 4.40 | Highest of insulation types |
| Wood fibre insulation | per kg | -1.10 | Carbon-negative |
| Plasterboard | per kg | 0.12 | Low carbon; recyclable |
| Copper | per kg | 2.70 | High recyclability offsets |
| Zinc | per kg | 3.10 | |
| ETFE | per kg | 6.50 | Very low quantity used per m² |
Material Passport: Digital record of all materials and components in a building — type, quantity, location, quality, toxicity, recyclability. Enables future recovery and reuse.
Circular Economy Principles for Architecture:
Exemplars of Circular Design:
